基于光学测角数据的风云四号同步轨道卫星精密定轨

针对风云四号同步卫星的精密定轨和精度评估需求，首先利用地面光学测角数据对FY-4A卫星进行精密定轨，定轨后方位角和高度角的残差rms分别为0.25＂和0.45＂。与基于测距数据的轨道相比，位置精度在有测角数据的弧段内小于50m。进一步联合测角数据和测距数据对FY-4A卫星进行联合定轨，定轨后轨道重叠精度优于15m。利用联合定轨结果评估了基于测距数据的实时轨道产品精度，可以明显发现轨道精度随着测距数据的积累而逐步提高。     

An empirical solar radiation pressure model for satellites moving in the orbit-normal mode

We present a family of empirical solar radiation pressure (SRP) models suited for satellites orbiting the Earth in the orbit normal (ON) mode. The proposed ECOM-TB model describes the SRP accelerations in the so-called terminator coordinate system. The choice of the coordinate system and the SRP parametrization is based on theoretical assumptions and on simulation results with a QZS-1-like box-wing model, where the SRP accelerations acting on the solar panels and on the box are assessed separately. The new SRP model takes into account that in ON-mode the incident angle of the solar radiation on the solar panels is not constant like in the yaw-steering (YS) attitude mode. It depends on the elevation angle of the Sun above the satellite’s orbital plane. The resulting SRP vector acts, therefore, not only in the Sun-satellite direction, but has also a component normal to it. Both components are changing as a function of the incident angle. ECOM-TB has been used for precise orbit determination (POD) for QZS-1 and BeiDou2 (BDS2) satellites in medium (MEO) and inclined geosynchronous Earth orbits (IGSO) based on IGS MGEX data from 2014 and 2015. The resulting orbits have been validated with SLR, long-arc orbit fits, orbit misclosures, and by the satellite clock corrections based on the orbits. The validation results confirm that—compared to ECOM2—ECOM-TB significantly (factor 3–4) improves the POD of QZS-1 in ON-mode for orbits with different arc lengths (one, three, and five days). Moderate orbit improvements are achieved for BDS2 MEO satellites—especially if ECOM-TB is supported by pseudo-stochastic pulses (the model is then called ECOM-TBP). For BDS2 IGSOs, ECOM-TB with its 9 SRP parameters appears to be over-parameterized. For use with BDS2 IGSO spacecraft we therefore developed a minimized model version called ECOM-TBMP, which is based on the same axis decomposition as ECOM-TB, but has only 2 SRP parameters and is supported by pseudo-stochastic parameters, as well. This model shows a similar performance as ECOM-TB with short arcs, but an improved performance with (3-day) long-arcs. The new SRP models have been activated in CODE’s IGS MGEX solution in Summer 2018. Like the other ECOM models the ECOM-TB derivatives might be used together with an a priori model.     

高速开关阀控电液位置伺服系统自适应鲁棒控制

为研究高精度的液压缸位置跟踪控制问题，设计了高速开关阀和换向阀组合控制液压缸的结构方案，并通过实验分析了高速开关阀的静态流量特性。建立了液压缸的连续可微摩擦模型，利用粒子群优化算法对其参数进行辨识。建立了系统的非线性数学模型，基于非连续参数映射和反步法设计了直接自适应鲁棒控制器，通过参数在线自适应调节来更新估计值和鲁棒反馈项支配参数不确定性，实验结果表明:在跟踪幅值为5mm，频率为0.4Hz的正弦信号时，最后一个周期的最大跟踪误差、平均跟踪误差及其标准差分别为0.638、0.25mm和0.405mm，与传统PID控制器相比，控制精度显著提升，旨在为实现高精度的数字阀控位置伺服技术提供有价值的参考。      

椭圆轨道卫星对地全球覆盖电推进控制

针对椭圆轨道卫星近/远地点的星下点对全球或特定纬度区域的访问问题，提出一种连续小推力下的对地覆盖控制策略。首先，推导了自然摄动对卫星拱线变化的影响，并探讨了进行小推力覆盖控制的必要性。然后，针对燃料消耗的优化问题，将控制方程展开成含傅里叶级数的形式，用以获得便于星上计算的解析形式的次优解，同时探讨了截取阶数与优化程度的关系。在进行拱线控制的同时，通过合理设置约束，对椭圆轨道的近地点高度进行保护，确保卫星安全运行。仿真结果表明，提出的方法能够以适当的燃料消耗代价实现椭圆轨道的近/远地点的全球覆盖控制或特定纬度区域的反复推扫，且控制力在可接受的范围内。     

