宽高比及表面粗糙度对矩形微尺度通道流动特性的影响

实验研究了不同宽高比矩形金属微尺度通道的流动特性,并与硅通道对比来探究表面粗糙度的影响。金属微尺度通道宽为0.4mm,通道宽高比分别为0.50、0.67、和1.00,相对表面粗糙度范围为0.1609%~0.2145%。硅通道宽度及高度都为0.4mm,相对表面粗糙度为0.00325%。实验工质为空气,实验的雷诺数范围是250~3000。实验结果表明:在粗糙微尺度通道会发生转捩提前,并且转捩雷诺数随着宽高比增大而减小。在层流区,微尺度矩形通道摩擦因数随着雷诺数增大而减小,在转捩区出现明显增大后再减小。表面粗糙度很小时,未发现转捩提前现象。      

联合截获威胁下的雷达射频隐身目标搜索算法

针对基于射频(RF)隐身需求的机载雷达目标搜索问题进行了研究。通过分析实际作战中射频辐射面临的截获威胁,提出了一种基于联合截获威胁的射频隐身性能表征方法,并给出了具体的值估算方法;对机载雷达搜索任务中辐射参数的优化问题进行了建模,并采用优化算法对目标函数进行求解。通过分析典型情景下解集的分布特点,给出了从最优解集中选取最终解的方法。结果表明,提出的射频隐身性能表征方法能更好地反映截获实现过程的多域需求,提出的雷达搜索方法能够在保证探测性能的同时,提高射频隐身性能和搜索速度,能够为相控阵雷达搜索任务中参数的优化控制提供方法和依据。     

考虑气动力非线性的柔性飞机阵风响应分析

针对大展弦比柔性飞机阵风响应问题,考虑在大攻角(AOA)情况下气动力非线性的影响,通过将修正的Theodorsen方法与片条理论相结合,得到非线性的时域非定常气动力;在此基础上,建立阵风干扰下的大展弦比柔性飞机非线性气动弹性模型,完整地发展了一种新颖的可考虑气动力非线性的大展弦比柔性飞机阵风响应分析方法.结合算例模型开展方法验证和数值仿真,对比翼尖和质心(CG)处阵风附加过载在线性和非线性情况下的变化.算例结果表明,考虑大攻角情况下的气动力非线性后,大展弦比飞机的阵风响应较线性情况有明显变化,翼尖处的阵风附加过载最多可减少41.7%,气动力非线性的影响不可忽视.      

受限空间中天线产生的电波覆盖研究

受限空间中的有效电波覆盖直接影响通信质量和可靠性,对天线系统的布局优化尤为重要.然而现有的研究很少考虑本来就处于隧道中的天线参数对电波覆盖的影响.针对铁路隧道这种特殊的受限空间情况首先介绍了电波覆盖的研究方法和现状,然后利用射线追踪方法、波导模式方法和矢量抛物方程方法对电波覆盖进行了预估,针对笔形方向图的特征采用高斯方向图重点研究了不同的天线主瓣宽度、波束指向以及在隧道截面的位置对电波覆盖的影响,分析了沿隧道轴向不同区域内电波覆盖的不同特征,最后研究了受限空间中电波覆盖的三段式模型.本文的方法和模型可以为隧道内的天线选型及优化布局提供理论依据和参考.      

Laser-induced oxidation assisted micro milling of high aspect ratio microgroove on WC-Co cemented carbide

Severe tool wear and poor surface quality are the main problems during micro machining of cemented carbide. In this work, an innovative hybrid process of laser-induced oxidation assisted micro milling (LOMM) was proposed to solve the problems. A nanosecond laser was utilized to induce oxidation of the WC-20%Co material, producing loose oxide which was easy to remove. The micro machinability of the material was improved by laser-induced oxidation. The oxidation mechanisms of cemented carbide were studied. A microgroove with a depth of 2.5 mm and aspect ratio of 5 was fabricated successfully. The milling force, surface quality and tool wear mechanisms were investigated. For comparison, a microgroove was also fabricated with conventional micro milling (COMM) using identical milling parameters. Results revealed that in LOMM the milling force and tool wear rate were extremely low during removing the oxide. The machined surface quality and dimensional accuracy achieved by LOMM were superior to those obtained by COMM. The surface roughness S_a of the microgroove bottom reached 88 nm in LOMM, while the cross-sectional geometry of the microgroove was a trapezoid. Perpendicularity of the microgroove sidewall machined by LOMM was better than that by COMM. The tool wear forms in LOMM were coating spalling and slight tool nose breakage. Compared with COMM, the tool life in LOMM was prolonged significantly. It indicates that the proposed hybrid process is an effective and efficient way to fabricate high aspect ratio micro-features with high dimensional accuracy.     

