考虑输入饱和与姿态角速度受限的航天器姿态抗退绕控制

 针对航天器姿态控制过程中同时存在输入饱和与姿态角速度受限的问题,提出了一种新型的姿态控制设计方法。该方法在保证系统渐近稳定的前提下,能够显式地给出输入力矩和姿态角速度的最大幅值,并通过引入一个时变锐度参数来增强系统对外部干扰的抑制能力;在此基础上,进一步考虑了由于四元数的冗余性所导致的退绕问题,设计了一组新的姿态偏差函数和偏差向量,使得控制器在满足上述约束的同时还具有抗退绕的优点。仿真结果表明,所提算法能够同时满足输入饱和与姿态角速度受限的约束,并且在较大外部干扰的情况下表现出了很强的鲁棒性,同时成功地规避了退绕现象。该算法为存在多重约束的航天器姿态控制问题提供了一个新的思路和解决方案,具有很好的实际应用价值。     

Novel finite-time attitude control of postcapture spacecraft with input faults and quantization

This paper investigates a novel finite-time attitude control method for the postcapture spacecraft with an unknown captured space target in the presence of input faults and quantization. First, a quasi fixed-time convergent performance function is developed to quantitatively characterize the attitude tracking performance. Then, a backstepping prescribed performance attitude controller is devised via using integral barrier Lyapunov function. Compared with the existing works, the fractional state feedback and discontinuous controller is directly avoided to achieve the fixed-time convergence rate. Namely, the proposed fixed-time controller is easily achieved online. Finally, two groups of illustrative examples are organized to validate the effectiveness and robustness of the proposed control method.     

四旋翼飞行器姿态控制建模与仿真

四旋翼飞行器是典型的欠驱动、非线性、强耦合系统。其姿态控制精度和抗干扰问题一直是研究热点之一。为了实现小型低成本四旋翼飞行器姿态准确控制,详细分析了四旋翼飞行器受力情况,利用牛顿-欧拉方程建立了四旋翼飞行器非线性动力学模型,针对四旋翼飞行器在实际飞行过程中经常会遇到阵风、气流等不确定外界干扰,设计了基于小扰动的PID控制器,并通过对俯仰通道、横滚通道、偏航通道MATLAB/Simulink仿真模型进行仿真测试和结果分析。结果表明:所设计控制算法能够满足四旋翼飞行器姿态控制要求,并具有较好的抗干扰性能。     

基于双力源的叠加式多维力传感器校准装置研究CSCD

介绍了一种基于叠加机原理的双力源多维力传感器校准装置的设计与研制,对装置的测量不确定度进行了分析,通过对三分量力传感器的校准实验,证明了校准装置不仅可以对多分量力传感器进行单分量校准,还能方便地实现耦合误差的校准。     

BLKF方法抑制MEMS惯性传感器随机噪声

针对微机电系统（MEMS）惯性传感器应用卡尔曼滤波（KF）处理数据时随机噪声难以估计的缺点，提出一种基于贝叶斯拉普拉斯卡尔曼滤波（BLKF）的随机噪声更新方法。该方法利用拉普拉斯近似算法，将贝叶斯边缘分布近似表示，能够避免贝叶斯方法更新过程中由于数据维数较大造成后验边缘分布较难估计的情况，提高对随机噪声的更新效率和精度。通过陀螺仪转台实验采集实验数据，运用KF与BLKF分别滤波。对比滤波结果可发现，BLKF比KF能更好地反映真实角速度状态。同时，在陀螺仪角速度变化时，BLKF的可靠性和准确性更高，滤波效果更具优势，能够达到抑制MEMS惯性传感器随机噪声的目的。     

微小卫星低可观测外形飞行姿态规划

为提高在轨微小卫星的使用效能及生存能力,提出一种微小卫星低可观测外形飞行姿态规划算法.根据微小卫星雷达散射截面(RCS)、轨道及雷达威胁特性,建立了可进行长时间内最佳飞行姿态规划的数学模型,设计了低计算复杂度的链表式个体结构及进化规划策略,并实现了算法对高威胁区优化规划的能力.同时,算法低迭代步长下的快速收敛特性以及进...     

基于势函数法的航天器自主姿态机动控制

主要研究存在禁止姿态的航天器自主姿态机动控制问题.首先,给出航天器的动力学和运动学模型,利用四元数描述航天器与机动姿态和禁止姿态的姿态偏差,用相应的欧拉转角描述不同姿态间的距离.为利用势函数完成禁止姿态回避,结合航天器的运动情况设计排斥势函数(RPF)存在条件后,根据禁止姿态最小允许夹角构造一种新的排斥势函数.接着,利...     

Robust Hybrid Control for Ballistic Missile Longitudinal Autopilot

This paper investigates the boost phase’s longitudinal autopilot of a ballistic missile equipped with thrust vector control. The existing longitudinal autopilot employs time-invariant passive resistor-inductor-capacitor (RLC) network compensator as a control strategy, which does not take into account the time-varying missile dynamics. This may cause the closed-loop system instability in the presence of large disturbance and dynamics uncertainty. Therefore, the existing controller should be redesigned to achieve more stable vehicle response. In this paper, based on gain-scheduling adaptive control strategy, two different types of optimal controllers are proposed. The first controller is gain-scheduled optimal tuning-proportional-integral-derivative (PID) with actuator constraints, which supplies better response but requires a priori knowledge of the system dynamics. Moreover, the controller has oscillatory response in the presence of dynamic uncertainty. Taking this into account, gain-scheduled optimal linear quadratic (LQ) in conjunction with optimal tuning-compensator offers the greatest scope for controller improvement in the presence of dynamic uncertainty and large disturbance. The latter controller is tested through various scenarios for the validated nonlinear dynamic flight model of the real ballistic missile system with autopilot exposed to external disturbances.     

CubeSail: A low cost CubeSat based solar sail demonstration mission

CubeSail is a nano-solar sail mission based on the 3U CubeSat standard, which is currently being designed and built at the Surrey Space Centre, University of Surrey. CubeSail will have a total mass of around 3 kg and will deploy a 5 × 5 m sail in low Earth orbit. The primary aim of the mission is to demonstrate the concept of solar sailing and end-of-life de-orbiting using the sail membrane as a drag-sail. The spacecraft will have a compact 3-axis stabilised attitude control system, which uses three magnetic torquers aligned with the spacecraft principle axis as well as a novel two-dimensional translation stage separating the spacecraft bus from the sail. CubeSail’s deployment mechanism consists of four novel booms and four-quadrant sail membranes. The proposed booms are made from tape-spring blades and will deploy the sail membrane from a 2U CubeSat standard structure. This paper presents a systems level overview of the CubeSat mission, focusing on the mission orbit and de-orbiting, in addition to the deployment, attitude control and the satellite bus.     

AHC-85航向姿态计算机中CSDB总线的应用分析

基于CSDB总线在AHC-85航向姿态计算机中的应用,阐述了CSDB总线的规范、电气特性和编码规则,并对AHC-85航向姿态计算机中CSDB总线的检测数据推算以及检测数据模拟做了详尽的分析。