北斗卫星导航系统实时定轨与钟差处理策略

目前鲜有对北斗卫星导航系统（BeiDouNavigationSatelliteSystem,BDS）实时精密定轨与钟差确定的研究,文章提出了BDS实时轨道与实时钟差处理策略,包括了观测与动力学模型、实时轨道与实时钟差处理流程与评估方法。尤其对于实时钟差,为了提高计算效率,联合使用两个独立并行的线程估计非差绝对钟差和历元间相对钟差。利用多模全球卫星导航系统试验(MGEX)与全球连续检测评估系统（iGMAS）实测数据进行了北斗实时轨道与钟差解算,BDS实时轨道径向平均精度对于GEO卫星优于20cm,对于IGSO与MEO一般优于10cm;钟差精度对于GEO卫星为0.5~4.5ns,对于IGSO／MEO为0.2~2.0ns。基于目前的轨道与钟差结果,实时精密单点定位（PrecisePointPositioning,PPP）结果可以达到分米量级。     

Early analysis of precise orbit and clock offset determination for the satellites of the global BeiDou-3 system

Eight new-generation BeiDou satellites (BeiDou-3) have been launched into Medium Earth Orbit (MEO), allowing for global coverage since March 2018, and they are equipped with new hydrogen atomic clocks and updated rubidium clocks. Firstly, we analyzed the signals for the carrier-to-noise-density ratio (C/N0) and pseudorange multipath (MP) by using international GNSS (Global Navigation Satellite System) Monitoring and Assessment System (iGMAS) station data, and found that B1C has a lower C/N0, and B2a has the same level of C/N0 as the B1I and B3I signals. For pseudorange multipath, compared with the BeiDou-2 satellites, the obvious systematic variation of MP scatters related to the elevation angle is greatly improved for the BeiDou-3 and BeiDou-3e satellites signals. For the signals of the BeiDou-3 satellites, the order of the Root Mean Square (RMS) values of multipath and noise is B3I?<?B1I?<?B2a?<?B1C. Then, the comparison of the precise orbit determination and clock offset determination for the BeiDou-2, BeiDou-3, and BeiDou-3 experimental (BeiDou-3e) satellites was done by using 10 stations from iGMAS. The 3D precision of the 24?h orbit overlap is 24.55, 25.61, and 23.35?cm for the BeiDou-3, BeiDou-3e, and BeiDou-2 satellites, respectively. BeiDou-3 satellite has a comparable precision to that of the BeiDou-2 satellite. For the precision of clock offset estimation, the Standard Deviation (STD) of the BeiDou-3 MEO satellite is 0.350?ns, which is an improvement of 0.042?ns over that of the BeiDou-2 MEO satellite. The stabilities of the BeiDou-3 and BeiDou-3e onboard clocks are better than those of BeiDou-2 by factors of 2.84 and 1.61 at an averaging time of 1000 and 10,000?s, respectively.     

北斗首颗备份卫星性能初步分析

主要从卫星钟差预报、轨道测定精度、伪距波动情况等角度分析了I6卫星与北斗卫星导航系统（BDS）其他现役倾斜地球同步轨道（IGSO）卫星的异同,并从位置精度因子（PDOP）和格网可用性评估了I6卫星入网对BDS的贡献。利用星地双向时频传递设备观测的星地钟差数据,评估了I6卫星星载原子钟的预报性能,结果表明,I6卫星发播的卫星钟参数外推5h预报误差的均方根误差（RMS）为232ns,外推1h预报误差的RMS为073ns,与现役IGSO卫星钟差预报水平相当;对多星联合精密定轨结果分析表明,与北斗现役I3卫星相比,姿态控制方式优化后的I6卫星在地影期间的轨道精度并未发生明显衰减,克服了现有北斗二号卫星在地影期间轨道精度下降,从而影响北斗服务的连续性、可用性问题;利用大口径抛物面天线采集到的数据对I6卫星的伪距波动进行了分析,结果表明I6卫星单个观测弧段内其伪距波动峰峰差约为1m,与其他IGSO卫星一致;进行PDOP仿真计算,结果表明I6卫星的加入使得喀什地区的PDOP最大值由1282下降为726,PDOP大于6的时段所占百分比由2911%下降为1721%;对格网电离层产品实施解算,结果表明I6卫星的加入使得6个电离层格网点的可用度提升至95%以上。     

Analysis of BDS-3 distributed autonomous navigation based on BeiDou system simulation platform

