光学太阳反射器的性能评价试验规范

航天器在地面待发射期间和空间实际飞行过程中，热控元件光学太阳反射器要遇到各种地面和空间环境，为了航天器的可靠和长寿命，必须对所制备的ＯＳＲ涂层进行各种地面和空间环境试验并对其各项性能检验与考核，该文就这一系列试验的目的和规范进行了讨论。     

Spacecraft survivability in the natural debris environment near the stable Earth-Moon Lagrange points

The theoretical analysis of the motion of natural space debris near the stable Earth-Moon Lagrange Points, $L_4$ and $L_5$, is presented with a focus on the potential debris risks to spacecraft operating near these points. Specifically, the research formulates a debris propagation model using four-body dynamics, then applies candidate probabilistic survivability models to a notional spacecraft operating at the $L_4$ and $L_5$ Lagrange points to quantify the collision risks to the spacecraft from natural debris particles. Of the survivability models implemented, the natural debris collision risks to spacecraft survivability are found to be incredibly low, but mitigation strategies to reduce the risk further are identified in this study. Overall, research into stable Lagrange point natural debris propagation improves understanding of the collision risks posed by the naturally occurring Kordylewski clouds and enhances operational planning for Lagrange point space missions.     

大型航天器舱内流动与传热传质集成分析

在低流速、常温、层流假定下，利用数值模拟方法，实现了大型航天器返回舱、轨道舱内流动与传热传质分析．模拟结果表明，冷凝干燥组件、净化通风组件、风扇、热控风机和其他仪器设备对航天器舱内空气流动具有不同的影响；通过分析空气流场对舱内温度、空气湿度、二氧化碳浓度的影响，探讨了评价流场的质量和能量输运作用；从总体角度提出，通过一定的布局，设计出具有环流的全局流场的同时，具有流动与扩散相协调的局部流场，建立了统一流场的设计新思路．     

空间任意形状凸面的轨道空间外热流计算方法

采用蒙特卡罗（ＭｏｎｔｅＣａｒｌｏ）方法，进行了平板、半球面、抛物面的地球反照角系数和地球红外角系数计算，通过与文献数据的比较，证明了由此方法所编程序的可靠性和实用性。利用这种方法，可以计算空间任意形状凸表面的轨道空间外热流。     

论航天器环境工程在航天产品验证中的作用

论述了航天器环境工程对航天产品验证工作的重要性,介绍了国外的实践与有关标准,着重介绍了美军标 MIL-STD-1540D 中对航天产品的验证要求.     

OSIRIS-REx low-velocity particles during outbound cruise

We analyzed high-angular rate streaks first recorded by OSIRIS-REx’s MapCam during a 2017 search for Earth Trojan asteroids. We interpret them as water-ice particles that translated across the imager’s field of view, originating from the spacecraft itself. Their translation velocities approximated 0.1–1?m/s based on reasonable conclusions about their range. Pursuing several lines of investigation to seek a coherent hypothesis, we conclude that the episodic releases of the water ice particles are associated with spacecraft attitudes that resulted in solar illumination of previously shadowed regions. This correlation suggests that the OSIRIS-REx spacecraft itself possesses micro-climatic zones consisting of hot regions and cold traps that may temporarily potentially pass volatiles back and forth before losing most of them.     

基于量子化、芯片化的先进计量测试技术发展动态

计量是国家质量基础的重要组成部分，产品质量的提升离不开科学、精准的计量。工业发达国家极为重视计量测试技术的发展。通过搜集、整理量子效应计量、芯片级计量等国内外大量文献资料，归纳分析了近年来国外先进计量测试技术发展动态与趋势。以量子技术和基本物理常数为基础建立量子计量基标准，将大幅提高测量准确度和稳定性，结合量子效应的微加工技术实现芯片尺度的测量等，微纳尺度计量技术也在科学研究、精密测量、智能制造等领域得到广泛应用。本文可为我国计量技术发展提供借鉴。     

A shortcut to marking 3D target curves on curved surface via a galvanometric laser scanner

Marking arbitrary three-dimensional(3D) target curves on given objects with curved surface is required in many industrial fields, such as fabric prepreg placement in composite material part fabrication, product assembly, surface painting for decoration, etc. A shortcut to the solution of this intractable problem is proposed by utilizing a galvanometric laser scanner(GLS) with the aid of a camera. Without using the existing tedious GLS calibration procedures,the proposed method directly establishes a mapping between the 3D coordinates of the laser spots on the object surface and the control voltages of the scanner. A single-hidden layer feedforward neural network(SLFN) is employed to model the mapping. By projecting a dense grid of laser spots on the object to be marked and simultaneously taking only one image, the SLFN model is trained in minutes via a linear solving mechanism. Experiments demonstrate that the trained SLFN model has a good generalization performance for marking 3D target curves. The 3D laser marking errors on experimental objects are less than 0.5 mm. The proposed method is especially suitable for on-site use and can be conveniently extended to multiple GLSs for marking large complex objects.     

MD-130 胶黏剂固化工艺及空间适用性研究

为满足航天电子产品的工艺实施和空间服役要求,本文详细开展了MD-130胶黏剂的固化工艺及空间适应性研究。结果表明,在150℃等温固化60 min后其拉伸剪切强度达到18 MPa,表明其为优选的固化工艺。高低温环境冲击和低剂量的粒子辐照后胶黏剂固化反应更加充分,其芯片剪切强度提高,而大剂量辐照致使高分子降解现象明显,造成了胶接强度的降低。经环境试验后,MD-130胶黏剂仍具有良好的力学性能,满足设计使用要求。     

聚氨酯增韧改性 PISOX 树脂及其复合材料的性能

利用MDI与PTMG-2000制备聚氨酯预聚体,对聚(异氰脲酸酯-噁唑烷酮)树脂(PISOX)进行增韧改性:考察不同I/E、不同预聚体添加量的树脂浇铸体力学性能的变化;并对最优配方进行复合材料力学性能测试和DMTA测试,比较改性前后复合材料力学性能和耐热性能的变化;利用SEM观察改性前后微观形态的变化,推测增韧机理。结果表明,I/E=1.8、添加15%预聚体时树脂浇铸体综合力学性能最优,弯曲强度、弯曲模量、冲击强度分别为60.92 MPa、2 295 MPa、6.40 k J/m2;利用该基体制备复合材料,具有比未改性体系更优异的力学性能和界面性能,且聚氨酯预聚体的引入对树脂在高温下的耐热性能没有明显影响,其玻璃化转变温度均在258℃左右;对比改性前后体系固化物的微观结构,改性后的体系呈两相结构,橡胶相起到吸收冲击能和终止裂纹的作用,有效地提高了材料的韧性。