CFD predictions of LBO limits for aero-engine combustors using fuel iterative approximation

Lean blow-out (LBO) is critical to operational performance of combustion systems in propulsion and power generation. Current predictive tools for LBO limits are based on decadesold empirical correlations that have limited applicability for modern combustor designs. According to the Lefebvre’s model for LBO and classical perfect stirred reactor (PSR) concept, a load parameter (LP) is proposed for LBO analysis of aero-engine combustors in this paper. The parameters contained in load parameter are all estimated from the non-reacting flow field of a combustor that is obtained by numerical simulation. Additionally, based on the load parameter, a method of fuel iterative approximation (FIA) is proposed to predict the LBO limit of the combustor. Compared with experimental data for 19 combustors, it is found that load parameter can represent the actual combustion load of the combustor near LBO and have good relativity with LBO fuel/air ratio (FAR). The LBO FAR obtained by FIA shows good agreement with experimental data, the maximum prediction uncertainty of FIA is about ±17.5%. Because only the non-reacting flow is simulated, the time cost of the LBO limit prediction using FIA is relatively low (about 6 h for one combustor with computer equipment of CPU 2.66 GHz · 4 and 4 GB memory), showing that FIA is reliable and efficient to be used for practical applications.     

发动机推力及拦阻力对起落架载荷的影响分析

以某型舰载飞机为研究对象,建立舰载机拦阻着舰动力学模型,考虑了拦截索拉力、气动力和发动机推力.对模型进行数值求解,分析在拦阻过程中发动机推力及拦阻力对起落架缓冲器轴力的影响.结果表明:在舰载机着舰前0.3s内,发动机推力和拦阻力对起落架缓冲器轴力影响很小;0.3 s后发动机推力会同时增大起落架缓冲器轴力峰值;拦阻力会增大前起落架缓冲器轴力峰值,减小主起落架缓冲器轴力峰值.     

旋转条件下大长径比固体火箭发动机三维内流场数值模拟

根据燃面的平行层推移原理,获得了某大长径比固体火箭发动机装药燃面变化过程。采用有限体积法计算了发动机在旋转飞行状态下的三维稳态流场,着重分析了不同时刻药柱开槽部分和燃烧室尾部的流速、流迹分布及其对发动机正常工作的影响,认为发动机尾部热防护以及药柱悬臂段强度是保证其正常工作的关键因素。     

基于系统动力学的装备研制项目风险传递研究

通过对装备研制项目进行系统分析,确定了项目技术风险、费用风险和工期风险三者相互之间的影响方式和传递关系,建立了基于系统动力学的项目研制活动风险传递因果关系模型。运用VensimPLE软件对某型装备研制项目研制活动的技术风险、费用风险和工期风险的变化规律进行了仿真。结果表明,技术风险对费用风险和工期风险有着显著的影响,这三者均随项目活动的推进而逐渐降低。3种类型风险随时间的动态变化可作为项目风险管理工作的参考和决策支持。     

双轮支柱式起落架低频刹车耦合振动性能研究

当前对于起落架低频刹车耦合振动问题的研究主要停留在纵向单自由度振动方面,对于双轮支柱式起落架存在的多自由度耦合振动问题研究比较欠缺。本文在多体动力学软件Simcenter 3D 中建立双轮支柱式起落架多自由度低频刹车耦合振动多体动力学模型,在机身与主起落架连接处采用六自由度衬套模型模拟起落架支柱纵向、横向和扭转刚度及结...     

环柱式天线展开过程耦合动力学分析

针对环柱式天线展开过程中斜拉绳索释放运动与桁架展开运动之间耦合动力学分析困难的问题,采用非线性欧拉梁单元对斜拉绳索建模,基于几何精确梁理论对环形桁架建模,提出了环柱式天线多体系统模型,实现了结构展开过程中绳索释放与桁架展开耦合动力学的精准仿真,揭示了绳索柔性等因素对桁架伸展起阻碍作用的机理。仿真结果表明,在环柱式天线展开过程中,减小绳索模量,降低绳索直径,采用单绳索分布设计,有利于提高桁架的展开稳定性。另外,绳索柔性对桁架展开中间阶段影响最为显著。该分析结果为环柱式天线在轨展开动力学预示和优化设计提供了指导作用。     

Delaying stall of morphing wing by periodic trailing-edge deflection

Morphing wings can improve aircraft performance during different flight phases. Recently research has focused on steady aerodynamic characteristics of the morphing wing with a flexible trailing-edge, and the unsteady aerodynamic and stall characteristics in the deflection process of the morphing wing are worthy further investigation. The effects of the angle of attack and deflection rate on aerodynamic characteristics were examined, and based on the aerodynamic characteristics of the morphing wing, a method was developed to delay stall by using the flexible periodic trailing-edge deflection. The numerical results show that the lift coefficients in the deflection process are smaller than those in the static situation at small angles of attack, and that the higher the deflection rate is, the smaller the lift coefficients will be. On the contrary, at large angles of attack, the lift coefficients are higher than those in the static case, and they become larger with the increase of the deflection rate. Further, the periodic deflection of the flexible trailing-edge with a small deflection amplitude and high deflection rate can increase lift coefficients at the critical stall angle.     

Optimal three-dimensional impact time guidance with seeker’s field-of-view constraint

This paper proposes a new three-dimensional optimal guidance law for impact time control with seeker’s Field-of-View (FOV) constraint to intercept a stationary target. The proposed guidance law is devised in conjunction with the concept of biased Proportional Navigation Guidance (PNG). The guidance law developed leverages a nonlinear function to ensure the boundedness of velocity lead angle to cater to the seeker’s FOV limit. It is proven that the impact time error is nullified in a finite-time under the proposed method. Additionally, the optimality of the biased command is theoretically analyzed. Numerical simulations confirm the superiority of the proposed method and validate the analytic findings.     

Experimental Study of Corner Stall in a Linear Compressor Cascade

In order to gain a better knowledge of the mechanisms and to calibrate computational fluid dynamics (CFD) tools including both Reynolds-averaged Navier-Stokes (RANS) and large eddy simulation (LES),a detailed and accurate experimental study of corner stall in a linear compressor cascade has been carried out.Data are taken at a Reynolds number of 382 000 based on blade chord and inlet velocity.At first,inlet flow boundary layer is surveyed using hot-wire anemometry.Then in order to investigate the effects of incidence,measurements are acquired at five incidences,including static pressures on both blade and endwall surfaces measured by pressure taps and the total pressure losses of outlet flow measured by a five-hole pressure probe.The maximum losses as well as the extent of losses of the corner stall are presented as a function of the investigated incidences.     

微机电系统MEMS仿真与建模

微机电系统是源于微电子加工技术,融合了微机械制造、传感、致动及微控制于一体的系统。微机电系统融合了力、电、流体、光、磁、热等多个物理域,随着建模与仿真技术的迅速发展,研究有关微机电系统建模与仿真的基本理论和方法。