不同直径圆球诱导燃烧的振荡机制与频率特性

为了分析不同直径圆球诱导振荡燃烧的规律，并揭示圆球大小在振荡燃烧现象中所发挥的深层次作用，本文采用二维轴对称Euler方程和基元反应模型，对不同直径的圆球在H2/air预混气体中诱导振荡燃烧的现象开展数值模拟研究。研究发现，振荡频率并不是简单地随直径增大而逐渐从高频向低频连续过渡，而是存在两次突变，形成了超高频、高频以及低频三种振荡燃烧模态。在两种模态间过渡时，振荡达到稳定状态前，会存在一段双频耦合的振荡阶段。三种不同振荡燃烧模态的产生是受到了不同振荡机制的作用，而两种模态间过渡时的双频耦合现象则是两种机制相互竞争的结果。     

相位检测误差对核磁共振陀螺输出频率的影响

针对核磁共振陀螺中采用相位检测方案时可能引起额外频率误差的问题,提出了通过控制电子顺磁共振失谐量及静磁场扰动来抑制额外频率误差的方案。基于Bloch方程,推导了惰性气体原子系综输出频率的表达式,并将相位检测的过程包含在内。建立了考虑相位检测误差的核磁共振陀螺频率误差方程,给出了相位检测引入的额外频率误差表达式并进行了数值仿真。仿真结果表明,通过设定合适的共振失谐量,其额外频率误差至少可以抑制1个数量级,而通过精确地抑制静磁场的一阶及二阶扰动,可以进一步抑制1～3个数量级,将额外频率误差降低到nHz量级。     

Using TensorFlow-based Neural Network to estimate GNSS single frequency ionospheric delay (IONONet)

In the last 20?years, and in particular in the last decade, the availability of propagation data for GNSS has increased substantially. In this sense, the ionosphere has been sounded with a large number of receivers that provide an enormous amount of ionospheric data. Moreover, the maturity of the models has also been increased in the same period of time. As an example, IGS has ionospheric maps from GNSS data back to 1998, which would allow for the correlation of these data with other quantities relevant for the user and space weather (such as Solar Flux and Kp). These large datasets would account for almost half a billion points to be analyzed. With the advent and explosion of Big Data algorithms to analyze large databases and find correlations with different kinds of data, and the availability of open source code libraries (for example, the TensorFlow libraries from Google that are used in this paper), the possibility of merging these two worlds has been widely opened. In this paper, a proof of concept for a single frequency correction algorithm based in GNSS GIM vTEC and Fully Connected Neural Networks is provided. Different Neural Network architectures have been tested, including shallow (one hidden layer) and deep (up to five hidden layers) Neural Network models. The error in training data of such models ranges from 50% to 1% depending on the architecture used. Moreover, it is shown that by adjusting a Neural Network with data from 2005 to 2009 but tested with data from 2016 to 2017, Neural Network models could be suitable for the forecast of vTEC for single frequency users. The results indicate that this kind of model can be used in combination with the Galileo Signal-in-Space (SiS) NeQuick G parameters. This combination provides a broadcast model with equivalent performances to NeQuick G and better than GPS ICA for the years 2016 and 2017, showing a 3D position Root Mean Squared (RMS) error of approximately 2?m.     

利用微波探测仪(ATMS)对在轨微波辐射计观测精度的模拟分析

微波辐射计的观测精度及其对数值模式同化应用的影响评估是微波辐射计观测指标设计的重要参考。基于微波探测仪(ATMS)资料,利用三维变分同化系统模拟分析在轨微波辐射计的观测精度指标。针对ATMS观测误差特征,在其观测基础上增加均值为零、标准偏差分别为0.5,1.0,1.5,2.0K的正态随机扰动,进而获得不同精度的观测模拟值序列,然后利用Harris和Kelley的辐射资料偏差订正经验方法订正不同精度的观测资料。偏差订正后,利用三维变分同化模式(WRFDA)直接同化ATMS资料。通过2016年6月6h预报场的同化试验,评估了不同观测精度的模拟资料对数值模式的同化影响。     

SMOS与Aquarius卫星海表盐度测量方法及数据的对比分析

国际上发射的海表盐度遥感卫星主要有2颗:欧洲的SMOS和美国的Aquarius卫星,为给后续海表盐度遥感提供参考借鉴,对比分析了这2颗卫星的遥感器载荷、数据处理算法和盐度数据。遥感器载荷方面,SMOS采用L波段二维综合孔径辐射计,而Aquarius采用L波段实孔径辐射计加散射计;数据处理算法方面,分析了二者在介电常数模型、海面粗糙度校正以及反演算法方面的差异;盐度数据方面,分析了SMOS与Aquarius盐度数据之间的相关程度,并分别与ISAS(In Situ Analysis System)浮标盐度数据作对比,分析了2颗卫星的盐度数据精度。将2颗卫星的盐度遥感数据与ISAS浮标盐度数据对比发现,在全球范围内,Aquarius盐度测量精度优于SMOS;但在开阔海域,SMOS盐度测量精度优于Aquarius;而在近海岸区域,均出现较大的误差,且SMOS数据误差更大。     

