PBT弹性体微相分离及对其力学性能的影响研究

为了获得微相分离对宽温PBT叠氮聚醚弹性体力学性能的影响规律,用红外光谱分析法(FT-IR)和动态热力学分析法(DMA)研究了PBT叠氮聚醚弹性体产生微相分离的机理和影响因素。用调节硬段含量、交联参数的方法调控其微相分离,控制适当的微相分离程度可显著改善推进剂的力学性能。研究结果表明:在二元醇扩链的弹性体体系中,当硬段含量约为15%时,弹性体发生相对最大比例的微相分离,体现出较佳的综合力学性能。通过微相分离的调控可获得宽温范围内综合力学性能较好的叠氮聚醚推进剂用粘合剂基体材料。     

Early analysis of precise orbit and clock offset determination for the satellites of the global BeiDou-3 system

Eight new-generation BeiDou satellites (BeiDou-3) have been launched into Medium Earth Orbit (MEO), allowing for global coverage since March 2018, and they are equipped with new hydrogen atomic clocks and updated rubidium clocks. Firstly, we analyzed the signals for the carrier-to-noise-density ratio (C/N0) and pseudorange multipath (MP) by using international GNSS (Global Navigation Satellite System) Monitoring and Assessment System (iGMAS) station data, and found that B1C has a lower C/N0, and B2a has the same level of C/N0 as the B1I and B3I signals. For pseudorange multipath, compared with the BeiDou-2 satellites, the obvious systematic variation of MP scatters related to the elevation angle is greatly improved for the BeiDou-3 and BeiDou-3e satellites signals. For the signals of the BeiDou-3 satellites, the order of the Root Mean Square (RMS) values of multipath and noise is B3I?<?B1I?<?B2a?<?B1C. Then, the comparison of the precise orbit determination and clock offset determination for the BeiDou-2, BeiDou-3, and BeiDou-3 experimental (BeiDou-3e) satellites was done by using 10 stations from iGMAS. The 3D precision of the 24?h orbit overlap is 24.55, 25.61, and 23.35?cm for the BeiDou-3, BeiDou-3e, and BeiDou-2 satellites, respectively. BeiDou-3 satellite has a comparable precision to that of the BeiDou-2 satellite. For the precision of clock offset estimation, the Standard Deviation (STD) of the BeiDou-3 MEO satellite is 0.350?ns, which is an improvement of 0.042?ns over that of the BeiDou-2 MEO satellite. The stabilities of the BeiDou-3 and BeiDou-3e onboard clocks are better than those of BeiDou-2 by factors of 2.84 and 1.61 at an averaging time of 1000 and 10,000?s, respectively.     

RTK model and positioning performance analysis using Galileo four-frequency observations

This paper proposes a real-time kinematic (RTK) model that uses one common reference satellite for the Galileo system with four frequency observations. In the proposed model, the double-differenced (DD) pseudorange and carrier phase biases among the different frequencies are estimated as unknown parameters to recover the integer features of the DD ambiguities among the different frequencies for ambiguity resolution and precise positioning. Analysis results show that the E5a, E5b, and E5 frequencies have virtually the same performance in terms of the positioning accuracy, observation residuals, and ratio values of ambiguity resolution. However, the E1 frequency performs worse than the E5a, E5b, and E5 frequencies. The RTK results for the combination of multiple frequencies are much better than those for a single-frequency observation, the coordinates’ standard deviation is improved about 20–30%, and the ambiguity fix time is improved about 10%.     

Availability modeling for periodically inspection system with different lifetime and repair-time distribution

Availability is a main feature of design and operation of all engineering system. Recently,availability evaluation of periodical inspection systems with different structures is at the center of attention due to the wide application in engineering. In this paper, an analytical and probabilistic availability model for periodical inspection system is proposed by a new recursively algorithm,which can achieve limiting average availability and instantaneous availability of periodical inspection system under arbitrary lifetime and repair-time distributions. Then three application examples are presented, the systems lifetime and repair-time are respectively fellow exponential/exponential,Weibull/normal and Weibull/lognormal distribution. Finally, a Weibull/lognormal system is studied to analyze the dynamic relationship between inspection period and availability. The results indicate that the proposed approach can provide the technology support for improving system availability and determining reasonable inspection period.     

基于ESO的高超声速飞行器解耦控制

针对高超声速飞行器三通道具有强耦合的问题，提出一种基于扩张状态观测器的全通道解耦控制方法。该方法不需要根据耦合项特点设计耦合补偿模型，而是通过设计扩张状态观测器，将高超声速飞行器耦合项视为扰动，利用扩张状态观测器具有实时跟踪估计扰动的能力，将耦合项扰动估计出来。通过补偿控制来消除耦合的影响，从而完成解耦控制。进一步，通过LQR控制方法完成姿态控制系统的闭环反馈控制律设计，最终实现一种工程上实用的高超声速飞行器解耦控制方法，并通过数学仿真验证了该控制方法的正确性和有效性。     

基于区间灰色不确定语言的工作类型优化方法

针对飞机维修任务工作类型优化过程中的模糊与灰色问题,采用区间灰色不确定语言变量建立工作类型的评价指标和决策模型,提出了军机维修任务工作类型优化方法。对优化方法进行了实例分析,工作类型排序结果和数据对比结果验证了优化方法的可行性与有效性。在某军机上对优化方法进行了工程应用,完成192项初始维修任务工作类型优化,应用结果表明了该优化方法具备良好的工程应用价值,可有效提升工作类型合理性。     

装备体系贡献率评估方法探究

未来装备必须坚持体系化发展,并通过贡献率评估明确在体系中的地位和作用。明确了装备体系贡献率的定义和评估意义,分析了定性评估法、基础技战术指标比较法、综合技战术指标灰靶比较法、基于装备体系的网络层次分析法、基于体系仿真及效能评估法等装备贡献率评估方法,并给出了灰靶比较法、网络层次分析法具体评估实例。同时,结合各评估方法特点,提出了网络层次分析法、体系仿真及效能评估法相结合的改进综合评估方法流程,实现装备体系贡献率的准确评估。     

150 N气氧/煤油发动机涡流冷却技术试验

为探索百牛量级姿控发动机采用气氧/煤油涡流冷却推力室的可行性,开展了涡流冷却技术的试验验证工作。在理论分析和数值仿真的基础上,完成了150 N气氧/煤油涡流冷却推力室设计。数值仿真结果表明:内旋流区域占燃烧室直径D_c的87.8%,燃烧化学反应发生在39%～81%R_c的环形区域。经热试考核,燃烧室点火可靠,工作稳定,燃烧效率达0.91;形成了有效的气膜冷却,壁面和头部热防护可靠,充分验证了内外双漩涡结构的存在。     

一种手持式太赫兹探测系统的光学及结构设计*

随着现代安检技术与健康、隐私问题之间的矛盾愈加突出,人们迫切需要高效、便捷、安全的安检技术。首先介绍太赫兹非成像光谱探测技术的原理,提出适合于安检应用的太赫兹光谱探测系统技术指标,然后基于ZEMAX设计出配合该技术指标的光学系统,采用非序列模式对其进行仿真和评价,最后基于ProE设计完成了配合上述光学系统的紧凑型探测系统结构,实现了探测系统的手持式应用。