一种星间设备系统偏差的标定方法

针对Ka波段测距体制中星间测距设备系统偏差标定困难从而影响自主导航精度的问题,提出用星地无线电双向时间比对的方法标定星间设备系统偏差。通过两条星地双向链路并在这两颗卫星间建立一条星间双向链路进行标定。结果表明：该方法能够标定星间设备系统偏差,其RMS优于1ns,从而起到提高星间时间同步精度的目的。     

Assessment of precision in ionospheric electron density profiles retrieved by GPS radio occultations

The Constellation Observing System for Meteorology Ionosphere and Climate (COSMIC) is a six satellite radio occultation mission that was launched in April 2006. The close proximity of these satellites during some months after launch provides a unique opportunity to evaluate the precision of Global Positioning System (GPS) radio occultation (RO) retrievals of ionospheric electron density from nearly collocated and simultaneous observations. RO data from 30 consecutive days during July and August 2006 are divided into ten groups in terms of daytime or nighttime and latitude. In all cases, the best precision values (about 1%) are found at the F peak height and they slightly degrade upwards. For all daytime groups, it is seen that electron density profiles above about 120 km height exhibit a substantial improvement in precision. Nighttime groups are rather diverse: in particular, the precision becomes better than 10% above different levels between 120 and 200 km height. Our overall results show that up to 100–200 km (depending on each group), the uncertainty associated with the precision is in the order of the measured electron density values. Even worse, the retrieved values tend sometimes to be negative. Although we cannot rely directly on electron density values at these altitudes, the shape of the profiles could be indicative of some ionospheric features (e.g. waves and sporadic E layers). Above 200 km, the profiles of precision are qualitatively quite independent from daytime or latitude. From all the nearly collocated pairs studied, only 49 exhibited a difference between line of sight angles of both RO at the F peak height larger than 10°. After analyzing them we find no clear indications of a significant representativeness error in electron density profiles due to the spherical assumption above 120 km height. Differences in precision between setting and rising GPS RO may be attributed to the modification of the processing algorithms applied to rising cases during the initial period of the COSMIC mission.     

Atmosphere sounding by GPS radio occultation: First results from TanDEM-X and comparison with TerraSAR-X

On 21 June 2010 the TerraSAR-X satellite was joined by the TanDEM-X satellite. A Global Positioning System (GPS) radio occultation (RO) experiment using the twin satellites has been carried out to estimate the precision of GPS atmospheric soundings. For the Day Of Year (DOY) 330–336, 2011, we analyze phase and amplitude data recorded by GPS receivers separated by a few hundred meters in a low earth orbit and derive collocated atmospheric refractivity profiles. In the altitude range 10–20 km the standard deviation between TerraSAR-X and TanDEM-X refractivity does not exceed 0.15%. The standard deviation is rapidly increasing for lower and higher altitudes; close to the surface and at an altitude of 30 km the standard deviation reaches 0.8% and 0.5%, respectively. Systematic deviations between TerraSAR-X and TanDEM-X refractivity in the considered altitude range (0–30 km) are negligible. The results confirm the anticipated high precision of the GPS RO technique. However, the difference in the retrieved refractivity in the lower troposphere for different Open Loop (OL) signal tracking parameters, altered onboard TanDEM-X for DOY 49–55, 2012, calls for an in depth analysis. At the moment we can not exclude that a potential bias in the OL Doppler model introduces a bias in our retrieved refractivity at altitudes <8$<8$ km.     

超宽带无线电引信接收机时域建模与仿真

为得到弹目交会过程中超宽带无线电引信接收机的时域输出信号,实现高速交会条件下引信接收机的性能优化,推导了取样积分微分电路的时域数学模型,提出了一种基于无载波信号时域多普勒效应的接收机输出信号时域仿真方法.弹目接近速度对接收机输出信号的影响研究表明,输出信号频率与弹目接近速度成正比;信号幅度与弹目接近速度关系曲线存在速度驻点.选择合理的积分、微分电容可设置恰当的速度驻点,提高引信的抗干扰性能.     

厘米-分米波段Ⅲ型爆发的统计分析

统计分析了太阳第23周期间(2000年7月至2004年9月)在625~1500,MHz,2600~3800,MHz和5200~7600,MHz范围频谱仪观测到的Ⅲ型射电爆发. 给出了Ⅲ型爆发的分布、寿命、频率漂移率、偏振度和频率带宽. 结果显示, 频率漂移率和频率带宽的平均值随频率的增加而增大, 寿命和偏振度的平均值既不是常数也不是在宽频延伸上保持均匀不变的.最多的Ⅲ型爆发分布在625~3800,MHz范围内, 且随频率的增加而增多. 分析表明, 电子加速和能量释放地点主要是在分米波范围内, 这个频率范围的特征可能与分米波段上的磁位形有关, 并且与主耀斑地点附近磁重联区中的电子加速有关. 然而, 还有相当数量的Ⅲ型爆发发生在5200~7600,MHz范围内, 这个特征表明电子加速的地点是在一个日冕的宽范围中. 关于厘米relax-relax 分米波段Ⅲ型爆发的辐射机制最可能包含相干的等离子体辐射或电子回旋脉泽辐射过程.