Satellite autonomous navigation is an important function of the BeiDou-3 navigation System (BDS-3). Satellite autonomous navigation means that the navigation satellite uses long-term forecast ephemeris and Inter-Satellite Link (ISL) measurements to determinate its own spatial position and time reference without the support of the ground Operation and Control System (OCS) for a long time to ensure that the navigation system can normally maintain the time and space reference. This paper aims to analyze the feasibility of distributed autonomous navigation algorithms. For the first time, a ground parallel autonomous navigation test system (GPANTS) is built. The performance of distributed autonomous navigation is then analyzed using the two-way ISL ranging of BDS-3 satellites. First, the BDS simulation platform and the GPANTS are introduced. Then, the basic principles of distributed satellite autonomous orbit determination and time synchronization based on ISL measurements are summarized. Preliminary evaluation of the performance of the BDS-3 constellation autonomous navigation service under ideal conditions through simulation data. Then the performance of autonomous navigation for 22 BeiDou-3 satellites using ISL measurements is evaluated. The results show that when satellites operate autonomously for 50 days without the support of any ground station, the User Range Error (URE) of autonomous orbit determination is better than 3 m, and the time synchronization accuracy is better than 4 ns.     

Multi-GNSS contributions to differential code biases determination and regional ionospheric modeling in China

Due to the limited number and uneven distribution globally of Beidou Satellite System (BDS) stations, the contributions of BDS to global ionosphere modeling is still not significant. In order to give a more realistic evaluation of the ability for BDS in ionosphere monitoring and multi-GNSS contributions to the performance of Differential Code Biases (DCBs) determination and ionosphere modeling, we select 22 stations from Crustal Movement Observation Network of China (CMONOC) to assess the result of regional ionospheric model and DCBs estimates over China where the visible satellites and monitoring stations for BDS are comparable to those of GPS/GLONASS. Note that all the 22 stations can track the dual- and triple-frequency GPS, GLONASS, and BDS observations. In this study, seven solutions, i.e., GPS-only (G), GLONASS-only (R), BDS-only (C), GPS + BDS (GC), GPS + GLONASS (GR), GLONASS + BDS (RC), GPS + GLONASS + BDS (GRC), are used to test the regional ionosphere modeling over the experimental area. Moreover, the performances of them using single-frequency precise point positioning (SF-PPP) method are presented. The experimental results indicate that BDS has the same ionospheric monitoring capability as GPS and GLONASS. Meanwhile, multi-GNSS observations can significantly improve the accuracy of the regional ionospheric models compared with that of GPS-only or GLONASS-only or BDS-only, especially over the edge of the tested region which the accuracy of the model is improved by reducing the RMS of the maximum differences from 5–15 to 2–3 TECu. For satellite DCBs estimates of different systems, the accuracy of them can be improved significantly after combining different system observations, which is improved by reducing the STD of GPS satellite DCB from 0.243 to 0.213, 0.172, and 0.165 ns after adding R, C, and RC observations respectively, with an increment of about 12.3%, 29.4%, and 32.2%. The STD of GLONASS satellite DCB improved from 0.353 to 0.304, 0.271, and 0.243 ns after adding G, C, and GC observations, respectively. The STD of BDS satellite DCB reduced from 0.265 to 0.237, 0.237 and 0.229 ns with the addition of G, R and GR systems respectively, and increased by 10.6%, 10.4%, and 13.6%. From the experimental positioning result, it can be seen that the regional ionospheric models with multi-GNSS observations are better than that with a single satellite system model.     

Evaluation on real-time dynamic performance of BDS in PPP,RTK, and INS tightly aided modes

Since China’s BeiDou satellite navigation system (BDS) began to provide regional navigation service for Asia-Pacific region after 2012, more new generation BDS satellites have been launched to further expand BDS’s coverage to be global. In this contribution, precise positioning models based on BDS and the corresponding mathematical algorithms are presented in detail. Then, an evaluation on BDS’s real-time dynamic positioning and navigation performance is presented in Precise Point Positioning (PPP), Real-time Kinematic (RTK), Inertial Navigation System (INS) tightly aided PPP and RTK modes by processing a set of land-borne vehicle experiment data. Results indicate that BDS positioning Root Mean Square (RMS) in north, east, and vertical components are 2.0, 2.7, and 7.6?cm in RTK mode and 7.8, 14.7, and 24.8?cm in PPP mode, which are close to GPS positioning accuracy. Meanwhile, with the help of INS, about 38.8%, 67.5%, and 66.5% improvements can be obtained by using PPP/INS tight-integration mode. Such enhancements in RTK/INS tight-integration mode are 14.1%, 34.0%, and 41.9%. Moreover, the accuracy of velocimetry and attitude determination can be improved to be better than 1?cm/s and 0.1°, respectively. Besides, the continuity and reliability of BDS in both PPP and RTK modes can also be ameliorated significantly by INS during satellite signal missing periods.     

