从日地系统L2出发借力月球飞越近地小行星

对于停留在日地系统L2的“嫦娥2号”探测器,其后续飞行方案有多个选项,例如主动撞月或重返月球轨道、返回地球轨道或再入大气、飞往地月系统L1/L2或日地系统L1、进入深空飞越近地小行星(最终,“嫦娥2号”于2012年12月13日成功地实现了对Toutatis小行星的近距离飞越)。探讨上述的飞行方案需要对飞行轨道进行初步设计,总的速度脉冲限制在100 m/s以内并且需要考虑探测器同时受到太阳、地球、月球的引力作用。本研究设计了探测器从日地系统L2出发借力月球实现Toutatis小行星飞越的飞行方案,与直接飞越方案相比,借力月球可以进一步节省探测器的燃料消耗,其等效速度脉冲设计值为58.47 m/s。     

激光位移传感器高速数据采集与处理系统设计

介绍了基于FPGA和单片机的激光位移传感器高速数据采集与处理系统的工作原理与软硬件设计,该系统采用FPGA作为核心控制器,主要完成A/D转换时钟控制、CCD像点位置提取、数据缓冲异步FIFO三部分功能。单片机负责键控、显示以及系统协调。这种基于FPGA和单片机的同步采集、实时读取采集数据的方案,可以提高系统采集和传输的速度。该硬件电路结构简单、成本低廉、可靠性高、功耗较低,满足了实际应用中的要求。     

CHAMP卫星加速度计标校参数序列的谱分析

给出了利用能量守恒方法求定CHAMP卫星加速度计标校参数的基本原理和算法．对2001年8月-2003年12月共约两年半的CHAMP卫星加速度计数据进行了标校,导出了尺度、偏差和偏差漂移参数的时间序列,分别采用最小二乘谱分析和抗差谱分析对这些时间序列进行了分析．结果表明,尺度、偏差和偏差漂移参数都有明显的周期变化,但各主周期项略有差异．尺度的主周期是441d、220d、126d和13．4d的周期变化,其中220d和441d的周期变化的贡献相对较大．偏差中有明显的220d、126d和13．4d周期变化,各周期变化的贡献几乎相当;偏差漂移的主周期是220d、13．4d和9d的周期变化,其中13．4d的周期变化最为显著,几乎比其他周期项变化高出一个数量级．另外尺度和偏差参数还有明显的长期变化,而偏差漂移参数的长期变化不明显．     

A self-similar solution of a curved shock wave and its time-dependent force variation for a starting flat plate airfoil in supersonic flow

The problem of aeroelasticity and maneuvering of command surface and gust wing interaction involves a starting flow period which can be seen as the flow of an airfoil attaining suddenly an angle of attack. In the linear or nonlinear case, compressive Mach or shock waves are generated on the windward side and expansive Mach or rarefaction waves are generated on the leeward side. On each side, these waves are composed of an oblique steady state wave, a vertically-moving one-dimensional unsteady wave, and a secondary wave resulting from the interaction between the steady and unsteady ones. An analytical solution in the secondary wave has been obtained by Heaslet and Lomax in the linear case, and this linear solution has been borrowed to give an approximate solution by Bai and Wu for the nonlinear case. The structure of the secondary shock wave and the appearance of various force stages are two issues not yet considered in previous studies and has been studied in the present paper. A self-similar solution is obtained for the secondary shock wave, and the reason to have an initial force plateau as observed numerically is identified. Moreover, six theoretical characteristic time scales for pressure load variation are determined which explain the slope changes of the time-dependent force curve.     

Kink mode m = 1 in magnetic tube with discontinuous magnetic field

In this paper, we study conditions of realization and stability of kink modes with azimuthal wave numbers $m=\pm 1$ in cylindrical plasma flex with twisted magnetic field and homogeneous current along its axis. We assume permanent axial magnetic field both inside and outside the flex, surrounded by currentless plasma. Azimuthal magnetic field decreases inversely proportional to the distance from the boundary beyond the flex. We derived dispersion equations for stable and unstable modes in approximation of “thin” plasma flex. The analysis of equations has been provided for the case of discontinuous axial magnetic field on flex’s boundary. Conditions of propagation of wave modes have been defined. It was shown, that unstable modes can be implemented in certain interval of longitudinal wavenumbers. Results can be applied for the interpretation of solar magnetic tubes behavior, using measurements, provided by spacecrafts.     

