Deorbiter CubeSat mission design

This paper presents the mission design for a CubeSat-based active debris removal approach intended for transferring sizable debris objects from low-Earth orbit to a deorbit altitude of 100 km. The mission consists of a mothership spacecraft that carries and deploys several debris-removing nanosatellites, called Deorbiter CubeSats. Each Deorbiter is designed based on the utilization of an eight-unit CubeSat form factor and commercially-available components with significant flight heritage. The mothership spacecraft delivers Deorbiter CubeSats to the vicinity of a predetermined target debris, through performing a long-range rendezvous maneuver. Through a formation flying maneuver, the mothership then performs in-situ measurements of debris shape and orbital state. Upon release from the mothership, each Deorbiter CubeSat proceeds to performing a rendezvous and attachment maneuver with a debris object. Once attached to the debris, the CubeSat performs a detumbling maneuver, by which the residual angular momentum of the CubeSat-debris system is dumped using Deorbiter’s onboard reaction wheels. After stabilizing the attitude motion of the combined Deorbiter-debris system, the CubeSat proceeds to performing a deorbiting maneuver, i.e., reducing system’s altitude so much so that the bodies disintegrate and burn up due to atmospheric drag, typically at around 100 km above the Earth surface. The attitude and orbital maneuvers that are planned for the mission are described, both for the mothership and Deorbiter CubeSat. The performance of each spacecraft during their operations is investigated, using the actual performance specifications of the onboard components. The viability of the proposed debris removal approach is discussed in light of the results.     

俯斜墙背条件下朗肯与库伦土压力理论的研究

从挡土墙抗滑、抗倾覆安全系数和挡土墙的主动土压力两个角度，研究建立在朗肯土压力理论与库伦土压力理论基础上的不同主动土压力计算方法所带来的误差，认为在俯斜的挡土墙墙背条件下，应使用抗滑、抗倾覆安全系数来判断土压力计算方法是否合理。     

Astrophysics in 2006

The fastest pulsar and the slowest nova; the oldest galaxies and the youngest stars; the weirdest life forms and the commonest dwarfs; the highest energy particles and the lowest energy photons. These were some of the extremes of Astrophysics 2006. We attempt also to bring you updates on things of which there is currently only one (habitable planets, the Sun, and the Universe) and others of which there are always many, like meteors and molecules, black holes and binaries.     

移动刚体激励下弹性梁的振动及其主动控制研究

本文研究了移动刚体激励下弹性梁的振动响应，以简支一弹怀支承梁为例进行了分析计算和实验研究。进而又提出了对弹性梁振动的最优控制方案，并进行了相应的仿真计算和实验研究。所有的实验结果同分析计算结果完全一致。     

基于特征模型的挠性悬臂板控制

针对航天器上太阳帆板这种悬臂外伸薄板结构的挠性附件 ,存在环境扰动下所引起的振动 ,本文采用压电智能结构作为执行器对悬臂板进行主动振动控制。基于板系统的特征建模 ,并结合自适应控制对挠性板的主动控制进行了研究。通过仿真研究结果与应变律反馈控制比较 ,表明该方法的有效性     

直接力与气动力复合控制系统姿态稳定问题研究

大气层内直接力与气动力复合控制导弹具有响应快速、可用过载大等优点，可以拦截高速、高机动性目标。研究制导末端轨控直接力与气动力复合系统姿态稳定问题。首先分析了复合系统的特点和控制问题，建立了控制模型。然后应用扩张状态观测器观测对象模型内扰和外扰的实时作用量，进行反馈补偿，实现了动态线性化。最后设计了非平滑反馈控制律，从而实现了复合系统的姿态控制设计。仿真结果表明，系统具有良好的动态性能和稳态性能，控制器具有很强的鲁棒性。     

Multi-mode optimal fuzzy active vibration control of composite beams laminated with photostrictive actuators

Firstly, a multi-field coupling finite element formulation of composited beam laminated with the photostrictive actuators is developed in this paper. Moreover, an optimal fuzzy active control algorithm is also proposed on the basis of the combination of optimal control and fuzzy one.This method opens a new avenue to resolve the contradiction between the linear system control method and nonlinear actuating characteristics of photostrictive actuators. The desired control for suppressing multi-modal vibration of photoelectric laminated beam is firstly obtained through optimal control and then the fuzzy control is used to approach the desired mechanical strain induced by photostrictive actuators. Thus, the multi-mode vibration control of beam is realized.In the design process of optimal fuzzy controller, the design of fuzzy control is independent of optimal control. The simulation results demonstrate that the proposed control method can effectively realize multi-modal vibration control of photoelectric laminated beams, and the control effect of optimal fuzzy control is better than that of optimal state feedback control.     

Application of improved active disturbance rejection control algorithm in tilt quad rotor

The Tilt Quad Rotor (TQR) has complex dynamics characteristics, especially in conversion mode. It is difficult to build the dynamic model of the TQR and the environmental factors have a great influence on it. To solve the problem of control in conversion mode of TQR, this paper carries out the design of the controller based on improved Active Disturbance Rejection Control (ADRC). According to the characteristics of flight in conversion mode, Tracking Differentiator (TD) with explicit model is used to solve the problem of multiple integrals when the system is high-order system. Extended State Observer (ESO) with Radial Basis Function (RBF) neural network is used to estimate and compensate for internal and external uncertainties, and the adaptive sliding mode control in Nonlinear State Error Feedback (NLSEF) is used to improve the response speed of the controller and reduce the parameters which should be tuned. Through the flight control simulation of the TQR, the validity and rationality of the control system are verified.     

一种主动悬架式火星车稳定裕度优化控制策略

针对火星车在非结构化环境下行驶存在的稳定性不足而导致倾覆的风险，提出针对一种六轮主动悬架式火星车的稳定裕度优化控制方法。首先，考虑了火星车悬架机构调整过程中车轮与接触地面滑移和侧倾等运动关系，建立和完善了六轮主动悬架式火星车行驶的运动学模型。然后，以火星车夹角调整机构角度为变量，推导火星车在非结构环境下的稳定裕度模型。之后，使用内点法求解火星车稳定裕度的最优解，并获得期望的夹角调整机构关节角度。在此基础上，对夹角调整机构的关节角度进行规划和控制，实现火星车悬架机构构型的调整，从而提高火星车在非结构化环境下行驶的稳定裕度。最后，对火星车稳定裕度优化控制策略的有效性进行仿真验证，结果表明，所提出的控制方法可有效提高火星车在非结构化环境下行驶的稳定裕度。     

直升机舱内噪声主动控制技术研究

随着社会的发展和科学技术的进步,驾乘人员对直升机的舒适性提出了更高的要求,该要求使舒适性成为直升机产品竞争性的要素之一.而将直升机舱内振动与噪声保持在较低的水平则是满足舒适性的重要条件.本文针对直升机舱内噪声主动控制的研究进展进行了概述.首先简要介绍了直升机舱内噪声的产生与频谱特征,以及常见的噪声控制方法;之后针对主动噪声控制进行了分类,分别按照主动消声控制技术和主动结构声振控制技术进行了归纳总结,并讨论了所采用主动控制律的发展趋势;最后对直升机舱内噪声主动控制的发展进行了展望.