基于飞行数据分析的发动机故障诊断系统研究

依据现有的发动机故障诊断方法,研究发动机故障诊断系统,通过对飞行数据中反映发动机性能指标的关键参数数据进行分析,说明系统对航空发动机故障诊断的可行性和必要性,研究结果对于提高发动机维护的快速性和准确性具有重要意义.     

不同直径圆球诱导燃烧的振荡机制与频率特性

为了分析不同直径圆球诱导振荡燃烧的规律，并揭示圆球大小在振荡燃烧现象中所发挥的深层次作用，本文采用二维轴对称Euler方程和基元反应模型，对不同直径的圆球在H2/air预混气体中诱导振荡燃烧的现象开展数值模拟研究。研究发现，振荡频率并不是简单地随直径增大而逐渐从高频向低频连续过渡，而是存在两次突变，形成了超高频、高频以及低频三种振荡燃烧模态。在两种模态间过渡时，振荡达到稳定状态前，会存在一段双频耦合的振荡阶段。三种不同振荡燃烧模态的产生是受到了不同振荡机制的作用，而两种模态间过渡时的双频耦合现象则是两种机制相互竞争的结果。     

倾转旋翼机巡航状态旋翼滑流影响

倾转旋翼机由于需要兼顾垂直起降和高速平飞2种典型工况下的动力需求，采用大直径旋翼作为推进装置会使机翼大部分处于旋翼滑流区内，这与常规螺旋桨飞机存在较大差异。为评估不同数值计算方法并研究旋翼滑流对倾转旋翼机气动特性的影响，针对选取两叶旋翼的某倾转旋翼机方案，利用激励盘模型、多参考系（MRF）模型、滑移网格模型分别进行了巡航状态下旋翼滑流对全机气动特性影响的数值模拟研究。结果表明:相对于无滑流状态，滑流定常影响使全机阻力增大，最大升阻比降低了7.5%，尾翼产生的升力增大，纵向静稳定度增加了17.1%，全机低头力矩增大；当迎角较小时，滑流虽然改变了机翼表面的升力分布，但是全机升力变化不大；滑流非定常影响会使全机气动特性产生周期性波动，升力系数波动幅度为9.0%，阻力系数波动幅度为10.8%，并且随着迎角的增大，波动幅度也越大。      

一种新的最速下降算法在自适应噪声对消中的应用

自适应噪声对消在很多领域有着重要应用。为了进行自适应噪声对消，提出了一种新的最速下降算法。该算法主要原理是对多元二次函数进行降维处理，使其变成一元二次函数，再应用抛物线的性质分别循环迭代地求解每一个维度上的极值。在自适应噪声对消应用中，所提算法与传统的自适应算法进行对比，具有收敛速度快，滤波效果好，滤波效果可调节，抗恶劣信噪比以及急剧变化信噪比，不需选择迭代步长，适合计算机和可编程硬件实现等优点。      

RN-FD型固体氡气源的稳定性及应用分析

对测氡仪器进行精确校准是氡测量工作中的重要环节,固体氡气源的稳定性、可靠性在校准中则显得至关重要。本文通过分析RN-FD型固体氡气源对闪烁室K值的稳定性实验结果,认为:RN-FD型固体氡气源标称的浓度值与实际浓度值不一致,标称浓度值只是理论浓度值而不是实际浓度值,需重新刻度才能使用;RN-FD型固体氡气源抽气循环时间不同则浓度不同,但抽气循环时间固定,观测结果比较稳定;对于没有α检查源的台站,RN-FD型固体氡气源可用于氡观测仪器坪区检查。     

Quantitative Rectangular Notch Detection of Laser-induced Lamb Waves in Aluminium Plates with Wavenumber Analysis

It is difficult to quantitatively detect defects by using the time domain or frequency domain features of Lamb wave signals due to their dispersion and multimodal characteristics.Therefore,it is important to discover an intrinsical parameter of Lamb waves that could be used as a damage sensitive feature.In this paper,quantitative defect detection in aluminium plates is carried out by means of wavenumber analysis approach.The wavenumber of excited Lamb wave mode is a fixed value,given a frequency,a thickness and material properties of the target plate.When Lamb waves propagate to the structural discontinuity,new wavenumber components are created by abrupt wavefield change.The new wavenumber components can be identified in the frequency-wavenumber domain.To estimate spatially dependent wavenumber values,a short-space two-dimensional Fourier transform(FT)method is presented for processing wavefield data of Lamb waves.The results can be used to determine the location,size and depth of rectangular notch.The analysis techniques are demonstrated using simulation examples of an aluminium plate with a rectangular notch.Then,the wavenumber analysis method is applied to simulation data that are obtained through a range of notch depths and widths.The results are analyzed and rules of the technique with regards to estimating notch depth are determined.Based on simulation results,guidelines for using the technique are developed.Finally,experimental wavefield data are obtained in aluminium plates with rectangular notches by a full noncontact transceiving method,i.e.,laser-laser method.Band-pass filtering combined with continuous wavelet transform is used to extract a certain frequency component from the full laser-induced wavefield with wide band.Shortspace two-dimensional FT method is used for further processing full wavefield data at a certain frequency to estimate spatially dependent wavenumber values.The consistency of simulation and experimental results shows the effectiveness of proposed wavenumber method for quantitative rectangular notch detection.     

考虑探测构形的多飞行器协同探测与制导一体化设计

针对多飞行器协同拦截机动目标时几何构形会影响协同探测和制导效果的问题，基于最优控制理论提出一种考虑探测构形的协同探测与制导一体化设计方法。基于飞行器相对运动学、动力学方程和双视线协同探测原理，建立了协同拦截模型。在制导设计中引入视线分离角参量以调制协同探测几何构形、减小相对距离探测误差，从而在制导全程增强协同探测效果。将相对距离协同探测结果应用到剩余时间和制导律解算中，基于最优控制理论实现协同探测与制导环节一体化设计。仿真结果表明：在目标进行不同程度机动的情况下，与修正比例导引律相比，所提方法在协同探测和制导方面均具有明显优势。     

Event-triggered attitude control of spacecraft

The problem of spacecraft attitude stabilization control system with limited communication and external disturbances is investigated based on an event-triggered control scheme. In the proposed scheme, information of attitude and control torque only need to be transmitted at some discrete triggered times when a defined measurement error exceeds a state-dependent threshold. The proposed control scheme not only guarantees that spacecraft attitude control errors converge toward a small invariant set containing the origin, but also ensures that there is no accumulation of triggering instants. The performance of the proposed control scheme is demonstrated through numerical simulation.     

北斗空间信号误差统计特征及描述方法研究

通过对比北斗卫星导航系统(BeiDou Navigation Satellite System,BDS)广播星历与事后精密星历,提取了轨道和卫星时钟误差。基于北斗轨道误差及北斗卫星时钟误差统计特征分析,构建区别于全球定位系统(Global Positioning System,GPS)的BDS空间信号用户测距误差(Signal-In-Space User Range Error,SISRE)描述方法,对BDS广播星历中用户测距精度(User Range Accuracy,URA)进行了验证。6个月的北斗数据测试结果表明,北斗GEO、IGSO和MEO卫星的URA分别为3.0m、1.9m和1.6m。