张力腿漂浮式风力机的运动响应计算

漂浮式风力机与近海桩基式风力机、陆上风力机差异很大,特别是漂浮平台设计复杂,对仿真工具要求更高。海上风力机除受气动载荷之外,还需进一步考虑海洋环境所施加的各种其他载荷。采用自由涡尾迹方法计算风力机气动性能,分别采用线性波和PM频谱模拟波浪运动并应用Morison方程计算波浪载荷。构建张力腿漂浮平台结构动力学方程,以气动载荷和波浪载荷为激励,得到平台响应,并反馈至气动计算,从而完成气动、结构和水动的耦合计算。最后以大型风力机NH1500为例,对张力腿式海上风力机进行仿真模拟,对比分析来流风速、浪高和波浪入流角对漂浮平台运动和风力机气动性能的影响,采用PM频谱模拟真实海况并计算漂浮式风力机动态响应,为漂浮式风力机设计提供了依据。     

IDS contribution to ITRF2008

For the first time, the International DORIS Service (IDS) has produced a technique level combination based on the contributions of seven analysis centers (ACs), including the European Space Operations Center (ESOC), Geodetic Observatory Pecny (GOP), Geoscience Australia (GAU), the NASA Goddard Space Flight Center (GSFC), the Institut Géographique National (IGN), the Institute of Astronomy, Russian Academy of Sciences (INASAN, named as INA), and CNES/CLS (named as LCA). The ACs used five different software packages to process the DORIS data from 1992 to 2008, including NAPEOS (ESA), Bernese (GOP), GEODYN (GAU, GSC), GIPSY/OASIS (INA), and GINS (LCA). The data from seven DORIS satellites, TOPEX/Poseidon, SPOT-2, SPOT-3, SPOT-4, SPOT-5, Envisat and Jason-1 were processed and all the analysis centers produced weekly SINEX files in either variance–covariance or normal equation format. The processing by the analysis centers used the latest GRACE-derived gravity models, forward modelling of atmospheric gravity, updates to the radiation pressure modelling to improve the DORIS geocenter solutions, denser parameterization of empirically determined drag coefficients to improve station and EOP solutions, especially near the solar maximum in 2001–2002, updated troposphere mapping functions, and an ITRF2005-derived station set for orbit determination, DPOD2005. The CATREF software was used to process the weekly AC solutions, and produce three iterations of an IDS global weekly combination. Between the development of the initial solution IDS-1, and the final solution, IDS-3, the ACs improved their analysis strategies and submitted updated solutions to eliminate troposphere-derived biases in the solution scale, to reduce drag-related degradations in station positioning, and to refine the estimation strategy to improve the combination geocenter solution. An analysis of the frequency content of the individual AC geocenter and scale solutions was used as the basis to define the scale and geocenter of the IDS-3 combination. The final IDS-3 combination has an internal position consistency (WRMS) that is 15 to 20 mm before 2002 and 8 to 10 mm after 2002, when 4 or 5 satellites contribute to the weekly solutions. The final IDS-3 combination includes solutions for 130 DORIS stations on 67 different sites of which 35 have occupations over 16 years (1993.0–2009.0). The EOPs from the IDS-3 combination were compared with the IERS 05 C04 time series and the RMS agreement was 0.24 mas and 0.35 mas for the X and Y components of polar motion. The comparison to ITRF2005 in station position shows an agreement of 6 to 8 mm RMS in horizontal and 10.3 mm in height. The RMS comparison to ITRF2005 in station velocity is at 1.8 mm/year on the East component, to 1.2 mm/year in North component and 1.6 mm/year in height.     

有磁场时电子在航天器光电子鞘层中的漂移运动

采用二级漂移近似理论，研究了在航天器光电子鞘层中与电流收集有关的电子在磁场中的运动轨道和收集电子有关的磁瓶结构，结果表明当磁场越强，航天器表面电势越弱，磁瓶在无穷远处横截面积就越小。在光电子鞘层中，势垒对电流收集影响较大，磁瓶的横截面积在略远于垫垒处有极大值，磁瓶在无穷远处的横截面积并非随着势垒距航天器距离的远近而单调变化。     

Periodic relative orbits of two spacecraft subject to differential gravity and electrostatic forcing

