同轴离心式喷嘴热声不稳定性递归分析

为获得同轴离心式喷嘴燃烧动力学特性，开展了喷注单元稳定性试验研究。试验中燃料流量不变，随氧化剂流量增加，热声系统依次经历了燃烧噪声状态、阵发状态和准周期振荡状态。采用递归方法对实验结果进行分析。首先，利用交互信息法和虚假最邻近法分别求解最优延迟时间和嵌入维数，获得了典型工况下的相空间轨迹图。其次，递归图分析表明系统出现了第II类阵发现象，意味着系统发生了亚临界Hopf分叉，与实验结果一致。最后，递归量化分析表明，确定率可以将阵发状态和准周期振荡状态与燃烧噪声状态区分出来，并可以对热声振荡进行预报。     

基于PDCA的网络教育质量持续改进模型研究

分析制约我国网络教育质量的主要因素,构建基于改进的PDCA的网络教育质量持续改进模型,提出网络教育质量持续改进的步骤与确保网络教育质量持续改进的支持要素,为网络教育质量的提高提供一种行之有效的方法.     

Lunar lander's three-dimensional translation and yaw rotation motion estimation during a descent phase using optical navigation

Optical navigation for a lunar lander consists of estimating a lander's 3-dimensional (3-D) relative dynamic motion with respect to a preselected landing site using a passive 2-dimensional (2-D) video image sequence. Lunar landing missions require a lander to perform an autonomous accurate landing with simple mechanical structure, easy operation and low cost. These requirements have motivated the need to develop an advanced navigation system. Existing navigation systems trade-off simplicity, accuracy and cost. High accuracy navigation systems typically imply complexity and high cost. In this paper, we consider a scenario where the descending phase starts from an initial altitude of 10 km with a time-of-descent of 100 s. The navigation camera is an off-the-shelf optical instrument used to take the video image sequence of the landing site during the landing phase. It is fed into the motion estimation algorithm to be processed. The continuous wavelet transform (CWT) is used to analyse each image frame of the input digital video image sequence. The output is a 2-D video image motion trajectory map, which represents the projection motion of the landing site. The 2-D video image motion is projected back to the 3-D lander's relative motion based on a geometric analysis. The outputs of this estimation algorithm are the 3-D attitude motion parameters of the lander at a time corresponding to an image being taken. The attitude determination and control system (ADCS) of the lander uses these data to perform the lander's attitude control task. In this article, we provide the motion modelling for a lunar lander during the descending phase. The projection of a 3-D planar to 2-D image plane is analysed which build the correspondence between the 3-D lander's motion and the 2-D image motion. This link provides the evidence for the geometry analysis. CWT is reviewed and CWT for video image sequence analysis is also introduced. Numerical simulation of the estimated 2-D video image sequence under the lander performing a 3-D translation and yaw rotation during the terminal descent are shown to verify the proposed concepts. The analysis of the results show that the proposed method achieves highly accurate 2-D video image motion estimation of less then 1% error with significant savings of cost, mass and volume. It leads to the accurate estimation of the lander's 3-D relative motion with respect to the landing site.     

考虑流固耦合作用的一维供应管路-喷嘴系统动力学特性

为了更加深入地研究供应管路-喷嘴系统的动态特性,在喷嘴动力学理论的基础上,建立了考虑供应管路流固耦合作用的传递矩阵组合计算模型。针对三种典型液体火箭发动机喷嘴与一维供应管路组成的系统,开展了两端固定边界的系统动力学特性数值模拟。结果表明:管路结构谐振与管内流体谐振所导致的喷嘴出口位置流体速度振荡量级相当,管路流固耦合作用对系统动态特性的影响不能忽略;管路结构谐振是造成其固定位置应力的频率响应幅值较高的主要因素;当流体与结构的谐振频率接近时,会产生一个大带宽、高幅值的应力耦合振荡区间,随着管壁厚度的增大,耦合振荡的带宽也随之增大;对于文中算例,流固耦合作用对流体谐振造成的系统振荡具有约5%的降频作用。     