LEO enhanced Global Navigation Satellite System (LeGNSS) for real-time precise positioning services

Global Navigation Satellite System (GNSS) has been widely used in many geosciences areas with its Positioning, Navigation and Timing (PNT) service. However, GNSS still has its own bottleneck, such as the long initialization period of Precise Point Positioning (PPP) without dense reference network. Recently, the concept of PNTRC (Positioning, Navigation, Timing, Remote sensing and Communication) has been put forward, where Low Earth Orbit (LEO) satellite constellations are recruited to fulfill diverse missions. In navigation aspect, a number of selected LEO satellites can be equipped with a transmitter to transmit similar navigation signals to ground users, so that they can serve as GNSS satellites but with much faster geometric change to enhance GNSS capability, which is named as LEO constellation enhanced GNSS (LeGNSS). As a result, the initialization time of PPP is expected to be shortened to the level of a few minutes or even seconds depending on the number of the LEO satellites involved. In this article, we simulate all the relevant data from June 8th to 14th, 2014 and investigate the feasibility of LeGNSS with the concentration on the key issues in the whole data processing for providing real-time PPP service based on a system configuration with fourteen satellites of BeiDou Navigation Satellite System (BDS), twenty-four satellites of the Global Positioning System (GPS), and sixty-six satellites of the Iridium satellite constellations. At the server-end, Precise Orbit Determination (POD) and Precise Clock Estimation (PCE) with various operational modes are investigated using simulated observations. It is found out that GNSS POD with partial LEO satellites is the most practical mode of LeGNSS operation. At the user-end, the Geometry Dilution Of Precision (GDOP) and Signal-In-Space Ranging Error (SISRE) are calculated and assessed for different positioning schemes in order to demonstrate the performance of LeGNSS. Centimeter level SISRE can be achieved for LeGNSS.     

Monitoring atomic clocks on board GNSS satellites

A method for monitoring atomic clocks on board Global Navigation Satellites System (GNSS) satellites is described to address the issue of clock related signal integrity in safety–critical applications of GNSS. The carrier-phase time transfer is employed in the clock monitoring method which enables tight tracking of the satellite onboard clocks and thus improves detectability of clock anomalies. Detecting onboard clock anomalies requires the ability to monitor clocks in real time, and a Kalman filter can then be utilized to estimate the phase offsets between the satellite clocks and ground clocks. This study, using the difference between the measured and predicted phase offset as a test statistic, sets a threshold for clock anomalies based on the prediction interval approach. Finally the validity of the monitoring method is examined by processing a set of real GNSS data that includes two recent incidents of clock anomalies in GNSS satellites.     

Switching and performance variations of on-orbit BDS satellite clocks

The information of the satellite clock switching and performance variations on-orbit of Chinese BeiDou-2 Navigation System (BDS) is not available for the public. In order to detect the BDS satellite clock switching and performances variation, we analyzed the precise clock offset products with a total duration of 5?years every BDS satellite equipped four atomic clocks from four different manufactures from January 2013 to October 2017. Three important contributions are concluded as follows. (1) It is found that the average time of on-orbit operation for BDS satellite clocks is about 1–2?years. There have been 22 times of clock switching for BDS satellites, of which the C05 and C08 satellites have been switched to the fourth (last) atomic clock. (2) There are frequent phase adjustments for BDS on-orbit satellite clocks, and the frequency series is relatively stable. Furthermore, there are semi-annual sinusoid cycles in the frequency drift series of C06 and C09 satellites. (3) The performances of MEO satellite clocks perform better than the IGSO and GEO satellite clocks. The average ten-thousand frequency stability of BDS satellite clocks is about 1E-13, which is worse than that of GPS and Galileo but better than that of GLONASS.     