火星轨道交会自主导航与制导方法

对火星采样返回任务中的火星轨道交会自主导航和制导技术进行了研究。采用光学自主导航敏感器测量的火星中心方向和视半径，相对敏感器测量的相对位置等观测量，设计了导航滤波器同时估计轨返组合体和上升器的轨道。在导航滤波器设计中，针对光学自主导航敏感器更新频率远低于滤波解算频率的问题，设计了一种连续观测量构造算法，确保每个滤波周期均可进行测量更新，以提高导航精度。基于导航滤波器估计结果，采用T-H制导设计了4脉冲共椭圆交会策略实施轨道控制，从而构成近程交会自主导航和制导方案用于完成火星轨道交会任务。通过数学仿真校验了所提出方法的有效性。     

同步双小行星系统共振轨道设计

研究了同步双小行星系统中共振轨道的设计方法及演化规律。首先，基于双椭球模型建立探测器运动方程，并给出共振轨道初值选取方法。然后，利用改进并行打靶法，提出一种双小行星系统平面共振轨道两步修正方法。同时结合稳定性理论及分岔理论，给出双小行星系统三维共振轨道生成和延拓方法；最后，以双小行星系统1999KW4为例，设计了共振比为1∶1,1∶2,1∶3,1∶4,2∶3的平面和空间共振轨道族，并分析了共振轨道的特性及轨道周期和轨道能量的变化规律。给出的双小行星系统中共振轨道的设计方法具有普适性，对未来双小行星系统探测任务中的轨道设计具有一定的参考意义与借鉴价值。     

基于工厂模式的OSLC数据集成接口设计与实现

复杂软件系统往往由不同地域的研发团队采用不同的开发工具来协同完成，研发过程中存在数据难以集成的问题.基于开放式生命周期协作服务(OSLC)规范来设计软件协同开发数据接口，有利于提高软件协同开发的效率.首次结合工厂模式和OSLC规范设计并实现数据集成接口，将不同工具的数据集成抽象成统一的公共接口，从而采用统一的数据接口和规范实现不同工具的数据集成，有利于优化软件系统体系结构.以符合OSLC规范的Bugzilla缺陷管理系统和Jenkins持续集成工具的集成为例，以面向航天软件系统研发的SunwiseAEM一体化研发管理平台为载体，基于工厂模式设计并实现了符合OSLC规范的数据集成系统，实现了不同工具间的数据集成，提供了一种通用的、可扩展的数据集成方式.     

部署retro-GEO巡视器的月球借力飞行轨道分析

retro-GEO是指逆行（retrograde）地球静止轨道（geostationary Earth orbit, GEO），该轨道与GEO轨道高度相同或相近，但倾角为180°，安装在retro-GEO卫星上的巡视器可每12h对GEO带空间资产附近碎片环境安全预警。直接西向发射retro-GEO卫星存在地面测控和发射能耗较大的困难。基于平面四体模型，为降低设计变量敏感性，以近月点参数为设计变量，建立了部署retro-GEO巡视器的月球借力飞行轨道设计模型，利用轨道动力学模型延拓策略，得到该类轨道绕月后返回地球飞行时长只能约为114.79h，该结论可用于求解该类轨道高精度轨道动力学模型解。     

A novel architecture of electro-hydrostatic actuator with digital distribution

To address the flow imbalance rapidly of the asymmetric Electro-Hydrostatic Actuator (EHA), this paper presents a novel architecture of asymmetric EHA with the Digital Distribution (EHA-DD). It also improves the flow nonlinearity and control accuracy of the pump, especially in the low-speed condition. The digital distribution with two High-Speed on–off Valves (HSVs) not only balances flow instead of the check valves, but also replaces the pump at the low-speed to control output flow by adjusting the PWM signal. The pump and HSVs are the crucial components to control flow output. Firstly, the flow calculation models of the pump and the duty ratio inversed model of the HSV are obtained through experimental tests and the identification method. To get the control input signal for the required flow, the pump speed and PWM duty ratio for the HSVs are inversed to compensate for flow output. Further, a multimode digital flow distribution control method based on pump speed, mainly including the pump-controlled mode for large flow demand and valve-controlled mode for little flow demand, is proposed to control the accurate flow output actively. The step extension experiments based on the flow calculation models are conducted on the EHA-DD prototype under elastic, opposite varying load. The results demonstrate that the EHA-DD realizes little position error by accurate flow control, and it is also beneficial to improve the service life of the pump.     

轨控大干扰下的系统角动量管理

摘要： 针对利用角动量交换装置系统实现轨控期间姿态维持的情况，研究当轨控推力器存在大力矩扰动时系统角动量管理方法.结合对地运行航天器轨道运动特性，分析轨控干扰力矩的积累角动量变化规律；考虑角动量管理装置系统的角动量存贮容量，基于角动量积累规律提出了一种结合偏置角动量建立与对称分布轨控位置选择的系统角动量管理方法，实现了对称轨控位置积累角动量互相抵消的自平衡效果，极大程度地提高轨控效率且避免系统角动量饱和现象.所提出的方法适用于喷气欠驱动控制系统，方法的有效性通过了数学仿真验证及在轨型号应用.