Ionospheric total electron content response to annular solar eclipse on June 21, 2020

The effects of physical events on the ionosphere structure is an important field of study, especially for navigation and radio communication. The paper presents the spatio-temporal ionospheric TEC response to the recent annular solar eclipse on June 21, 2020, which spans across two continents, Africa and Asia, and 14 countries. This eclipse took place on the same day as the June Solstice. The Global Navigation Satellite System (GNSS) based TEC data of the Global Ionosphere Maps (GIMs), 9 International GNSS Service (IGS) stations and FORMOSAT-7/COSMIC-2 (F7/C2) were utilized to analyze TEC response during the eclipse. The phases of the TEC time series were determined by taking the difference of the observed TEC values on eclipse day from the previous 5-day median TEC values. The results showed clear depletions in the TEC time series on June 21. These decreases were between 1 and 9 TECU (15–60%) depending on the location of IGS stations. The depletions are relatively higher at the stations close to the path of annular eclipse than those farther away. Furthermore, a reduction of about ?10 TECU in the form of an equatorial plasma bubble (EPB) was observed in GIMs at ~20° away from the equator towards northpole, between 08:00–11:00 UT where its maximum phase is located in southeast Japan. Additionally, an overall depletion of ~10% was observed in F7/C2 derived TEC at an altitude of 240 km (hmF2) in all regions affected by the solar eclipse, whereas, significant TEC fluctuations between the altitudes of 100 km ? 140 km were analyzed using the Savitzky-Golay smoothing filter. To prove TEC depletions are not caused by space weather, the variation of the sunspot number (SSN), solar wind (V_SW), disturbance storm-time (Dst), and Kp indices were investigated from 16th to 22nd June. The quiet space weather before and during the solar eclipse proved that the observed depletions in the TEC time series and profiles were caused by the annular solar eclipse.     

Optimization Based on Convergence Velocity and Reliability for Hydraulic Servo System

This article presents an optimal hybrid fuzzy proportion integral derivative (HFPID) controller based on combination of proportion integral derivative (PID) and fuzzy controllers, by which the parameters could be evaluated by global optimization either in convergence velocity or in convergence reliability. Focusing on the nonlinear factors of hydraulic servo system, this article takes advantage of PID and fuzzy logic controller integrated with scaling factors to acquire precise tracking performances. To further improve the performances, it provides new developed optimization with rapid convergence to attain reliable approach probability. Focusing on the performance indictors of evolutionary algorithm, this article presents a new technique to predict reliability of the optimization algorithm. Statistics authenticates the effectiveness and robustness of the optimization. Further, many simulation and experimental results indicate that the optimal HFPID could acquire perfect immunity against parametric uncertainties with external disturbance.     

优化复合推进剂力学与流变性能的一种新方法

测量与理论分析了复合推进剂的黏性与力学性能。实验研究了固体粒子尺寸分布和粘合剂固化比的影响。应用聚合物流变学的理论与概念来模拟推进剂特性。研究得知,细AP粒子在聚合物基体中起有效的填充剂作用,并增强机体的性能。对所研究的推进剂系列配方,当细AP含量接近20%时推进剂可达到最大应变与浇注中的最佳黏性。     

Small amplitude ion acoustic solitons in a weakly magnetized plasma with anisotropic ion pressure and kappa distributed electrons

The Zakharov–Kuznetzov (ZK) equation is derived for nonlinear electrostatic waves in a weakly magnetized plasma in the presence of anisotropic ion pressure and superthermal electrons. The anisotropic ion pressure is defined using Chew–Goldberger–Low (CGL) while a generalized Lorentzian (kappa) distribution is assumed for the non-thermal electrons. The standard reductive perturbation method (RPM) is employed to derive the two dimensional ZK equation for the dynamics of obliquely propagating low frequency ion acoustic wave. The influence of spectral index (kappa) of non-thermal electron on the soliton is discussed in the presence of anisotropic ion pressure in plasmas. It is found that ion pressure anisotropy and superthermality of electrons affect both the width and amplitude of the solitary waves. On the other hand the magnetic field is found to alter the dispersive property of the plasma only, and hence the width of the solitons is affected while the amplitude of the solitary waves is independent of external magnetic field. The numerical results are also presented for illustrations.     

Impact of local and global factors and meteorological parameters in temporal variation of atmospheric potential gradient

In this research work, we have performed comparative diurnal variations of atmospheric Potential Gradient (PG) of fair-weather days by using the data of three stations installed in Northern, Pakistan for the year 2018. We investigated the impact of both local and global factors and meteorological parameters in the diurnal variation of atmospheric Potential Gradient on the annual and seasonal time scale. We observed two peaks, primary and secondary. This is because of the land-based measurements of annual and seasonal variations. The annual average curve of Potential Gradient of all three stations: Islamabad (CES), Muzaffarabad (MZF), and Balakot (BKT) demonstrated a notable deviation from the standard oceanic Carnegie curve. The atmospheric Potential Gradient variations are due to numerous meteorological factors e.g., air pollution, humidity, aerosol particles, fog, and temperature. Among three stations, the MZF station is located in highland (mountainous) and it demonstrated a higher atmospheric Potential Gradient. We further differentiate the results of our three stations with global results for authenticity and observed coherence between them. In addition, a positive correlation of fair-weather Potential Gradient is observed with temperature and a notable correlation between relative humidity and atmospheric Potential Gradient for all the three observatories.     

