基于静态输出反馈的大型飞机横航向控制综合

由于广泛采用轻质材料,大型飞机的结构柔性使得控制系统和结构动力学之间存在不可避免的耦合现象,控制器设计必须同时考虑结构柔性对系统反馈的贡献,并满足飞行品质、鲁棒性等目标.提出了一种利用刚体飞行动力学模型和包含弹性模态的高阶模型设计满足多种目标的控制器综合方法,首先由刚体模型设计静态输出反馈参数,满足动态响应、飞行品质和抑制阵风扰动等要求,在此基础上利用已获得的静态反馈参数针对高阶模型设计H_∞回路成形控制器,实现对结构模态的抑制,并满足系统的鲁棒性需求.仿真结果表明:设计方法能够充分利用包含弹性模态的大型飞机飞行动力学模型的特点,满足结构模态抑制和鲁棒稳定裕度等多种需求.      

基于动态逆的空空导弹奇异摄动中制导律

结合奇异摄动和动态逆方法,以飞行时间和末端能量的线性组合为性能指标,推导了一种近最优中制导律.导弹状态方程根据状态变量时间常数写成三时间尺度系统.降阶系统包括纵程、横程和比能动力学方程.用最优控制理论求解出降阶系统最优解,即原系统的外解.动态逆应用于边界层修正,得到一个闭环控制器,其性能可根据爬升、高空等高飞行和下滑阶段或其他情况的不同要求进行调整.仿真结果表明:该制导律满足了对弹道平滑度、飞行时间和末端能量的要求.中段末端航向误差小,为中、末制导的平稳交接班提供了保障.      

Delay Depending Decentralized Adaptive Attitude Synchronization Tracking Control of Spacecraft Formation

This paper deals with the problem of cooperative attitude tracking with time-varying communication delays as well as the delays between inter-synchronization control parts and self-tracking control parts in the spacecraft formation flying. First, we present the attitude synchronization tracking control algorithms and analyze the sufficient delay-dependent stability condition with the choice of a Lyapunov function when the angular velocity can be measured. More specifically, a class of linear filters is developed to derive an output feedback control law without having direct information of the angular velocity, which is significant for practical applications with low-cost configurations of spacecraft. Using a well-chosen Lyapunov-Krasovskii function, it is proven that the presented control law can make the spacecraft formation attitude tracking system synchronous and achieve exponential stability, in the face of model uncertainties, as well as non-uniform time-varying delays in communication links and different control parts. Finally, simulation results are presented to demonstrate the effectiveness of the proposed control schemes.     

Designing method of acceleration and deceleration control schedule for variable cycle engine

Studies show that different geometries of a Variable Cycle Engine (VCE) can be adjusted during the transient stage of the engine operation to improve the engine performance. However, this improvement increases the complexity of the acceleration and deceleration control schedule. In order to resolve this problem, the Transient-state Reverse Method (TRM) is established in the present study based on the Steady-state Reverse Method (SRM) and the Virtual Power Extraction Method (VPEM). The state factors in the component-based engine performance models are replaced by variable geometry parameters to establish the TRM for a double bypass VCE. Obtained results are compared with the conventional component-based model from different aspects, including the accuracy and the convergence rate. The TRM is then employed to optimize the control schedule of a VCE. Obtained results show that the accuracy and the convergence rate of the proposed method are consistent with that of the conventional model. On the other hand, it is found that the new-model-optimized control schedules reduce the acceleration and deceleration time by 45% and 54%, respectively. Meanwhile, the surge margin of compressors, fuel–air ratio and the turbine inlet temperature maintained are within the acceptable criteria. It is concluded that the proposed TRM is a powerful method to design the acceleration and deceleration control schedule of the VCE.     

Wolf–Rayet optically thick winds with Alfvén waves

The Wolf–Rayet (WR) stars are hot luminous objects which are suffering an extreme mass loss via a continuous stellar wind. The high values of mass loss rates and high terminal velocities of the WR stellar winds constitute a challenge to the theories of radiation driven winds. Several authors incorporated magnetic forces to the line driven mechanism in order to explain these characteristics of the wind. Observations indicate that the WR stellar winds may reach, at the photosphere, velocities of the order of the terminal values, which means that an important part of the wind acceleration occurs at the optically thick region. The aim of this study is to analyze a model in which the wind in a WR star begins to be accelerated in the optically thick part of the wind. We used as initial conditions stellar parameters taken from the literature and solved the energy, mass and momentum equations. We demonstrate that the acceleration only by radiative forces is prevented by the general behavior of the opacities. Combining radiative forces plus a flux of Alfvén waves, we found in the simulations a fast drop in the wind density profile which strongly reduces the extension of the optically thick region and the wind becomes optically thin too close its base. The understanding how the WR wind initiate is still an open issue.     

