提高飞行器升力的若干方法研究

本研究用数值模拟方法研究了四种增升方法。数据模拟的出发方程是可压流的Ｎ－Ｓ方程，格式为Ｂｅａｍ－Ｗａｒｍｉｎｇ格式的改进型。通过上述方法分别研究了：（１）动界效应对提高升力的作用；（２）涡的有利干扰对主升力面的影响；（３）吸气的驻涡增效应；（４）升力面下表面向下喷气的增升作用。研究结果表明，采用上述四种方法可有效地提高飞行器的升力，对改善飞行器的性能有着十分重要的意义。     

Experimental investigation and correlation development of jet impingement heat transfer with two rows of aligned jet holes on an internal surface of a wing leading edge

Extensive experimental studies on the heat transfer characteristics of two rows of aligned jet holes impinging on a concave surface in a wing leading edge were conducted, where50000 Rej 90000, 1.74 H/d 27.5, 66° a 90°, and 13.2 r/d 42.03. The finding was that the heat transfer performance at the jet-impingement stagnation point with two rows of aligned jet holes was the same as that with a single row of jet holes or the middle row of three-row configurations when the circumferential angle of the two jet holes was larger than 30°. The attenuation coefficient distribution of the jet impingement heat transfer in the chordwise direction was so complicated that two zones were divided for a better analysis. It indicated that: the attenuation coefficient curve in the jet impingement zone exhibited an approximate upside-down bell shape with double peaks and a single valley; the attenuation coefficient curve in the non-jet impingement zone was like a half-bell shape, which was similar to that with three rows of aligned jet holes; the factors,including Rej, H/d and r/d, affected the attenuation coefficient value at the valley significantly.When r/d was increased from 30.75 to 42.03, the attenuation rates of attenuation coefficient increased only by 1.8%. Consequently, experimental data-based correlation equations of the Nusselt number for the heat transfer at the jet-impingement stagnation point and the distributionof the attenuation coefficient in the chordwise direction were acquired, which play an important role in designing the wing leading edge anti-icing system with two rows of aligned jet holes.     

WL10型近红外反射式光电传感器的研制

依据光学电子学的相关原理，针对烟草行业自动生产过程中对传感器的需要，研制了ＷＬ１０型近红外反射光电传感器，并成功地应用于烟草行业的生产线上。     

2级脉冲爆震发动机中超声速射流对撞诱导激波聚焦试验研究

为研究2-St age PDE中连续超声速射流及结构参数对撞诱导激波聚焦的影响规律,在冷态条件下开展了2-St age PDE中连续超声速射流对撞诱导激波聚焦的试验。分析了喷口宽度、导流环深度、凹面腔开口端与喷管间距、尾喷管角度、射流入射压力等参数对凹面腔底部峰值压力的影响。结果表明:喷口宽度、导流环深度、凹面腔开口端与喷口间距、射流入射压力越大,凹面腔底部峰值压力越大,激波聚焦效果越好;尾喷管角度越大,凹面腔底部峰值压力越小,激波聚焦效果越差;喷口宽度、导流环深度、射流入射压力对激波聚焦的影响较大。     

基于数值模拟的燃气舵轴向位置优化分析

为了优化燃气舵的安装位置,应用fluent软件对燃气舵三维湍流流场结构进行了分析,在此基础上就燃气舵安装位置对燃气舵流场的影响进行了数值模拟.通过数值模拟得到燃气舵在不同轴向位置、耳片长度和舵偏角下绕流流场的复杂波系结构,绘制了燃气舵在不同舵偏角下升力的变化曲线,给出了燃气舵可以提供的升力参量随舵偏角度变化的规律.通过分析,确定了燃气舵的轴向安装位置,数值模拟和实验结果相符.     

针栓式喷注单元膜束撞击雾化混合过程数值模拟

为了全面认识针栓式喷注器喷雾场结构，基于自适应网格加密技术和分三相计算的PLIC VOF（Piecewise Linear Interface Calculation Volume of Fluid）方法对针栓式喷注单元膜束撞击雾化混合过程进行了仿真分析，通过对两路推进剂分别进行界面追踪，获得了膜束撞击雾化混合过程的详细结构特征，与高速摄影试验结果定性定量对比均吻合较好，验证了数值方法的准确性。以此为基础对膜束撞击的喷雾场结构、撞击变形过程、流场涡结构、雾化破碎典型特征及破碎后的雾化混合分布特征进行了识别分析，结果表明：膜束撞击形成了液束未穿透液膜和液束穿透液膜2种不同的喷雾扇结构。膜束撞击形成的喷雾扇呈"Ω"形，膜束同时发生弯曲变形和横截面变形。另外，膜束撞击同时受到正压和剪切应力作用，导致了一系列复杂涡流现象，使得相互作用增强，雾化混合均增强，这也是膜束撞击喷注构型优于膜膜撞击的本质原因。最后，还发现膜束撞击喷雾场液滴分布呈现分区结构特征，分别是液束控制主导的上雾化区、液膜控制主导的下雾化区及夹在中间的混合区，实际中应兼顾雾化特性和混合特性，选取中等动量比膜束撞击，这可为针栓式喷注器的理论研究和工程设计提供重要参考。     