Regional gravity field model in Pakistan area from the combination of CHAMP,GRACE and ground data using least squares collocation: A case study

This study describes a methodology of recovery of the Earth’s gravity field from CHAMP and GRACE satellites data in Pakistan using least squares collocation (LSC) based downward continuation technique. The CHAMP height anomalies and GRACE gravity disturbances derived from the observed satellite data have been used in combination solution using LSC with observed gravity values at the Earth surface. The combined covariance functions of height anomalies and/or gravity disturbances at satellite altitudes and observed gravity anomalies at Earth surface have been used as the basis for combination and downward continuation solution. The variance of predicted gravity anomalies from GRACE gravity disturbances is relatively lower than the corresponding results of gravity anomalies from CHAMP height anomalies. This fact may be attributed partly to the amplification of noise and partly to the unstable inverse transformation process of height anomalies to gravity anomalies. The impact of data error variance has been studied in the context of smoothing and noise reduction in the final solution of downward continuation using least squares collocation. The raising of data error suppresses the noise and as a result a smooth final solution is obtained. The prediction results appear to be dependent on the quality of data and goodness of combined covariance function, which are fairly comparable for the CHAMP and GRACE data. The recovered gravity field from satellite data appears to contribute mainly to medium and long wavelength parts of total gravity field spectrum. Due to flexibility of data handling in least squares collocation, this procedure is applicable to any observable of gravity field being at different altitudes and with different data spacing.     

Variation of hmF2 and NmF2 deduced from DPS-4 over Multan (Pakistan) and their comparisons with IRI-2012 & IRI-2016 during the deep solar minimum between cycles 23 & 24

We report the results of ionospheric measurements from DPS-4 installed at Multan (Geog coord. 30.18°N, 71.48°E, dip 47.4°). The variations in F2-layer maximum electron density NmF2 and its peak height hmF2 are studied during the deep solar minimum between cycles 23 & 24 i.e 2008–2009 with comparisons conducted with the International Reference Ionosphere (IRI) versions 2012 & 2016. We find that the hmF2 observations peak around the pre-sunrise and sunrise hours depending on the month. Seasonally, the daytime variation of NmF2 is higher in the Equinox and Summer, while daytime hmF2 are slightly higher in the Equinox and Winter. High values of hmF2 around midnight are caused by an increase of upward drifts produced by meridional winds. The ionosphere over Multan, which lies at the verge of low and mid latitude, is affected by both $E\times B$ drifts and thermospheric winds as evident from mid-night peaks and near-sunrise dips in hmF2. The results of the comparison of the observed NmF2 and hmF2 for the year 2008–2009 with the IRI-2012 (both NmF2 and hmF2) and IRI-2016 (only hmF2) estimates indicate that for NmF2, IRI-2012 with Consultative Committee International Radio (CCIR) option produces values in better agreement with observed data. Whereas, for hmF2, IRI-2016 with both International Union of Radio Science (URSI) and CCIR SHU-2015 options, predicts well for nighttime hours throughout the year. However, the IRI-2012 with CCIR option produces better agreement with data during daytime hours. Furthermore, IRI-2012 with CCIR option gives better results during Equinox months, whereas, IRI-2016 with both URSI and CCIR SHU-2015 options predict well for Winter and Summer.     

Evaluation of three high-resolution satellite precipitation estimates: Potential for monsoon monitoring over Pakistan

Multi-sensor precipitation datasets including two products from the Tropical Rainfall Measuring Mission (TRMM) Multi-satellite Precipitation Analysis (TMPA) and estimates from Climate Prediction Center Morphing Technique (CMORPH) product were quantitatively evaluated to study the monsoon variability over Pakistan. Several statistical and graphical techniques are applied to illustrate the nonconformity of the three satellite products from the gauge observations. During the monsoon season (JAS), the three satellite precipitation products captures the intense precipitation well, all showing high correlation for high rain rates (>30 mm/day). The spatial and temporal satellite rainfall error variability shows a significant geo-topography dependent distribution, as all the three products overestimate over mountain ranges in the north and coastal region in the south parts of Indus basin. The TMPA-RT product tends to overestimate light rain rates (approximately 100%) and the bias is low for high rain rates (about ±20%). In general, daily comparisons from 2005 to 2010 show the best agreement between the TMPA-V7 research product and gauge observations with correlation coefficient values ranging from moderate (0.4) to high (0.8) over the spatial domain of Pakistan. The seasonal variation of rainfall frequency has large biases (100–140%) over high latitudes (36N) with complex terrain for daily, monsoon, and pre-monsoon comparisons. Relatively low uncertainties and errors (Bias ±25% and MAE 1–10 mm) were associated with the TMPA-RT product during the monsoon-dominated region (32–35N), thus demonstrating their potential use for developing an operational hydrological application of the satellite-based near real-time products in Pakistan for flood monitoring.     

An iterative approach for modal analysis of solid rocket motor incorporating frequency dependent modulus

The modulus of viscoelastic materials varies with excitation frequency.However,during modal analysis of frequency dependent materials,a material evaluation frequency is necessary because stiffness cannot be modified during eigenfrequency procedure.As a result,only those vibration modes are accurate,of which eigenfrequency is close to the material evaluation frequency.In order to obtain vibration modes of solid rocket motor (SRM) using material modulus based on frequency which is the same as the eigenfrequency,an iterative approach was proposed.Results of the iterative technique show that frequency modes obtained from the method are in complete agreement with the eigenfrequency and material evaluation frequency.