星载激光通信终端在轨机动对温度影响

对激光通信终端在轨瞬态温度变化开展了仿真，以期研究在轨机动的影响、热分析和热试验时机动模式的简化模拟。通过合理地分析与简化，建立终端的轨道热分析模型，准确模拟在轨机动，根据典型机动模式、外热流和涂层退化等因素设计了计算工况，得出了终端在轨运行过程中的温度场随时间和姿态变化规律。结果表明：不同机动模式下的温度变化存在差异，最大可达23.0℃，采用固定姿态或一维转动的简化热分析或热试验不能准确模拟实际飞行温度，甚至不能部分替代二维转动热分析或热试验；光学天线和反射镜的温度控制是制约终端工作的瓶颈，为终端设计合适的避光机动策略，可大幅度提高温度稳定度和均匀度。研究结果可以为光机电设备在轨机动策略的设计和改进提供参考。     

Impact of rain on wave retrieval from Sentinel-1 synthetic aperture radar images in tropical cyclones

The main objective of our work was to investigate the impact of rain on wave observations from C-band (~5.3 GHz) synthetic aperture radar (SAR) in tropical cyclones. In this study, 10 Sentinel-1 SAR images were available from the Satellite Hurricane Observation Campaign, which were taken under cyclonic conditions during the 2016 hurricane season. The third-generation wave model, known as Simulating WAves Nearshore (SWAN) (version 41.31), was used to simulate the wave fields corresponding to these Sentinel-1 SAR images. In addition, rainfall data from the Tropical Rainfall Measuring Mission satellite passing over the spatial coverage of the Sentinel-1 SAR images were collected. The simulated results were validated against significant wave heights (SWHs) from the Jason-2 altimeter and European Centre for Medium-Range Weather Forecasts data, revealing a root mean square error (RMSE) of ~0.5 m with a 0.25 scatter index. Winds retrieved from the VH-polarized Sentinel-1 SAR images using the Sentinel-1 Extra Wide-swath Mode Wind Speed Retrieval Model after Noise Removal were taken as prior information for wave retrieval. It was discovered that rain did indeed affect the SAR wave retrieval, as evidenced by the 3.21-m RMSE of SWHs between the SAR images and the SWAN model, which was obtained for the ~1000 match-ups with raindrops. The raindrops dampened the wave retrieval when the rain rate was < ~5 mm/hr; however, they enhanced wave retrieval for higher rain rates. It was also found that the portion of the rain-induced ring wave with a wave number > 0.05 rad/m (~125 m wavelength) was clearly observed in the SAR-derived wave spectra.     

电铸镍Wolter I型光学系统制造技术发展综述

摘要： 为满足未来脉冲星导航和空间天文观测任务对X射线望远镜的载荷需求，Wolter I光学系统的研制正逐渐成为新的研究热点，电铸镍方案是当前国内外X射线光学系统镜筒制造的主要技术方案.文章对电铸镍X射线光学系统制造工艺、国内外研制现状、未来应用需求进行了介绍和整理，梳理了电铸镍X射线光学系统研制遇到的关键技术和难点，提出了后续研究发展建议，以促进中国在 X射线脉冲星自主导航、空间探测领域的快速发展.     

高超声速飞行器再入段LQR自抗扰控制方法设计

针对高超声速飞行器(HSV)再入过程中强非线性、强耦合、气动参数变化剧烈的不确定性的特点，提出一种基于线性二次型调节器(LQR)和自抗扰控制(ADRC)的高超声速飞行器再入段的姿态控制方法。首先，建立高超声速飞行器再入段线性化模型，并采用LQR方法完成了状态反馈控制律设计。然后，结合自抗扰控制技术，设计了扩张状态观测器(ESO)对系统的模型不确定性和外部干扰进行补偿，大幅增强了系统的扰动抑制能力。最后，将得到的高超声速飞行器再入段LQR自抗扰姿态控制器(LQRADRC)应用于高超声速飞行器六自由度仿真，仿真结果表明本文所提出的控制方法能够快速、精确地跟踪角位置指令，并且对系统不确定性具有强鲁棒性。     

一种应用于超小型无人机的新型定高传感器

使用美国ICSENSOR公司的压阻硅式绝压传感器，对静压进行测量，并设计出适合超小型无人机使用的新型定高传感器，这种定高传感器具有灵敏度高，重量轻，单电源供电，板式结构。可靠性高，重复性好的特点，填补了应用于超小型无人机的定高传感器产品的空白。     

Summary of CNCOSPAR Activities 2002-2004

1 In Brief In this report, we summarize the major activities of CNCOSPAR from the year 2002to 2004. During this period, many things happened such as Beijing won the 2006COSPAR scientific assembly, the first Chinese Committee of COSPAR handed over its responsibility to the second committee, etc. During this period, the space science activities developed also very fast. China has sent its first scientific satellite, the first satellite TC-1 of the Double Star Program, into space. China also has a major break through in the manned space flight by a very successful mission of Shenzhou manned space flight. On board of this spacecraft, is the first Chinese astronaut Mr. Liwei Yang. This made China the third country in the world who has the ability that the launch manned space missions independently.     

一种可伸缩空间机械臂及其应用分析

介绍一种能够完成多关节型空间机械臂所能承担的大部分空间任务 ,而且应用更简便的可伸缩空间机械臂 ,对其空间应用做出了一些设想 ,简单讨论了其应用的一些相关问题 ,肯定了其可行性和实用性。