钛合金表面抗激光涂层损伤特性及热效应影响研究

实验研究了钛合金和高反射型陶瓷涂层材料抗连续型激光烧蚀的损伤及温度分布特性，并从热效应影响角度对比分析了二者在抗激光损伤效果方面的差异性。研究结果表明：相比于钛合金，高反射型陶瓷涂层材料能有效增强钛合金基底抗激光损伤的能力；在同等激光功率密度辐照下，陶瓷涂层材料能有效提升钛合金基底耐受激光辐照的时间长度。实验结果表明该陶瓷涂层材料的激光损伤阈值比钛合金高约5.8倍。实验发现陶瓷涂层温升速率高于钛合金，但由于陶瓷材料具有较高的反射特性，以及良好的热吸收和热传导特性，因此能使由激光辐照产生的热量在其表面较快地扩散，而降低向基底方向传导的程度，最终提升陶瓷涂层的抗激光损伤阈值。     

抗辐照通用扩展SiP芯片设计

研究微小卫星综合电子系统的SiP技术实现方法。首先介绍微小卫星综合电子系统结构的组成和采用SiP技术的必要性，然后对综合电子系统进行功能模块划分，并对其通用扩展模块进行详细的SiP设计，包括抗辐照器件选型、原型验证、SiP原理图、基板管壳一体化设计、建模仿真、制造加工、实装测试验证等，通过SiP技术实现了一种星载综合电子系统中通用扩展SiP芯片产品，经过实际验证测试，在保证模块功能和性能的前提下，整体模块重量从230 g减轻到48 g，体积由180 mm?130 mm?17 mm减小到46 mm?46 mm?8 mm，很好地满足了星载功能模块小型化、轻量化设计需求。     

反推装置对翼身融合分布式推进系统气动性能影响数值模拟

为了研究新型反推装置对翼身融合分布式推进系统气动性能的影响,将机身简化为二维模型,利用数值模拟的手段来研究攻角、反推开度,以及风扇打开或关闭对飞行参数的影响,为翼身融合分布式推进系统的反推装置设计提供初步的意见和建议。结果显示:反推闭合和风扇打开之后该机型的升力系数和俯仰力矩系数都会有较大增加;随着反推开度的增加,升力系数和俯仰力矩系数也随之增加;来流攻角对翼身融合分布式推进系统的气动性能也有较大影响。      

Simulation and Analysis of Electromagnetic Force in Laser Melting Deposition by Electromagnetic Impact

Magnetic field was introduced in laser melting deposition to reduce the pores in workpieces.Finite 3-D model of the coil-deposition layer-substrate was established.Simulation results show that the electromagnetic force in deposition layer mainly concentrates in the projection area of the coil.Axial electromagnetic force shows repulsion in one cycle.The experimental results indicate that the magnetic field is beneficial for grain refinement,microhardness increasement and decline of quantities and average sizes of pores.     

Performance evaluation for MAP state estimate fusion

This paper presents a quantitative performance evaluation method for the maximum a posteriori (MAP) state estimate fusion algorithm. Under ideal conditions where data association is assumed to be perfect, it has been shown that the MAP or best linear unbiased estimate (BLUE) fusion formula provides the best linear minimum mean squared estimate (LMMSE) given local estimates under the linear Gaussian assumption for a static system. However, for a dynamic system where fusion is recursively performed by the fusion center on local estimates generated from local measurements, it is not obvious how the MAP algorithm will perform. In the past, several performance evaluation methods have been proposed for various fusion algorithms, including simple convex combination, cross-covariance combination, information matrix, and MAP fusion. However, not much has been done to quantify the steady state behavior of these fusion methods for a dynamic system. The goal of this work is to present analytical fusion performance results for MAP state estimate fusion without extensive Monte Carlo simulations, using an approach developed for steady state performance evaluation for track fusion. Two different communication strategies are considered: fusion with and without feedback to the sensors. Analytic curves for the steady state performance of the fusion algorithm for various communication patterns are presented under different operating conditions.     

OPTIMUM GRASPING PLANNING FOR MULTIFINGERED DEXTROUS HANDS BASED ON THE ASYMPTOTICAL STABILITY

ＯＰＴＩＭＵＭＧＲＡＳＰＩＮＧＰＬＡＮＮＩＮＧＦＯＲＭＵＬＴＩＦＩＮＧＥＲＥＤＤＥＸＴＲＯＵＳＨＡＮＤＳＢＡＳＥＤＯＮＴＨＥＡＳＹＭＰＴＯＴＩＣＡＬＳＴＡＢＩＬＩＴＹ￥ＹａｎｇＹａｎｇ；ＬｕＺｈｅｎ；ＺｈａｎｇＱｉｘｉａｎ（ＲｏｂｏｔｉｃｓＲｅｓｅａ...     

一种用于FM-FM遥测系统的测试信号源

介绍一种满足IRIG标准的FM- FM 调频信号源。根据试验结果,证明这种信号源不仅性能稳定,而且具有很好的灵活性。在各类符合IRIG标准FM- FM 体制遥测接收机的研制中具有一定的实用价值     

液氧/煤油发动机试车热敏电阻测温技术

在温度测量中,需要根据不同参数的测量要求,选择适合的温度传感器及相应的测量、校验、数据处理方法.本文介绍了在液氧/煤油发动机试车中,使用热敏电阻传感器进行液氧温度准确测量的技术.     

三角面元灰度图象三维重建算法研究

三角面元SFS算法是结合三角面元模型和线性反射图来阐述SFS问题的,该算法的基本思想是用三角面元素来近似光滑表面,并用一系列基于节点的线性方程组合来表达该表面。本文在此算法的基础上,求解时通过加权平均迭代,提高了恢复的准确性和迭代的收敛速度。