Scientific objectives and payloads of Tianwen-1, China’s first Mars exploration mission

This paper describes the scientific objectives and payloads of Tianwen-1, China’s first exploration mission to Mars. An orbiter, carrying a lander and a rover, lifted-off in July 2020 for a journey to Mars where it should arrive in February 2021. A suite of 13 scientific payloads, for in-situ and remote sensing, autonomously commanded by integrated payload controllers and mounted on the orbiter and the rover will study the magnetosphere and ionosphere of Mars and the relation with the solar wind, the atmosphere, surface and subsurface of the planet, looking at the topography, composition and structure and in particular for subsurface ice. The mission will also investigate Mars climate history. It is expected that Tianwen-1 will contribute significantly to advance our scientific knowledge of Mars.     

宽带高集成多级射频互连技术

针对微波电路三维集成结构的迫切需求,开展宽带高集成多级射频互连技术研究。主要设计了两种电路结构,多级水平互连电路与多级垂直互连电路。多级水平互连电路中,通过优化同轴-微带线的水平过渡以及倒角过渡方式,得到在DC～30GHz内的仿真结果,回波损耗优于21dB,插入损耗优于0.16dB;多级垂直互连电路中,通过优化BGA板间互连结构,得到在DC～30GHz内的仿真结果,信号的回波损耗优于13dB,插入损耗优于0.57dB。在小型化、高集成的需求下,宽带高集成多级射频互连技术是解决宽带射频信号传输问题的关键技术路径,可以广泛应用在微波电路三维集成结构中,具有重大的应用前景。     

SSPS-OMEGA超大型球形聚光器结构拓扑构型与设计

为同时兼顾千米量级尺度空间太阳能电站聚光系统的在轨发射安装难度、光学收集效率、稳定性及结构工艺等多方面的因素，提出采用基于球面正多面体的经纬线划分法模块化构建球形聚光器。该方法不仅可实现基础划分单元分布均匀、规格种类少，降低在轨构建与运载发射难度。而且只要合理控制弧高等分数和基础划分单元的口径就可以同时保证聚光系统的光学收集效率。理论与仿真结果显示，当弧高等分数为24时，该划分法共有25种基础单元件，整个球面被分成5762块。并且此时模块化构建的实际球形聚光器的光学收集效率与理想球面相比基本保持不变，解决了太阳能电站聚光系统设计中存在的关键问题。     

跨介质航行器流体动力外形仿生设计

跨介质航行器是一种可在空中与水中两栖巡航并能自由穿越水气界面的新概念海空两栖无人运动平台,需要具备良好的入水和出水性能及较小的水下流体阻力。采用两种生物组合仿生的设计思想,利用全自动三维影像扫描仪获取具有优良入水性能的翠鸟头部和龙虱身体的形体特征点云数据,应用傅立叶级数拟合方法拟合特征曲线,设计了一种跨介质航行器流体动力外形,为减小航行器入水冲击载荷、降低水下航行阻力提供了设计方案。     

基于LSTMAttention网络的短期风电功率预测

提出一种基于LSTMAttention网络的短期风电功率预测方法。首先,使用LSTM网络对数值天气预测(NWP)数据的特征信息进行提取,同时采用注意力机制有效分析了模型输入与输出的相关性,从而获取了更多重要时间的整体特征；其次,使用卷积神经网络(CNN)提取NWP数据的局部特征,并引入压缩和奖惩网络(SE)模块学习特征权重,利用特征重新标定方式提高网络表示能力；最后,将局部特征和整体特征进行特征融合,通过分类器输出分类结果。利用NOAA提供的美国加利福尼亚州某风电场的数据进行案例分析,证明了所提方法的有效性。试验结果表明,与BP神经网络、自回归积分滑动平均模型(ARIMA)模型和LSTM模型相比,LSTMAttention模型具有更高的预测精度,证明了该方法的有效性。     