Beidou wide-area augmentation system clock error correction and performance verification

On December 27, 2018, the Beidou-3 System (BDS-3) has completed the deployment of 18 Medium Earth Orbit (MEO) satellites combined as a space constellation. In addition to the augmentation information for the new system signals B1C and B2a, the BDS-3 is compatible with the three augmentation information broadcast by the BDS-2 system for B1I and B3I signals: equivalent clock error correction, User Differential Ranging Error (UDRE) and Grid Ionosphere Vertical Error (GIVE). In this paper, the observation data of Beidou monitoring network are used to analyze the pseudo-range observation quality of the smooth transition signals B1I and B3I of BDS-2 and BDS-3. At the same time, the relationship between the equivalent clock error correction and the prediction error of the satellite clock is analyzed by using the Two-Way Satellite Time and Frequency Transfer (TWSTFT) data. The results show that the correlation between the equivalent clock error correction and the monitored clock error by using the TWSTFT data is greater than 60%. We calculate the UDRE by using the equivalent clock error correction. The results show that the satellite equivalent clock error correction can improve the accuracy of User Equivalent Range Error (UERE) by about 50%. This paper also compares the positioning accuracy of the BDS-2 satellites with the BDS-2 satellites combined BDS-3 satellites. The results show that the three-dimensional positioning accuracy is improved by about 30% after the BDS-3 satellites are added.     

风云三号C星GNOS北斗掩星电离层探测初步结果

利用风云三号卫星C星GNOS掩星探测仪电离层数据,分析了2013年10月FY-3C GNOS探测的北斗掩星电离层廓线分布,将2013年10月1日至2015年10月10日期间FY-3C GNOS观测的F₂层峰值电子密度（N_mF₂）与地面电离层测高仪观测结果进行对比,验证了FY-3C GNOS北斗电离层掩星的探测精度.结果表明,FY3-C GNOS北斗电离层掩星与电离层测高仪探测的N_mF₂数据相关系数为0.96,平均偏差为10.21%,标准差为19.61%.在不同情况下其数据精度有如下特征:白天精度高于夜晚;夏季精度高于分季,分季精度高于冬季;中纬地区精度高于低纬地区,低纬地区精度高于高纬地区; BDS倾斜同步轨道（IGSO）卫星精度高于同步轨道（GEO）卫星和中轨道（MEO）卫星.FY-3C GNOS北斗电离层掩星与国际上其他掩星电离层数据精度的一致性对GNSS掩星探测资料的综合利用具有重大意义.      

Calibration errors in determining slant Total Electron Content (TEC) from multi-GNSS data

The global navigation satellite system (GNSS) is presently a powerful tool for sensing the Earth's ionosphere. For this purpose, the ionospheric measurements (IMs), which are by definition slant total electron content biased by satellite and receiver differential code biases (DCBs), need to be first extracted from GNSS data and then used as inputs for further ionospheric representations such as tomography. By using the customary phase-to-code leveling procedure, this research comparatively evaluates the calibration errors on experimental IMs obtained from three GNSS, namely the US Global Positioning System (GPS), the Chinese BeiDou Navigation Satellite System (BDS), and the European Galileo. On the basis of ten days of dual-frequency, triple-GNSS observations collected from eight co-located ground receivers that independently form short-baselines and zero-baselines, the IMs are determined for each receiver for all tracked satellites and then for each satellite differenced for each baseline to evaluate their calibration errors. As first derived from the short-baseline analysis, the effects of calibration errors on IMs range, in total electron content units, from 1.58 to 2.16, 0.70 to 1.87, and 1.13 to 1.56 for GPS, Galileo, and BDS, respectively. Additionally, for short-baseline experiment, it is shown that the code multipath effect accounts for their main budget. Sidereal periodicity is found in single-differenced (SD) IMs for GPS and BDS geostationary satellites, and the correlation of SD IMs over two consecutive days achieves the maximum value when the time tag is around 4?min. Moreover, as byproducts of zero-baseline analysis, daily between-receiver DCBs for GPS are subject to more significant intra-day variations than those for BDS and Galileo.     

Differential code bias estimation based on uncombined PPP with LEO onboard GPS observations