Coulomb forces between charged close-flying satellites can be used for formation control, and constant electric potentials enable static equilibria solutions. In this work, open-loop time-varying potential functions, which produce periodic, two-craft, Coulomb formation motions are demonstrated for the first time. This is done in the rotating Hill-Frame, with linearized gravity, and craft position components assumed in the form of simple harmonic oscillators. Substitution of the oscillatory functions into the dynamics, further constrains these functions, and yields necessary potential histories, to produce the periodic flow. The assumed position functions, however, are not arbitrary, since the dynamical model restricts what oscillatory trajectories are allowed. Specifically, a Hill-Frame integral of motion is derived, and this is used to show certain candidate periodic functions to be inadmissible. The system dynamics are then linearized to expose stability properties of the solutions, and it is established that asymptotic stability is impossible for all orbit families. Finally, the degree of instability in the assumed motions, over free parameter ranges, is determined numerically via the Floquet multipliers of the associated full-cycle state-transition matrices.     

Hybrid optimization for multiple-impulse reconfiguration trajectories of satellite formation flying

A hybrid optimization method is developed for fuel-optimal reconfigurations of a group of satellites flying in formation. The genetic algorithm performs a global search to find two-impulse trajectories, and primer vector analysis finds multiple-impulsive local optimal trajectories with the two-impulse trajectories as initial guesses. Hybrid optimization finds globally optimal trajectories for formation reconfigurations, including formation resizing, reassignment and reorientation maneuvers. Multiple-impulse trajectories reduce the fuel consumption from the two-impulse trajectories by up to 4.4% for those maneuvers. In real missions, satellites can follow two-impulse trajectories to gain the advantage of a smaller number of impulses, with the cost of slightly more propellant. The qualitative characteristics of the optimal trajectories are analyzed from the number of optimal trajectories found by hybrid optimization.     

具有轴向流的可压缩非定常旋涡流

本文研究埋定常轴对称自由旋涡流动结构的可压缩效应，探索旋涡的密度变化，粘性扩散和热传导的耦合作用机制。在回顾了前人某些典型结果之后，首次给邮了具有轴向拉伸率的可压缩非定常轴对称自由旋涡在高Ｒｅ数和小Ｍ数下的近似解析解。     

氢涡轮泵转子不稳定因素分析

通过实例说明，液氢低温下钢和铝材料收缩量不同所引起的转子松动可能是氢涡轮泵次同步进动的主要原因。     

一种圆锥运动条件下的等效旋转矢量算法研究

传统旋转矢量姿态算法一般采用陀螺的角增量信号来构造积分算法,当应用于输出为角速率的光纤陀螺捷联系统时,通过角速率提取角增量,算法会损失一定精度。提出了一种以陀螺角速率信号与角增量信号同时作为输入的改进旋转矢量姿态算法,进一步补偿了圆锥误差,提高了计算精度。仿真结果表明,该算法与传统二子样算法相比较,计算量相当,姿态精度、速度精度、位置精度有大幅度的提升。     

Remote-controlled flexible pose measurement system and method for a moving target in wind tunnel

The measurement of position and attitude parameters for the isolated target from a high-speed aircraft is a great challenge in the field of wind tunnel simulation technology. This paper proposes a remote-controlled flexible pose measurement system in wind tunnel conditions for the separation of a target from an aircraft. The position and attitude parameters of a moving object are obtained by utilizing a single camera with a focal length and camera orientation that can be changed based on different measurement conditions. Using this proposed system and method, both the flexibility and efficiency of the pose measurement system can be enhanced in wind tunnel conditions to meet the measurement requirements of different objects and experiments, which is also useful for the development of an intelligent position and attitude measurement system. The position and the focal length of the camera also can be controlled remotely during measurements to enlarge both the vertical and horizontal measurement range of this system. Experiments are conducted in the laboratory to measure the position and attitude of moving objects with high flexibility and efficiency, and the measurement precision of the measurement system is also verified through experiments.     

基于动网格技术的飞机舱弹分离过程 CFD/ RBD耦合数值仿真

飞机舱弹分离瞬间特性严重影响导弹/炸弹的打击精度。采用计算流体动力学(CFD)和刚体动力学(RBD)模型耦合求解的数值仿真方法,应用网格弹性光顺和局部重构相结合的动网格技术,有效地避免了刚体运动而引起的网格畸变,仿真计算了炸弹舱弹分离后俯仰角度变化过程 .仿真结果表明,舱弹分离时向炸弹施加 1个合适的抛 射力矩,有助于炸弹在下降过程中快速地调整其打击姿态。