超宽带变频系统中的本振产生技术研究

本振源是超宽带变频系统中的核心部件，本文以超宽带上变频系统为例，介绍变频系统中本振信号的产生技术。本文所设计的超宽带变频系统，经过三次上变频，可将(0.8~2.8)GHz 的低频信号变换至（0.5~40）GHz。变频过程中需要一系列点频本振和一组宽带本振，基于PLL+DFS 的方法产生点频本振，基于DDS+DFS 的方式产生宽带本振。     

Early analysis of precise orbit and clock offset determination for the satellites of the global BeiDou-3 system

Eight new-generation BeiDou satellites (BeiDou-3) have been launched into Medium Earth Orbit (MEO), allowing for global coverage since March 2018, and they are equipped with new hydrogen atomic clocks and updated rubidium clocks. Firstly, we analyzed the signals for the carrier-to-noise-density ratio (C/N0) and pseudorange multipath (MP) by using international GNSS (Global Navigation Satellite System) Monitoring and Assessment System (iGMAS) station data, and found that B1C has a lower C/N0, and B2a has the same level of C/N0 as the B1I and B3I signals. For pseudorange multipath, compared with the BeiDou-2 satellites, the obvious systematic variation of MP scatters related to the elevation angle is greatly improved for the BeiDou-3 and BeiDou-3e satellites signals. For the signals of the BeiDou-3 satellites, the order of the Root Mean Square (RMS) values of multipath and noise is B3I?<?B1I?<?B2a?<?B1C. Then, the comparison of the precise orbit determination and clock offset determination for the BeiDou-2, BeiDou-3, and BeiDou-3 experimental (BeiDou-3e) satellites was done by using 10 stations from iGMAS. The 3D precision of the 24?h orbit overlap is 24.55, 25.61, and 23.35?cm for the BeiDou-3, BeiDou-3e, and BeiDou-2 satellites, respectively. BeiDou-3 satellite has a comparable precision to that of the BeiDou-2 satellite. For the precision of clock offset estimation, the Standard Deviation (STD) of the BeiDou-3 MEO satellite is 0.350?ns, which is an improvement of 0.042?ns over that of the BeiDou-2 MEO satellite. The stabilities of the BeiDou-3 and BeiDou-3e onboard clocks are better than those of BeiDou-2 by factors of 2.84 and 1.61 at an averaging time of 1000 and 10,000?s, respectively.     

Determination of optimal samples for robot calibration based on error similarity

Industrial robots are used for automatic drilling and riveting.The absolute position accuracy of an industrial robot is one of the key performance indexes in aircraft assembly,and can be improved through error compensation to meet aircraft assembly requirements.The achievable accuracy and the difficulty of accuracy compensation implementation are closely related to the choice of sampling points.Therefore,based on the error similarity error compensation method,a method for choosing sampling points on a uniform grid is proposed.A simulation is conducted to analyze the influence of the sample point locations on error compensation.In addition,the grid steps of the sampling points are optimized using a statistical analysis method.The method is used to generate grids and optimize the grid steps of a Kuka KR-210 robot.The experimental results show that the method for planning sampling data can be used to effectively optimize the sampling grid.After error compensation,the position accuracy of the robot meets the position accuracy requirements.     

介质材料对频率选择表面传输特性的影响

通过理论计算和实验验证分析了介质材料对频率选择表面传输特性的影响规律,讨论了蒙皮的厚度、介电常数,芯层厚度、介电常数四个因素对FSS的通带位置、宽度、损耗的影响。结果表明,蒙皮和芯层厚度增厚会使通带位置向低频移动,厚度减小通带位置向高频移动;蒙皮和芯层介电增大会使通带位置向低频移动,介电减小通带位置向高频移动。并测试了同样结构的FSS平板传输特性,理论分析和实验结果一致性较好。     

基于火箭橇的北斗动态定位精度鉴定方法

介绍了几种现有的以GPS/北斗为主要代表的卫星导航系统的动态定位精度 鉴定方法,分析了这几种方法在模拟实际使用环境、鉴定精度等方面的优缺点,提出了 一种基于火箭橇试验平台的北斗导航定位系统动态定位精度鉴定方法。该方法能够很好 地模拟北斗导航定位系统实际工作环境（速度、加速度、振动和天线角度等）,解决高 动态、高精度北斗导航定位系统动态定位精度鉴定问题,并对该方法的原理和实施方法 作了详细的论述,最后分析了该方法的不确定度及误差,并提出了改进措施。