斜激波总压损失率极小值理论解与物理意义

以法向马赫数作为激波强度表征量,对斜激波关系式进行重新推导,得到了穿过激波总压损失率极小值的理论解。控制方程表达式为激波角对物面角的线性函数。依据斜激波总压损失率极小值解析公式,首先,绘制了针对超声速流总压损失率应用的楔形角-激波角-马赫数的斜激波效率图。其次,通过生成斜激波三维总压损失率等值线图,呈现了总压损失率在楔形角-激波角-特征马赫数空间上的分布规律。此外,利用斜激波效率图,揭示了等总压损失率条件下马赫数与激波角的对称双解现象。     

基于热态叶型的小轮毂比弯掠叶片结构保形设计与优化

发展了一种保持且基于气动设计给定的热态叶型的冷态叶型迭代解算方法,并将其融入叶片罩量调节的优化设计,其中在热态叶型的基础上调节罩量,针对冷态叶型计算变形与应力等,变形后的叶片逼近热态叶型,尽可能减小了对热态叶型气动特性的影响.实现了冷态叶型迭代求解与罩量调节中结构有限元网格的自动更新,并基于iSIGHT优化平台,建立了叶片罩量调节多目标优化设计的自动化分析流程,并以一小轮毂比弯掠风扇叶片罩量调节为例,考查了罩量调节中考虑轮盘与否对优化设计结果的影响.计算分析实例表明:所发展的方法可在保持热态叶型的前提下使叶片最大应力和最大变形分别下降了10.6%和46%.      

一种新型充气式重力梯度杆的研制和在轨展开试验

文章对中国“新技术验证一号”卫星搭载的一种新型充气式重力梯度杆的研制和在轨试验情况进行了介绍。重力梯度杆在小卫星控制领域中具有较好的应用前景,而充气结构具有轻质、占用空间小、发射成本低的特点,采用充气式重力梯度杆可避免传统机械式重力梯度杆质量重、尺寸大和机构复杂的缺点,它以充气伸展臂为主要结构形式,通过充气展开伸直成为重力梯度杆,既作为卫星重力梯度杆又通过在轨试验验证空间充气展开结构的性能。在轨试验结果表明充气式重力梯度杆展开稳定、有序、性能可靠,可以满足小卫星的性能和功能要求。该试验也是中国首个成功的充气展开结构在轨技术验证试验,标志着中国的充气展开结构技术初步具备了工程化能力。     

重力测量卫星KBR系统相位中心在轨标定算法

针对低低跟踪(SST-LL)重力测量卫星K频段测距(KBR)系统相位中心在轨标定问题,提出了一种应用预测卡尔曼滤波算法的KBR系统在轨标定算法。首先,以磁力矩器和姿态控制喷气发动机为执行部件,对一颗卫星施加一定的组合力矩,使其绕另一颗卫星进行周期性姿态机动;然后,将星敏感器数据代入预测卡尔曼滤波算法中估计出卫星姿态;最后,根据KBR系统观测值与卫星姿态角之间的关系,利用扩展卡尔曼滤波算法估计出KBR系统相位中心的位置。数值仿真结果表明:KBR系统相位中心可以被实时估计,当存在较大的卫星姿态动力学模型误差时,KBR系统相位中心的标定误差仍在0.3mrad以内,证明此算法估计精度较高且鲁棒性强。     

Small amplitude ion acoustic solitons in a weakly magnetized plasma with anisotropic ion pressure and kappa distributed electrons

The Zakharov–Kuznetzov (ZK) equation is derived for nonlinear electrostatic waves in a weakly magnetized plasma in the presence of anisotropic ion pressure and superthermal electrons. The anisotropic ion pressure is defined using Chew–Goldberger–Low (CGL) while a generalized Lorentzian (kappa) distribution is assumed for the non-thermal electrons. The standard reductive perturbation method (RPM) is employed to derive the two dimensional ZK equation for the dynamics of obliquely propagating low frequency ion acoustic wave. The influence of spectral index (kappa) of non-thermal electron on the soliton is discussed in the presence of anisotropic ion pressure in plasmas. It is found that ion pressure anisotropy and superthermality of electrons affect both the width and amplitude of the solitary waves. On the other hand the magnetic field is found to alter the dispersive property of the plasma only, and hence the width of the solitons is affected while the amplitude of the solitary waves is independent of external magnetic field. The numerical results are also presented for illustrations.