基于惯性定位定向的高铁轨检仪分析研究

根据高铁轨道静态检测的测量需求,设计了一种利用定位定向技术的0级轨检仪,并详细阐述了其构成和工作原理,介绍了其特点。通过对比性分析论证,优选了一种测量精度高、操作方法简单且可大幅度提高测量效率的设计方案。理论仿真表明该系统测量精度能够达到优于1.3mm/km的水平。根据理论仿真结果搭建了原理简易验证设备,结合高铁测控网的测量基准,在一段高铁的弯道铁轨上进行了验证测试,测试结果表明采用定位定向技术的0级轨检仪具备实际工程化的潜力,以及提高测量效率和精度的能力。     

一种基于外推信息的惯导/陆基单站导航修正方案

提出了一种基于外推信息的陆基单站测距信息惯导修正方案,该方案一方面利用陆基测距系统融合捷联惯导系统（SINS）的导航信息进行惯导误差修正,充分发挥惯导系统和陆基导航系统各自的优点,进行系统间的取长补短,有效地减小导航误差;另一方面将陆基/SINS修正结果送入状态估计器求解法向速度,解算实时载体轨迹的待修正量,进而执行载体速度和方向修正,进一步提高了导弹命中精度。     

Time synchronization of new-generation BDS satellites using inter-satellite link measurements

Autonomous satellite navigation is based on the ability of a Global Navigation Satellite System (GNSS), such as Beidou, to estimate orbits and clock parameters onboard satellites using Inter-Satellite Link (ISL) measurements instead of tracking data from a ground monitoring network. This paper focuses on the time synchronization of new-generation Beidou Navigation Satellite System (BDS) satellites equipped with an ISL payload. Two modes of Ka-band ISL measurements, Time Division Multiple Access (TDMA) mode and the continuous link mode, were used onboard these BDS satellites. Using a mathematical formulation for each measurement mode along with a derivation of the satellite clock offsets, geometric ranges from the dual one-way measurements were introduced. Then, pseudoranges and clock offsets were evaluated for the new-generation BDS satellites. The evaluation shows that the ranging accuracies of TDMA ISL and the continuous link are approximately 4?cm and 1?cm (root mean square, RMS), respectively. Both lead to ISL clock offset residuals of less than 0.3?ns (RMS). For further validation, time synchronization between these satellites to a ground control station keeping the systematic time in BDT was conducted using L-band Two-way Satellite Time Frequency Transfer (TWSTFT). System errors in the ISL measurements were calibrated by comparing the derived clock offsets with the TWSTFT. The standard deviations of the estimated ISL system errors are less than 0.3?ns, and the calibrated ISL clock parameters are consistent with that of the L-band TWSTFT. For the regional BDS network, the addition of ISL measurements for medium orbit (MEO) BDS satellites increased the clock tracking coverage by more than 40% for each orbital revolution. As a result, the clock predicting error for the satellite M1S was improved from 3.59 to 0.86?ns (RMS), and the predicting error of the satellite M2S was improved from 1.94 to 0.57?ns (RMS), which is a significant improvement by a factor of 3–4.     

基于射频的导航卫星星间链路信息传输与仿真研究

星间链路是导航卫星实现精密定轨和自主导航的关键技术之一。导航卫星通过星间链路完成伪距测量和数据交换,维持系统稳定运行的时空基准,保证系统持续提供精准导航服务。根据全球导航卫星系统的建设情况和发展趋势,首先介绍星间观测和信息传输频段,并从天线特征、多址控制方式和网络拓扑结构等角度分析了射频链路的工作体制。最后,针对实际导航卫星星座,应用OPNET平台建立导航信息传输仿真模型,通过分析信息传输效率,验证了基于射频链路导航信息传输的可行性和有效性,对全球导航卫星系统的星间链路研究具有一定的参考价值。     

GPS/BDS/INS tightly coupled integration accuracy improvement using an improved adaptive interacting multiple model with classified measurement update