绕圆头回转体通气空化流型的实验研究

为了深入了解通气空化流动现象,利用高速全流场显示技术,对绕圆头回转体通气空化流型进行实验研究。结果表明,重力效应和通气量对通气空化的多相流流型起主要作用。定义了弗洛德数和通气率两个无量纲数,将绕圆头回转体通气空化分为5种多相流流型,即透明空泡、透明气弹、透明分层、水气混合以及半透明水气混合。流动参数对流型的影响分为2个阶段,即重力起主要作用阶段和重力效应不明显阶段。在重力起主要作用阶段,通气率一定时,随着弗洛德数的增大,附着弹体的空泡倾斜程度变小,弹体上表面的断裂空泡转变为贴着弹体壁面的稳定空泡;弗洛德数一定时,随着通气率的增大弹体上表面断裂空泡的尺度不断增大。在重力效应不明显阶段,通气率一定时,随着弗洛德数的增大,雷诺数变大,流场的湍流强度增大,空泡尾流区域水气交换的程度加剧;弗洛德数一定时,随着通气率的增大,通气空化数减小,绕弹体的云雾状空泡逐渐转变为透明空泡。最后,进一步分析了重力影响下透明空泡脱落的非定常过程,以及反向射流作用下云雾状空泡交替脱落的非定常过程。     

翼型尾缘低频大功率合成射流的动态载荷特性研究——B：动态气动载荷特性分析

针对NACA0015翼型,设计了适用于风洞研究的尾缘低频大功率合成射流致动器,对翼型尾缘合成射流作用下的非定常气动特性进行了风洞实验研究。研究表明：尾缘合成射流与横流的相互作用能够有效改变作用在翼型上的气动载荷;单侧喷口喷/吸时,喷冲程气动力系数响应幅值约为吸冲程幅值的3倍;双侧喷口同时工作时,升力和力矩系数的幅值并不是单侧喷口单独工作时喷气幅值的简单叠加,而是处于单侧喷气幅值和喷吸幅值和之间;升力和力矩响应的幅值与喷流动量系数的平方根之间存在近似的线性关系;在动量系数不变时,升力和力矩系数响应的幅值会随减缩频率的增加而减小;给定合成射流器行程,升力和力矩响应幅值与合成射流频率之间近似呈线性关系。     

自由射流中飞机进气道前方亚声速流场数值仿真研究

为了预测航空发动机高空模拟自由射流试验中飞机进气道-发动机组合体前方的亚声速流场特性,优化试验舱的气动设计,采用 CFD 方法在亚声速自由射流和真实大气飞行条件下对某战斗机进气道的外流场进行数值模拟。分析了进气道对前方气流压缩作用与飞行马赫数关系,对比和分析了分别在自由射流与真实大气中进气道前和进气道入口处的马赫数分布,确定了3种马赫数下进气道在自由射流中的最佳安装位置。比较发现,亚声速自由射流对真实高空大气飞行进行模拟,可以得到马赫数相似的流场。     

Parametric analyses for synthetic jet control on separation and stall over rotor airfoil

Numerical simulations are performed to investigate the effects of synthetic jet control on separation and stall over rotor airfoils. The preconditioned and unsteady Reynolds-averaged Navier–Stokes equations coupled with a k x shear stream transport turbulence model are employed to accomplish the flowfield simulation of rotor airfoils under jet control. Additionally,a velocity boundary condition modeled by a sinusoidal function is developed to fulfill the perturbation effect of periodic jets. The validity of the present CFD procedure is evaluated by the simulated results of an isolated synthetic jet and the jet control case for airfoil NACA0015. Then, parametric analyses are conducted specifically for an OA213 rotor airfoil to investigate the effects of jet parameters(forcing frequency, jet location and momentum coefficient, jet direction, and distribution of jet arrays) on the control effect of the aerodynamic characteristics of a rotor airfoil. Preliminary results indicate that the efficiency of jet control can be improved with specific frequencies(the best lift-drag ratio at F+= 2.0) and jet angles(40 or 75) when the jets are located near the separation point of the rotor airfoil. Furthermore, as a result of a suitable combination of jet arrays, the lift coefficient of the airfoil can be improved by nearly 100%, and the corresponding drag coefficient decreased by26.5% in comparison with the single point control case.