Differential Code Bias (DCB) is an essential correction that must be provided to the Global Navigation Satellite System (GNSS) users for precise position determination. With the continuous deployment of Low Earth Orbit (LEO) satellites, DCB estimation using observations from GNSS receivers onboard the LEO satellites is drawing increasing interests in order to meet the growing demands on high-quality DCB products from LEO-based applications, such as LEO-based GNSS signal augmentation and space weather research. Previous studies on LEO-based DCB estimation are usually using the geometry-free combination of GNSS observations, and it may suffer from significant leveling errors due to non-zero mean of multipath errors and short-term variations of receiver code and phase biases. In this study, we utilize the uncombined Precise Point Positioning (PPP) model for LEO DCB estimation. The models for uncombined PPP-based LEO DCB estimation are presented and GPS observations acquired from receivers onboard three identical Swarm satellites from February 1 to 28, 2019 are used for the validation. The results show that the average Root Mean Square errors (RMS) of the GPS satellite DCBs estimated with onboard data from each of the three Swarm satellites using the uncombined PPP model are less than 0.18 ns when compared to the GPS satellite DCBs obtained from IGS final daily Global Ionospheric Map (GIM) products. Meanwhile, the corresponding average RMS of GPS satellite DCBs estimated with the conventional geometry-free model are 0.290, 0.210, 0.281 ns, respectively, which are significantly larger than those obtained with the uncombined PPP model. It is also noted that the estimated GPS satellite DCBs by Swarm A and C satellites are highly correlated, likely attributed to their similar orbit type and space environment. On the other hand, the Swarm receiver DCBs estimated with uncombined PPP model, with Standard Deviation (STD) of 0.065, 0.037 and 0.071 ns, are more stable than those obtained from the official Swarm Level 2 products with corresponding STD values of 0.115, 0.101, and 0.109 ns, respectively. The above indicates that high-quality DCB products can be estimated based on uncombined PPP with LEO onboard observations.     

Near real-time BDS GEO satellite orbit determination and maneuver analysis with reversed point positioning

The Geostationary Earth Orbit (GEO) satellite is a crucial part of the BeiDou Navigation Satellite System (BDS) constellation. However, due to various perturbation forces acting on the GEO satellite, it drifts gradually over time. Thus, frequent orbit maneuvers are required to maintain the satellite at its designed position. During the orbit maneuver and recovery periods, the orbit quality of the maneuvered satellite computed with broadcast navigation ephemeris will be significantly degraded. Furthermore, the conventional dynamic Precise Orbit Determination (POD) approach may not work well, because of a lack of publicly available satellite information for modeling the thrust forces. In this paper, a near real-time approach free of thrust forces modeling is proposed for BDS GEO satellite orbit determination and maneuver analysis based on the Reversed Point Positioning (RPP). First, the station coordinates and receiver clock offsets are estimated by GPS/BDS combined Single Point Positioning (SPP) with single-frequency phase-smoothed pseudorange observations. Then, with the fixed station coordinates and receiver clock offsets, the RPP method can be conducted to determine the GEO satellite orbits. When no orbit maneuvers occur, the proposed method can obtain orbit accuracies of 0.92, 2.74, and 8.30?m in the radial, along-track, and cross-track directions, respectively. The average orbit-only Signal-In-Space Range Error (SISRE) is 1.23?m, which is slightly poorer than that of the broadcast navigation ephemeris. Using four days of GEO maneuvered datasets, it is further demonstrated that the derived orbits can be employed to characterize the behaviors of GEO satellite maneuvers, such as the time span of the maneuver as well as the satellite thrusting accelerations. These results prove the efficiency of the proposed method for near real-time GEO satellite orbit determination during maneuvers.     

Estimation of QZSS differential code biases using QZSS/GPS combined observations from MGEX

As an important error source in Global Navigation Satellite System (GNSS) positioning and ionospheric modeling, the differential code biases (DCB) need to be estimated accurately, e.g., the regional Quasi-Zenith satellite system (QZSS). In this paper, the DCB of QZSS is estimated by adopting the global ionospheric modeling method based on QZSS/GPS combined observations from Multi-GNSS experiment (MGEX). The performance of QZSS satellite and receiver DCB is analyzed with observations from day of year (DOY) 275–364, 2018. Good agreement between our estimated QZSS satellite DCB and the products from DLR and CAS is obtained. The bias and root mean square (RMS) of DCB are mostly within ±0.3 ns. The day-to-day fluctuation of the DCB time series is less than 0.5 ns with about 96% of the cases for all satellites. However, the receiver DCB is a little less stable than satellite DCB, and their standard deviations (STDs) are within 1.9 ns. The result shows that the stability of the receiver DCBs is not significantly related to the types of receiver or antenna.     