基于遗传算法的弧齿锥齿轮动态特性优化设计

基于集中质量法建立了弧齿锥齿轮八自由度弯-轴-扭三维空间动力学模型,在模型中考虑了啮合刚度的时变性、几何传动误差的非线性、齿面侧隙以及支承刚度的非线性.采用Runge-Kutta法对传动系统动态响应进行求解.在此基础上,以啮合周期内动态特性指标——振动加速度均方根作为优化目标函数,使用遗传算法对局部综合法中的齿面控制参数进行优化.在对设计参数进行优化的同时也获得了齿轮副最优加工参数.最终以齿面修形的方式实现了航空弧齿锥齿轮动态特性优化,减小了齿轮传动系统的振动与噪声.      

气动舵/侧向脉冲推力复合控制导弹最优控制及输出反馈问题研究(英文)

针对气动舵/侧向脉冲推力复合控制导弹,设计了复合控制自动驾驶仪,其包含最优控制器和控制分配两部分。应用最优/经典综合控制法设计的最优控制器用于求解虚拟控制量;控制分配模块将虚拟力矩分配到冗余的作动器上。该复合控制器结构简单,跟踪性能好,具有鲁棒性,并能考虑对作动器的实际约束。基于该复合控制自动驾驶仪,发现采用总加速度为反馈时系统的稳定性和跟踪快速性之间的矛盾严重。为解决这一问题,剔除总加速度中的瞬时影响因素,采用攻角产生的加速度作为反馈,仿真结果表明攻角产生的加速度作为反馈时系统具有更好的快速性。最后针对如何得到合理的加速度反馈进行了简要的讨论,结果表明将总加速度通过低通滤波器后再作为反馈,也可以获得良好的跟踪性能。     

带校正的机电集成超环面传动最优控制

基于某型机电集成超环面传动的机电耦合动力学模型,得到该传动的速度传递函数,推导了加入校正后系统的状态空间表达.考虑该系统的工程实际要求,建立了最优控制理论模型,求得了最优控制律.解得黎卡提矩阵方程,得到反馈增益矩阵,应用Matlab软件对跟踪响应情况和最优控制输入进行了仿真,明显改善了系统的动态性能,实现了比例积分(PI)控制与最优控制的结合.研究结果对该类型传动的实际应用具有指导意义.      

可重复使用运载器的再入制导(英文)

提出了一种针对可重复使用运载器的再入制导算法。算法可分为轨迹规划算法和轨迹跟踪算法。较之经典的规划阻力的航天飞机制导方法,此算法最显著的特点在于轨迹规划与轨迹跟踪都直接在高度-速度空间里进行。在规划算法中,所有的轨道不等约束都可用高度-速度空间里的上下边界来表示,之后基于此边界采用线性化插值的方法来产生标称轨迹族,最后根据末端约束(末端能量管理)和航程约束来选择所需的标称轨迹。跟踪算法则采用反馈线性化来跟踪此标称轨迹进而满足所有的约束条件。此算法另一有别于传统方法的特点在于算法可使用一个航迹角控制器来增加航程,以满足大航程需要。适当地结合规划-跟踪算法和航迹角控制器可给再入制导带来极大的灵活性和适应性。另外,算法对各种建模误差与噪声的鲁棒性经验证也是符合要求的。     

An extrapolation approach for aeroengine’s transient control law design

Transient control law ensures that the aeroengine transits to the command operating state rapidly and reliably. Most of the existing approaches for transient control law design have complicated principle and arithmetic. As a result, those approaches are not convenient for application. This paper proposes an extrapolation approach based on the set-point parameters to construct the transient control law, which has a good practicability. In this approach, the transient main fuel control law for acceleration and deceleration process is designed based on the main fuel flow on steady operating state. In order to analyze the designing feature of the extrapolation approach, the simulation results of several different transient control laws designed by the same approach are compared together. The analysis indicates that the aeroengine has a good performance in the transient process and the designing feature of the extrapolation approach conforms to the elements of the turbofan aeroengine.