CAPP系统中特征造型描述法的应用

本文结合专为哈尔滨制氧机厂开发的实用型CAPP系统，对CAPP系统的研制进行了探索性的研究，该系统以Windows作为开发平台，在基于零件特征造型建模的基础上，运用面向对象编程技术完成了一个交互式信息输入子系统，实现了回转体零件CAPP系统的信息输入，这里主要介绍零件特征信息模型的建立与特征信息的数据结构。     

二次包封CMOS器件电子辐照实验研究

对CMOS器件54HCT00进行了复合材料的二次包封，研制了试验电路板，在器件加电工作下进行电子辐照试验的动态测试．结果表明，二次封装的器件抗总剂量的能力提高了1—2个数量级，得到了预期的数据和结果．这些工作为商用器件的空间开拓使用提供了很好的途径．     

大直径螺纹数控加工工艺研究与应用

针对形状结构复杂的某产品上34个M36×3-6H内螺纹加工进行了工艺攻关,提出采用旋风铣的方法,并编制数控加工程序,有效解决了难加工材料大直径内螺纹的加工难题,在此基础上实现了数控加工程序的参数化,理论上可以实现任意直径、任意螺距、任意深度螺纹的加工,并在其他型号产品上得到应用。     

Measurements of heat transfer and pressure in a trailing edge cavity of a turbine blade

 An experimental investigation is conducted to obtain the heat transfer and pressure drop data for an integral trailing edge cavity test section that simulates a novel turbine blade's internal cooling passage with bleed holes. Local heat transfer is measured on both the suction and pressure sides by a transient liquid crystal technique, while pressures at six positions are recorded by pressure calibrators. Moreover, flow characteristic and its effect on heat transfer are analyzed for conditions with or without bleed flow. The experimental results show that, in the cases with bleed flow, local heat transfer on the pressure side exceeds that on the suction side in the first and second channels. In the cases without bleed flow, in the first and third channels, local heat transfer on the suction side weakens whilst it increases significantly on the pressure side. For the second channel, non-bleed condition leads to a more balanced heat transfer distribution between the upstream and downstream channel. Besides, after the bleed holes are blocked, heat transfer in the first bend region on the suction side declines sharply, while the opposite phenomenon occurs for the second bend region on the pressure side. In both bleed and non-bleed cases, the total pressure of six measurement positions decreases continuously along the channel at the same Reynolds number and it promotes for higher Reynolds number. Among all the measurement points, under the same flow rate condition, the highest speed occurs at Position 5, which also shows the maximum difference between the total and static pressures. When the bleed holes are blocked, the total pressure at each measurement position appears to increase.     

低波段天基雷达射频干扰机理及抑制方法

天基合成孔径雷达(SAR)是一种重要的主动遥感设备,在测绘、目标警戒、资源探测等方面具有独特的全天时、全天候优势。但由于低波段电磁频谱异常拥挤复杂,也容易受到其他无线电设备的非蓄意射频干扰(RFI)。本文针对工作于P、L波段的天基SAR系统,分析其常见的地面射频干扰源及其干扰机理,并构建典型的窄带与宽带干扰模型,比较分析了频域陷波、最小均方(LMS)算法、自适应线谱增强(ALE)、特征子空间分解与时频滤波等多种干扰抑制算法,并在卫星实测数据的基础上进行仿真验证抑制宽带干扰的有效性。仿真结果表明:时频滤波算法抑制宽带干扰效果最好,造成的信号损失最小,能够为后续天基合成孔径雷达的抗干扰算法设计提供决策依据。     

建立虚拟现实空间的好助手-VRML

介绍了虚拟现实技术及VRML虚拟现实建模语言的概念,提出了用VRML虚拟现实建模语言设计软件时应该注意的一些问题,说明了用VRML虚拟现实建模语言设计的软件适用的范围,探讨了解决虚拟现实技术中存在问题的方法.     

Aircraft Engine Gas Path Fault Diagnosis Based on Hybrid PSO-TWSVM

Twin support vector machine(TWSVM)is a new development of support vector machine(SVM)algorithm.It has the smaller computation scale and the stronger ability to cope with unbalanced problems.In this paper,TWSVM is introduced into aircraft engine gas path fault diagnosis.The generalization capacity of Gauss kernel function usually used in TWSVM is relatively weak.So a mixed kernel function is used to improve performance to ensure that the TWSVM algorithm can better balance a strong generalization ability and a good learning ability.Experimental results prove that the cross validation training accuracy of TWSVM using the mixed kernel function averagely increases 2%.Grid search is usually applied in parameter optimization of TWSVM,but it heavily depends on experience.Therefore,the hybrid particle swarm algorithm is introduced.It can intelligently and rapidly find the global optimum.Experiments prove that its training accuracy is better than that of the classical particle swarm algorithm by 5%.     

一种大尺寸复合材料筒状支架成型技术北大核心CSCD

主要从模具设计、铺层工艺优化、成型压力保证等方面阐述了一种大尺寸厚壁异型复合材料筒状支架的热压罐成型技术。实践表明:采用分块组合模具阴模成型,合理设计铺层时纤维的断开方式,固化时采用梯度循环加压,控制加压点温度、最大施加压力,可以有效地保证该异型厚壁支架各位置加压到位,成型产品表面光滑无褶皱,内部无超出标准的分层、疏松等缺陷,同时尺寸精度、含胶量也满足指标要求。     

降压熄火过程复合推进剂燃速的测试研究

激光光斑法是激光阴影技术的实际应用,它是文献[1]中激光燃速仪法的发展,但本质有很大差别。激光器发出的激光束照在燃烧的药条上,随药条燃烧,燃面下移逐渐增多的过激光量由一光电池接收并转换为电压信号。如果在激光束上加一整形片,使这种转换具线性关系,并且适当选择和调整放大和记录元件,使在要求的测试精度范围内,每个环节信号转换都具有线性关系。因而,组成一个线性系统。