An Extended Kalman Filter (EKF) is commonly used to fuse raw Global Navigation Satellite System (GNSS) measurements and Inertial Navigation System (INS) derived measurements. However, the Conventional EKF (CEKF) suffers the problem for which the uncertainty of the statistical properties to dynamic and measurement models will degrade the performance. In this research, an Adaptive Interacting Multiple Model (AIMM) filter is developed to enhance performance. The soft-switching property of Interacting Multiple Model (IMM) algorithm allows the adaptation between two levels of process noise, namely lower and upper bounds of the process noise. In particular, the Sage adaptive filtering is applied to adapt the measurement covariance on line. In addition, a classified measurement update strategy is utilized, which updates the pseudorange and Doppler observations sequentially. A field experiment was conducted to validate the proposed algorithm, the pseudorange and Doppler observations from Global Positioning System (GPS) and BeiDou Navigation Satellite System (BDS) were post-processed in differential mode. The results indicate that decimeter-level positioning accuracy is achievable with AIMM for GPS/INS and GPS/BDS/INS configurations, and the position accuracy is improved by 35.8%, 34.3% and 33.9% for north, east and height components, respectively, compared to the CEKF counterpart for GPS/BDS/INS. Degraded performance for BDS/INS is obtained due to the lower precision of BDS pseudorange observations.     

高职院校教育信息化建设存在的问题及对策

教育信息化已成为深化高等教育教学改革,提高人才培养质量,建立办事高效、运转协调、行为规范的教育管理体制的重要手段.通过对推进高职院校信息化建设的相关问题进行了探讨,并提出了构建机制、加强资源建设和利用、重视信息化人才培养等建议和对策.     

An intelligentized and fast calibration method of SINS on moving base for planed missiles

In order to minish the error of inertial sensors, the technology of neural networks is attempted to on-line calibration of a slave inertial navigation system mounted on planed missiles. Based on the time-varied specialty of slave inertial navigation system on a moving base, an input–output sample structure method is proposed, and to automatically calibrate and revise the error of inertial sensors of inertial navigation system. When a missile is appended under the wing and in free-flight, in order to solve the inconsistent problem of measurement's character of the inertial sensors, the error angles between the master inertial navigation system and the slave inertial navigation system are estimated in advance, then, the input samples of a neural network can correctly simulate the free-flight state. Furthermore, in order to make a learning algorithm of neural networks can satisfy real-time calibrating on a moving base, the traditional Newton algorithm is improved by using first differential coefficient to replace the approximate matrix of second differential coefficients. As a result, the training speed and precision of neural network are enhanced. The simulation results indicate that the method and algorithm are feasible.     

DGPS/IMU integration-based geolocation system: Airborne experimental test results

This paper addresses differential global positioning system (DGPS)/inertial measurement unit (IMU) integration-based geolocation system developed for airborne remote sensing cameras. First, we provide a brief review on sensor calibration, alignment and sensor fusion as background material of this research. After presenting those background material, as a main part of this paper we present a geolocation algorithm designed for an airborne imaging system. The geolocation system developed is tested through actual airborne experiments. For the verification of the geolocation system developed, we compare initial stationary states of the airplane before-taking off with states after-landing. From the actual test results, we find that it is critical to do an accurate time synchronization between IMU, DGPS, and airborne images, and to compensate for the data delay occurred during the network transfer.     

甲板变形测量技术研究

当舰上的主导航系统与载机子惯导之间进行传递对准时,船体的变形会引起对准误差。想消除船体变形的影响从理论上讲,挠曲变形可以通过卡尔曼滤波进行估计,但在实际上很难建立足够精确的模型。通过船体变形的测量与校正技术,在大型载舰存在复杂动态变化的情况下,可采用分布式姿态基准,在载舰上的不同部位安装有限套惯性测量单元（IMU）,与舰上主导航系统构建成一个惯导网络,为载机子惯导的传递对准提供更丰富、更准确的载舰状态信息,从而大大提高传递对准的精度的研究。     

利用GPS实现高轨卫星定位的抗远近效应算法

针对GPS应用于高轨卫星定位面临的远近效应问题, 提出利用正交相关的联合极大似然估计算法来对GPS信号进行二维搜索, 可以得到正确的码延时及多普勒估计. 极大似然估计算法首先利用滑行相关法对仿真信号中的强信号进行搜索, 得到强信号模型, 然后利用正交相关去掉强信号, 最终实现对弱信号的正确捕获. 本文对高轨卫星接收到的GPS信号进行了功率分析, 并建立了信号模型, 进行了算法仿真. 结果表明, 这种估计算法能够提高二维搜索性能, 有效解决远近效应问题.