Far-UVC light as a new tool to reduce microbial burden during spacecraft assembly

This work aims to investigate far-UVC light at 222 nm as a new microbial reduction tool for planetary protection purposes which could potentially be integrated into the spacecraft assembly process. The major advantage of far-UVC (222 nm) compared to traditional germicidal UVC (254 nm) is the potential for application throughout the spacecraft assembly process in the presence of humans without adverse health effects due to the limited penetration of far-UVC light into biological materials. Testing the efficacy of 222-nm light at inactivating hardy bacterial cells and spores isolated from spacecraft and associated surfaces is a necessary step to evaluate this technology. We assessed survival of Bacillus pumilus SAFR-032 and Acinetobacter radioresistens 50v1 exposed to 222-nm light on proxy spacecraft surfaces simulated by drying the bacteria on aluminum coupons. The survival fraction of both bacteria followed a single stage decay function up to 60 mJ/cm², revealing similar susceptibility of both species to 222-nm light, which was independent of the exposure rate. Irradiation with far-UVC light at 222 nm is an effective method to decontaminate the proxy spacecraft materials tested in this study.     

Orbit-attitude-vibration coupled dynamics of tethered solar power satellite

A new orbit-attitude-vibration coupled dynamic model of the tethered solar power satellite (Tethered SPS) is established based on absolute nodal coordinate formulation. The Hamilton’s equation of the system is derived by introducing generalized momentum through Legendre transformation. The correctness of the proposed model is verified by an example. The dynamic characteristics of the Tethered SPS are studied using the symplectic Runge-Kutta method. Simulation results show that the orbital radius and the total energy of the system are well preserved. The attitude of the system is unstable when the mass of the bus system is small. However, the attitude stability is dependent on some other parameters of the system, which requires further studies. It is also found that the average tether force/deformation can be roughly estimated by simplifying the solar panel as a particle. The proposed model can be used to study the orbit-attitude-vibration coupled dynamics and control problems.     

Local Path Planning and Tracking Control of Vehicle Collision Avoidance System

Automotive collision avoidance technology can effectively avoid the accidents caused by dangerous traffic conditions or driver's manipulation errors.Moreover,it can promote the development of autonomous driving for intelligent vehicle in intelligent transportation.We present a collision avoidance system,which is composed of an evasive trajectory planner and a path following controller.Considering the stability of the vehicle in the conflict-free process,the evasive trajectory planner is designed by polynomial parametric method and optimized by genetic algorithm.The path following controller is proposed to make the car drive along the designed path by controlling the vehicle's lateral movement.Simulation results show that the vehicle with the proposed controller has good stability in the collision process,and it can ensure the vehicle driving in accordance with the planned trajectory at different speeds.The research results can provide a certain basis for the research and development of automotive collision avoidance technology.     

空间推进器制造中的可破坏性工装

由于航天研究的特殊性,其预研型号零件一般批量很小,并且有许多零件不易装夹。选用一种不同于传统专用工装的可破坏性工装,其材料可以是金属的,也可以是非金属的。为保证进度,必须建立预先性的可破坏性工装的数据库。采用可破坏性工装缩短了研制周期,降低了研制成本。     

高校特色期刊自组稿模式、问题及对策——以《民办教育研究》的组稿模式为例

特色学术期刊在长期的办刊过程中，根据自身的特点合理运用组稿手段组织稿件、优化稿源而形成了能体现办刊理念、突出期刊特色的选题计划指导下的自组稿模式。这些模式各有其长，也各有其适应对象，在组稿中也会存在一些问题。因此在运用这些组稿模式时，还要注意学术期刊工作与高校学科建设和科研工作的互动；准确定位，科学把握内外稿的刊发比例，彰显学术期刊的特色；利用学术优势，发挥学术期刊的人才培养功能。     

仿真实验转台变参数控制器设计与实现

首先介绍仿真试验OUT型闭式转台的组成特点,叙述了其控制器原理及在仿真试中的实现形式.     

减小固体火箭外壳板滚弯直线度误差的研究

如何减小固体火箭外壳板滚弯直线度误差是目前火箭生产工艺中的难题,在对最不利实际工况下三轴辊弯板机中心辊进给量沿自身轴线分布规律作系统的分析、计算及研究的基础上,推导出一项箭壳板滚弯直线度误差不等式,并针对此项不等式各参数变化规律,提出几项减小箭壳板滚弯直线度误差的行之有效的措施,可供火箭外壳设计及生产工艺人员参考。     

ERP在航天制造部门的实施初探

ERP是一种先进的生产管理系统,航天产品“小批量、多品种”的生产特点为ERP的实施提出了新的需求。文章介绍了ERP的特点、实施目的并根据航天某小型制造部门的生产特点,提出了实施措施及建议。只要各方协同努力,ERP在航天制造部门是能够成功发挥其应有作用的。     

Sustained data recording system based on disk array

Most sustained data recording systems in many real-time fields are based on tape equipments. We have developed an innovative sustained data recording system based on disk array which consists of Array Controller Module (ACM), String Controller Module (SCM) and Main Controller Module (MCM). This system has a better performance and higher reliability than the traditional tape recorder and can be used conveniently in many areas of data recording, storing, playback, and remote backup. This novel recording system has been used in radar data recorder for spacecraft orbit tracking and satellite remote sensing data recording successfully.