Indicators of black-hole mass and Eddington accretion ratio from QSO X-ray and UV spectra

The evolution of luminous QSOs is linked to the evolution of massive galaxies. We know this because the relic black-holes found locally have masses dependent on the properties of the host galaxy’s bulge. An important way to explore this evolution would be to measure dependences of black-hole masses and Eddington accretion ratios over a range of redshifts, i.e., with cosmological age. For low redshift QSOs (and their lower luminosity Seyfert galaxy counterparts) it has been possible to infer black-hole masses from the luminosities and velocity dispersions of their host-galaxy bulges. These masses agree with those virial black-hole masses calculated from the Doppler widths of the broad Hβ emission lines. The latter method can then be extended to more distant and luminous QSOs, up to redshifts of 0.6 with ground-based optical observations. We discuss ways to extend these explorations to higher redshifts – up to 3 using the widths of QSOs’ broad UV emission lines, and in principle, and to redshifts near 4 from ground-based infrared observations of rest-frame Hβ at 2.5 μm. We discuss the possibility of investigating the accretion history of the higher redshift QSOs using measures of Eddington accretion ratio – the soft X-ray spectral index and the eigenvectors of Principal Components Analyses of QSOs’ UV emission-line spectra.     

激光功率与底面状态对选区激光熔化球化的影响

为研究激光功率与底面状态对选区激光熔化熔池流动的影响，基于离散单元法建立了选区激光熔化铺粉模型，采用粒径分布与实验相符的马氏体时效钢粉末分别铺展到平坦底面和增材底面上，将计算获得的粉末分布导入到基于有限体积法建立的选区激光熔化熔池计算流体力学模型中，研究激光功率和基板底面粗糙度对熔池流动和熔道表面形貌的影响。采用激光单道扫描实验验证铺粉模型和选区激光熔化模型。结果表明：随着激光功率的降低，单位长度的球化数量增加；由于增材底面使熔池润湿性变差，同时又对熔池流动行为产生扰动，使得增材粗糙底面上熔道的球化数量增加。选区激光熔化铺粉模拟及激光单道扫描模拟结果与实验结果吻合较好。本研究可为选区激光熔化工艺中工艺参数的选择提供理论指导。     

A practical nonlinear robust control approach of electro-hydraulic load simulator

This paper studies a nonlinear robust control algorithm of the electro-hydraulic load simulator （EHLS）. The tracking performance of the EHLS is mainly limited by the actuator＇s motion disturbance, flow nonlinearity, and friction, etc. The developed controller is developed based on the nonlinear motion loading model. The problems of the actuator＇s disturbance and flow nonlinearity are considered. To address the friction problem, the friction model of the loading motor is identified experimentally. The friction disturbance is compensated using the obtained friction model. Therefore, this paper considers the main three factors comprehensively. The developed algorithm is easy to apply since the controller can be obtained just with one step back-stepping design. The stability of the developed algorithm is proven via Lyapunov analysis. Both co-simulation and experiments are performed to verify the effectiveness of this method.     

基于粒子群优化算法的不完全数据的处理

不完全信息下的数据挖掘是一个困难的问题，但它在实际决策中是不可避免的。在介绍几种处理方法的基础上，提出了基于粒子群优化算法的处理方法。对适应函数进行了讨论，实例表明该方法比较有效。     

基于Matlab语言的系统可靠性仿真

Matlab是一种高性能数值计算语言 ,本文用Matlab语言编制系统可靠性仿真程序 ,并给出了具体实例。此方法比其他方法简单有效 ,可适用于复杂系统。     

含催化剂RDXCMDB推进剂燃烧机理研究

利用常压ＤＳＣ及ＴＧ／ＤＴＧ，高压ＤＳＣ，单幅照相和燃烧波温度分布测试技术对含ＲＤＸ的复合改性双基推进剂（ＲＤＸＣＭＤＢ）含和不含催化剂时的燃烧机理进行了研究，得到了该种推进剂在热分解和燃烧方面的一些重要结果。