Collision risk-capacity tradeoff analysis of an en-route corridor model

Flow corridors are a new class of trajectory-based airspace which derives from the next generation air transportation system concept of operations. Reducing the airspace complexity and increasing the capacity are the main purposes of the en-route corridor. This paper analyzes the collision risk-capacity tradeoff using a combined discrete–continuous simulation method. A basic two-dimensional en-route flow corridor with performance rules is designed as the operational environment. A second-order system is established by combining the point mass model and the proportional derivative controller together to simulate the self-separation operations of the aircrafts in the corridor and the operation performance parameters from the User Manual for the Base of Aircraft Data are used in this research in order to improve the reliability. Simulation results indicate that the aircrafts can self-separate from each other efficiently by adjusting their velocities,and rationally setting the values of some variables can improve the rate and stability of the corridor with low risks of loss of separation.     

Singular formalism and admissible control of spacecraft with rotating flexible solar array

This paper is concerned with the attitude control of a three-axis-stabilized spacecraft which consists of a central rigid body and a flexible sun-tracking solar array driven by a solar array drive assembly. Based on the linearization of the dynamics of the spacecraft and the modal identi- ties about the flexible and rigid coupling matrices, the spacecraft attitude dynamics is reduced to a formally singular system with periodically varying parameters, which is quite different from a space- craft with fixed appendages. In the framework of the singular control theory, the regularity and impulse-freeness of the singular system is analyzed and then admissible attitude controllers are designed by Lyapunov＇s method. To improve the robustness against system uncertainties, an H∞ optimal control is designed by optimizing the H∞ norm of the system transfer function matrix. Comparative numerical experiments are performed to verify the theoretical results.     

Sliding mode control based guidance law with impact angle constraint

The terminal guidance problem for an unpowered lifting reentry vehicle against a sta- tionary target is considered. In addition to attacking the target with high accuracy, the vehicle is also expected to achieve a desired impact angle. In this paper, a sliding mode control （SMC）-based guidance law is developed to satisfy the terminal angle constraint. Firstly, a specific sliding mode function is designed, and the terminal requirements can be achieved by enforcing both the sliding mode function and its derivative to zero at the end of the flight. Then, a backstepping approach is used to ensure the finite-time reaching phase of the sliding mode and the analytic expression of the control effort can be obtained. The trajectories generated by this method only depend on the initial and terminal conditions of the terminal phase and the instantaneous states of the vehicle. In order to test the performance of the proposed guidance law in practical application, numerical simulations are carried out by taking all the aerodynamic parameters into consideration. The effec- tiveness of the proposed guidance law is verified by the simulation results in various scenarios.     

A discrete event systems approach to discriminating intermittent from permanent faults

Almost all work on model-based diagnosis （MBD） potentially presumes faults are per- sistent and does not take intermittent faults （IFs） into account. Therefore, it is common for diag- nosis systems to misjudge IFs as permanent faults （PFs）, which are the major cause of the problems of false alarms, cannot duplication and no fault found in aircraft avionics. To address this problem, a new fault model which includes PFs and IFs is presented based on discrete event systems （DESs）. Thereafter, an approach is given to discriminate between PFs and IFs by diagnosing the current fault. In this paper, the regulations of （PFs and IFs） fault evolution through fault and reset events along the traces of system are studied, and then label propagation function is modified to account for PFs and the dynamic behavior of IFs and diagnosability of PFs and IFs are defined. Finally, illustrative examples are presented to demonstrate the proposed approach, and the analysis results show the fault types can be discriminated within bounded delay if the system is diagnosable.     

A practical nonlinear robust control approach of electro-hydraulic load simulator

This paper studies a nonlinear robust control algorithm of the electro-hydraulic load simulator （EHLS）. The tracking performance of the EHLS is mainly limited by the actuator＇s motion disturbance, flow nonlinearity, and friction, etc. The developed controller is developed based on the nonlinear motion loading model. The problems of the actuator＇s disturbance and flow nonlinearity are considered. To address the friction problem, the friction model of the loading motor is identified experimentally. The friction disturbance is compensated using the obtained friction model. Therefore, this paper considers the main three factors comprehensively. The developed algorithm is easy to apply since the controller can be obtained just with one step back-stepping design. The stability of the developed algorithm is proven via Lyapunov analysis. Both co-simulation and experiments are performed to verify the effectiveness of this method.     

