Analyses toward factors influencing sealing clearance of a metal rubber seal and derivation of a calculation formula

Sealing clearance is a key factor for a metal rubber seal’s sealability. The expansion coef-ficient and expansion deformation in the radial direction of metal rubber have been obtained through a thermal expansion experiment of metal rubber. The influence of the elastic modulus to the sealing clearance has been analyzed theoretically. By combining the temperature and elasticity factors of metal rubber with the elastic mechanics theory, the calculation formula of the sealing clearance has been derived, and the values of the sealing clearance and the leakage rate in certain working conditions have been calculated. Experimental results are consistent with calculation results in a high degree. The calculation formula of the sealing clearance can explain the influences of the temperature and elastic modulus factors of metal rubber on the sealing clearance. It can pro-vide guidance for the study of sealing mechanism of metal rubber seals.     

一种扩展的比例导引规律及其弹道方程的构建

在传统的动力学微分方程的基础上提出了一种扩展的比例导引法 ,并给出了该导引规律下的相对弹道方程。文中的推理过程表明 ,这种导引规律对导弹、目标的运动速度几乎没有限制 ,理论上说明运用该制导规律的导弹将能对付高机动大速度目标 ,其弹道方程的建立 ,使得研究该制导规律下的弹道特性成为可能。     

低速高湍流度90°弯管流动数值模拟

分析了曲率对弯曲管道流动的影响 ,给出了曲率修正的双层 k-ε湍流模型 ,并数值模拟了非均匀来流低速高湍流度 90°弯管内流动。文中比较了曲率修正双层 k- ε湍流模型的计算结果与实验结果 ,以及双层 k- ε湍流模型和逆压力梯度修正双层 k- ε湍流模型的计算结果。通过比较 ,发现经过曲率修正后的双层 k- ε湍流模型更好地模拟了非均匀来流低速高湍流度 90°弯管内流动。同时比较了壁面参数的插值方法 ,发现在弯曲管道流动模拟中对壁面参数进行一阶插值比零阶插值能更好地模拟真实流场     

计算大型实对称特征问题的 Lanczos-QR 算法

为了计算大型实对称特征值问题Ｋｘ＝λＭｘ的少数低阶特征值对，本文给出Ｌａｎｃｚｏｓ－ＱＲ迭代方法。首先，给定初始迭代向量ｖ１，作ｍ步Ｌａｎｃｚｏｓ分解：ＫＶｍ＝ＭＶｍＴｍ＋ｈｍｅｍＴ。取Ｔｍ的ｄ个最大特征值为移位量，对Ｔｍ进行ｄ步带原点位移的ＱＲ分解。然后，修改初始迭代向量ｖ１。迭代地重新开始这一过程，迫使初始迭代向量ｖ１进入需求的特征子空间，从而使残量‖Ｋｘ－θＭｘ‖→０。数值例子表明，该方法收敛性强，且稳定、有效。     

On the electrodynamics of counter stream in pulsar’s inner annular cap region

The electric properties of pulsar’s inner annular gap are explored in this paper. Under two main assumptions, (1) the pulsar is alive, (2) the total charge of pulsar should not vary with time, the condition for the acceleration of negative particle in the annular region is derived. The acceleration condition is j₋ ? 0.5j₊, i.e., the current carried by negative particles is greater than or equal to 0.5 times of the current carried by positive particles. This condition holds even when the backward flow of positive particles exists in the annular region. It is noted that the outflow of negative particles offers good opportunities to understand the current closure problem of pulsar as well as wide radiation beam of pulsar observed at high energy band.     

柔性接头角刚度及弹性件剪切应变的精确计算

角刚度（又称弹性比力矩）及弹性件在最大摆角下的剪切应变是固体发动机柔性接头设计的重要指标。在考虑固体火箭发动机柔性接头层弹性件几何尺寸的差异的基础上，推导了角刚度及弹性件剪切应变的精确计算公式。算例表明，该方法计算精度更高。     

Particle Acceleration Mechanisms

In this paper we review the possible mechanisms for production of non-thermal electrons which are responsible for the observed non-thermal radiation in clusters of galaxies. Our primary focus is on non-thermal Bremsstrahlung and inverse Compton scattering, that produce hard X-ray emission. We first give a brief review of acceleration mechanisms and point out that in most astrophysical situations, and in particular for the intracluster medium, shocks, turbulence and plasma waves play a crucial role. We also outline how the effects of the turbulence can be accounted for. Using a generic model for turbulence and acceleration, we then consider two scenarios for production of non-thermal radiation. The first is motivated by the possibility that hard X-ray emission is due to non-thermal Bremsstrahlung by nonrelativistic particles and attempts to produce non-thermal tails by accelerating the electrons from the background plasma with an initial Maxwellian distribution. For acceleration rates smaller than the Coulomb energy loss rate, the effect of energising the plasma is to primarily heat the plasma with little sign of a distinct non-thermal tail. Such tails are discernible only for acceleration rates comparable or larger than the Coulomb loss rate. However, these tails are accompanied by significant heating and they are present for a short time of <10⁶ years, which is also the time that the tail will be thermalised. A longer period of acceleration at such rates will result in a runaway situation with most particles being accelerated to very high energies. These more exact treatments confirm the difficulty with this model, first pointed out by Petrosian (Astrophys. J. 557:560, 2001). Such non-thermal tails, even if possible, can only explain the hard X-ray but not the radio emission which needs GeV or higher energy electrons. For these and for production of hard X-rays by the inverse Compton model, we need the second scenario where there is injection and subsequent acceleration of relativistic electrons. It is shown that a steady state situation, for example arising from secondary electrons produced from cosmic ray proton scattering by background protons, will most likely lead to flatter than required electron spectra or it requires a short escape time of the electrons from the cluster. An episodic injection of relativistic electrons, presumably from galaxies or AGN, and/or episodic generation of turbulence and shocks by mergers can result in an electron spectrum consistent with observations but for only a short period of less than one billion years.     

结合损伤力学与有限元方法预估铆接结构疲劳寿命

利用飞机铆接试验件疲劳试验数据,结合损伤力学与有限元方法,通过MATLAB调用ABAQUS进行损伤演化方程参数的遗传优化反演。将反演得到的损伤演化方程用于飞机结构疲劳寿命预估中,对机翼蒙皮锪窝形式的铆接结构进行了寿命计算和分析,并与试验数据作对比,证明了方法的可行性。     

新型通用飞机机载数据记录仪的研究

分析了国内外通用飞机机载数据记录仪的现状,指出我国现有通用飞机机载数据记录仪所存在的不足之处.同时,根据未来通用飞机的发展,深入研究了新型通用飞机机载数据记录仪的功能、特点需求,并且基于模块化思想,提出了新型通用飞机机载数据记录仪的设计思路,给出了新型通用飞机机载数据记录仪的软硬件体系结构,并对其核心模块的功能进行了详细的阐述.最后,简述了新型通用飞机机载数据记录仪的应用.     

环型与线型聚能装药射流成型机理对比

环型聚能装药药型罩2侧在挤压汇聚形成射流过程中存在不对称性,不能完全套用线型聚能装药射流成型的现有理论。利用DYNA3D软件对相同剖面结构的环型、线型聚能装药射流成型过程进行数值模拟,通过比较分析得出了环型聚能装药形成杵体及射流参数的分布特性,为进一步理论研究及工程应用提供参考。