A New D-GCL for Unidirectional Motion with Large Displacement

Numerical simulations of unsteady flow problems with moving boundaries commonly require the use of geometric conservation law(GCL).However,in cases of unidirectional large mesh deformation,the cumulative error caused by the discrete procedure in GCL can significantly increase,and a direct consequence is that the calculated cell volume may become negative.To control the cumulative error,a new discrete GCL(D-GCL)is proposed.Unlike the original D-GCL,the proposed method uses the control volume analytically evaluated according to the grid motion at the time level n,instead of using the calculated value from the D-GCL itself.Error analysis indicates that the truncation error of the numerical scheme is guaranteed to be the same order as that obtained from the original D-GCL,while the accumulated error is greatly reduced.For validation,two challenging large deformation cases including a rotating circular cylinder case and a descending GAW-(1)two-element airfoil case are selected to be investigated.Good agreements are found between the calculated results and some other literature data,demonstrating the feasibility of the proposed D-GCL for unidirectional motions with large displacements.     

Design and analysis of a truss deployable antenna mechanism based on a 3UU-3URU unit

Space deployable structures with large calibers, high accuracy, and large folding ratios are indispensable equipment in the aerospace field. Given that the single-DOF 3RR-3RRR deployable unit cannot be fully folded, this study proposes a 3UU-3URU deployable unit with two kinds of DOF: folding movement and orientation adjustment. First, based on the G-K formula, the DOF of the 3UU-3URU unit is analyzed. Then, the 3UU-3URU unit is used to construct a deployable truss antenna with a curved surface, and the DOF of the whole deployable antenna containing multiple 3UU-3URU units is calculated. The structural design of a deployable antenna with two loops is carried out with specific parameters and geometric relations. Next, a DOF simulation of a basic combination unit composed of three 3UU-3URU units is performed. Finally, a prototype of the basic combination unit is manufactured, and the DOF of the mechanism is experimentally verified.     

基于子阵级非周期的有限扫描阵列研究

对基于子阵级非周期的有限扫描阵列进行研究,采用数值仿真和遗传算法对基于不同子阵规模的非周期阵列进行优化设计,分析4?4和2?2两种子阵规模对接收多波束应用中伴随波束方向图的影响,研究表明子阵规模过大会引起伴随波束方向图的旁瓣抬升,通过减小子阵规模可以避免该问题,论证了设计的基于2?2子阵的非周期八角阵可应用于有限视场扫描相控阵中。     

Stability of relative equilibria of the full spacecraft dynamics around an asteroid with orbit–attitude coupling

The full dynamics of spacecraft around an asteroid, in which the spacecraft is considered as a rigid body and the gravitational orbit–attitude coupling is taken into account, is of great value and interest in the precise theories of the motion. The spectral stability of the classical relative equilibria of the full spacecraft dynamics around an asteroid is studied with the method of geometric mechanics. The stability conditions are given explicitly based on the characteristic equation of the linear system matrix. It is found that the linearized system decouples into two entirely independent subsystems, which correspond to the motions within and outside the equatorial plane of the asteroid respectively. The system parameters are divided into three groups that describe the traditional stationary orbit stability, the significance of the orbit–attitude coupling and the mass distribution of the spacecraft respectively. The spectral stability of the relative equilibria is investigated numerically with respect to the three groups of system parameters. The relations between the full spacecraft dynamics and the traditional spacecraft dynamics, as well as the effect of the orbit–attitude coupling, are assessed. We find that when the orbit–attitude coupling is strong, the mass distribution of the spacecraft dominates the stability of the relative equilibria; whereas when the orbit–attitude coupling is weak, both the mass distribution and the traditional stationary orbit stability have significant effects on the stability. We also give a criterion to determine whether the orbit–attitude coupling needs to be considered.     

某型飞机后边条焊接盒段优化研究

某型飞机后边条焊接盒段是用于安装平尾的重要受力构件,由材料为30CrMnSiA的板弯件、机加件及加强筋焊接组合而成。由于盒段焊缝数量多、零件壁厚薄,故在组合焊接时容易出现焊接变形、变形后校形困难等问题,使焊缝质量难以保证。本文对焊接盒段结构方案进行了优化研究,在最终选定的结构优化方案中,其盒段壁板为整体机加成型,大量采用机械连接,焊缝数量少,焊接形式简单,缩短了盒段的焊接周期,改善了焊接盒段生产的工艺性,满足了该型号飞机的批产要求。