Application in prestiction friction compensation for angular velocity loop of inertially stabilized platforms

To overcome the influence of the nonlinear friction on the gimbaled servo-system of an inertial stabilized platforms(ISPs) with DC motor direct-drive, the methods of modeling and compensation of the nonlinear friction are proposed. Firstly, the inapplicability of LuGre model when trying to interpret the backward angular displacement in the prestiction regime is observed experimentally and the reason is deduced theoretically. Then, based on the dynamic model of direct-drive ISPs, a modified LuGre model is proposed to describe the characteristic of the friction in the prestiction regime. Furthermore, the state switch condition of the three friction regimes including presliding, gross sliding and prestiction is presented. Finally, a composite compensation controller including a nonlinear friction observer and a feedforward compensator based on the novel LuGre model is designed to restrain the nonlinear friction and to improve the control precision. Experimental results indicate that compared with those of the conventional proportion–integration–differentiation(PID) control method and the PID plus LuGre model-based friction compensation method, the dwell-time has decreased from 0.2 s to almost 0 s, the position error decreased to 86.7%and the peak-to-peak value of position error decreased to 80% after the novel compensation controller is added. It concludes that the composite compensation controller can greatly improve the control precision of the dynamic sealed ISPs.     

带迎角钨杆斜侵彻铝板数值仿真研究

为研究迎角对钨杆斜侵过程的影响,开展了带迎角钨杆斜侵彻铝板数值仿真研究。仿真中采用SPH方法,Shock状态方程和Steinberg本构模型。钨杆共有两种尺寸,分别为Φ10mm×23mm和Φ10mm×46mm。铝板厚10mm,撞击速度为2km/s,撞击角度为60°。为简化分析,将迎角分解为俯仰角和偏航角,其中俯仰角范围为-90°～90°,偏航角范围为0°～90°。对钨杆侵彻过程的分析结果表明：斜侵彻存在临界迎角,在临界迎角范围内钨杆所受力矩可忽略不计;在临界迎角范围外,钨杆将发生弯曲甚至折断。对钨杆的剩余质量分析结果表明：当偏航角为0°且钨杆未折断时,剩余质量只在较小的范围内变化;当俯仰角为0°时,剩余质量随迎角增加线性减小。对钨杆的剩余速度分析结果表明：偏航角对剩余速度的影响与俯仰角对剩余速度的影响基本一致,剩余速度曲线关于0°迎角基本对称。根据仿真结果,采用曲线拟合的方法给出了钨杆斜侵彻铝板的剩余速度经验公式。     

PI controller relay auto-tuning using delay and phase margin in PMSM drives

This paper presents an auto-tuning method for a proportion plus integral（PI） controller for permanent magnet synchronous motor（PMSM） drives, which is supposed to be embedded in electro-mechanical actuator（EMA） control module in aircraft. The method, based on a relay feedback with variable delay time, explores different critical points of the system frequency response.The Nyquist points of the plant can then be derived from the delay time and filter time constant.The coefficients of the PI controller can then be obtained by calculation while shifting the Nyquist point to a specific position to obtain the required phase margin. The major advantage of the autotuning method is that it can provide a series of tuning results for different system bandwidths and damping ratios, corresponding to the specification for delay time and phase margin. Simulation and experimental results for the PMSM controller verify the performance of both the current loop and the speed loop auto-tuning.     

一种直升机自旋训练过程涡轴发动机控制规律设计与仿真

针对直升机自旋训练过程中涡轴发动机快速响应要求,提出了一种以燃油流量和导叶角为控制量的鲁棒控制规律抑制自由涡轮转速瞬态下垂.首先,通过改进UH-60直升机/T700发动机综合模型,使之能够模拟自旋进入及自旋恢复过程动态变化.其次,提出并设计一种基于燃油流量和导叶调节的涡轴发动机鲁棒控制规律,并通过典型的自旋训练过程仿真,验证了该控制规律相比仅以燃油流量为变量的控制规律,自由涡轮转速瞬态下垂量降低至3%以下,且燃油流量变化更加平缓,改善了执行机构的工作条件.     

基于高速慢车的航空发动机快速响应控制

针对传统航空发动机响应速度慢,难以在紧急事件中用于控制受损飞机完成起降过程的问题,采用高速慢车控制模式来提升发动机加速性能,通过增加发动机在慢车时高压压气机转速,为加速前期提供更大的燃油流量,从而缩短发动机从慢车至最大状态的加速时间。为保证慢车时高压转子转速提高的同时发动机推力和稳定裕度不变,通过修改高压压气机可调导叶控制计划来调整高压转子工作点。仿真结果显示,与原有控制相比,采用高速慢车快速响应控制模式的发动机加速上升时间从原来的2.00s缩短至1.86s,而高压压气机最小喘振裕度仅由16.01%下降至14.81%,同时慢车推力基本保持不变。