低轨卫星的北斗反射信号海洋覆盖分析

北斗系统作为我国自行研制的导航系统，具有独特的混合星座特性，其反射事件在海洋上的空间分布和覆盖性能的研究成果较少。针对上述问题，模拟了北斗三号（Beidou System 3，BDS3）以及全球定位系统（Global Positioning System，GPS）空间星座，模拟不同性能参数的低轨接收卫星，在此仿真系统的基础上，计算反射事件在各仿真场景下的海洋覆盖率以及同时发生反射事件的卫星数量。结果表明：BDS3与GPS相比具有更大的反射事件海洋覆盖率，覆盖性能更优；仿真周期7天与1天相比,前者卫星产生的反射事件海洋覆盖率约为后者5倍；低轨道卫星（Low Earth Orbit,LEO）轨道高度越高，天线波束角度越大，反射事件海洋覆盖率越大；3颗LEO卫星下同时发生反射事件卫星数的平均值约为单颗LEO卫星的3倍。可通过设计多星组网来提高反射事件海洋覆盖率。研究结果对星载反射技术海洋遥感应用方面有一定的参考价值。     

联合北斗导航与星间链路的大椭圆卫星定轨方法

传统的地面测控和GNSS均无法实现HEO卫星全弧段的跟踪观测.在分析北斗导航信号及其星间链路信号对典型HEO的观测几何及覆盖特性的基础上,利用北斗导航及其星间链路对HEO测控支持形成互补的特点,提出了一种卫星导航与星间链路相结合的自主导航方法.对HEO定轨进行分段划分并基于EKF设计了卫星导航与星间链路数据融合定轨的自主导航算法.分析结果表明,本文提出的方法能够从全弧段上改善HEO的观测几何,定轨精度比仅使用卫星导航提高了2个数量级,并且仅需较少的星间链路资源.      

北斗卫星共视增强罗兰-C授时应用

介绍用北斗卫星共视技术增强罗兰-C导航系统与国家授时中心协调世界时UTC（NTSC）的时间同步和授时服务能力这对罗兰-C与北斗卫星两大自主导航系统相互增强进行组合定位、导航、授时（PNT）应用和对系统保障及国家安全十分有益。     

The GLONASS-M satellite yaw-attitude model

The proper modeling of the satellites’ yaw-attitude is a prerequisite for high-precision Global Navigation Satellite System (GNSS) positioning and poses a particular challenge during periods when the satellite orbital planes are partially eclipsed. Whereas a lot of effort has been put in to examine the yaw-attitude control of GPS satellites that are in eclipsing orbits, hardly anything is known about the yaw-attitude behavior of eclipsing GLONASS-M satellites. However, systematic variations of the carrier phase observation residuals in the vicinity of the orbit’s noon and midnight points of up to ±27 cm indicate significant attitude-related modeling issues. In order to explore the GLONASS-M attitude laws during eclipse seasons, we have studied the evolution of the horizontal satellite antenna offset estimates during orbit noon and orbit midnight using a technique that we refer to as “reverse kinematic precise point positioning”. In this approach, we keep all relevant global geodetic parameters fixed and estimate the satellite clock and antenna phase center positions epoch-by-epoch using 30-second observation and clock data from a global multi-GNSS ground station network. The estimated horizontal antenna phase center offsets implicitly provide the spacecraft’s yaw-attitude. The insights gained from studying the yaw angle behavior have led to the development of the very first yaw-attitude model for eclipsing GLONASS-M satellites. The derived yaw-attitude model proves to be much better than the nominal yaw-attitude model commonly being used by today’s GLONASS-capable GNSS software packages as it reduces the observation residuals of eclipsing satellites down to the normal level of non-eclipsing satellites and thereby prevents a multitude of measurements from being incorrectly identified as outliers. It facilitates continuous satellite clock estimation during eclipse and improves in particular the results of kinematic precise point positioning of ground-based receivers.     

北斗系统UERE及定位精度评估

用户测距误差（URE）与用户设备误差（UEE）是影响定位精度的主要因素.民航是北斗系统的高端用户,监测其对民航机场的覆盖性和服务性能十分必要.本文根据华东、华南、华北、西北地区4个民航机场观测站的北斗实测数据,分析了各机场卫星的可见性.根据URE的解算方法、电离层修正模型、对流层修正模型以及定位精度的评估方法,给出了对应的性能评估结果.研究发现:可见星数均在6～14颗,满足定位要求; 95%置信度下,电离层延迟优于7.50m,对流层延迟优于13.28m,地球静止轨道卫星（GEO）、倾斜地球同步轨道卫星（IGSO）、中圆轨道卫星（MEO）卫星的URE值分别优于2.36m,1.72m,2.59m,满足北斗规范的要求;95%置信度下,定位精度水平方向优于3.63m,垂直方向优于6.98m.结果表明北斗系统在民航机场监测站的覆盖性及服务性能良好.