航天柔性展开结构技术及其应用研究进展

综述了航天柔性展开结构的技术特点及其在航天器中的研究应用情况，围绕航天柔性展开结构应用涉及的薄膜褶皱、充气张力结构的屈曲失稳、展开动力学、精度测试、刚化材料等关键理论和技术基础，评述了航天柔性结构技术应用中的关键问题及未来研究重点，最后给出了航天柔性展开结构技术的未来发展趋势。     

陶瓷CBN砂轮修锐效果的砂轮地貌评价

对磨削性能下降的陶瓷CBN砂轮进行不同程度的修锐,用激光三角法的砂轮地貌测量系统对各状态下砂轮地貌进行测量。得到了砂轮地貌的三维形貌和磨粒出刃高度、磨粒刃密度的变化特点,以此评价修锐效果。结果表明,陶瓷CBN砂轮的修锐对砂轮磨粒的出刃性、等高性和均匀性有很大改善。     

Hierarchical object oriented classification using very high resolution imagery and LIDAR data over urban areas

Urban land cover information extraction is a hot topic within urban studies. Heterogeneous spectra of high resolution imagery—caused by the inner complexity of urban areas—make it difficult. In this paper a hierarchical object oriented classification method over an urban area is presented. Combining QuickBird imagery and light detection and ranging (LIDAR) data, nine kinds of land cover objects were extracted. The Spectral Shape Index (SSI) method is used to distinguish water and shadow from black body mask, with 100% classification accuracy for water and 95.56% for shadow. Vegetation was extracted by using a Normalized Difference Vegetation Index (NDVI) image at first, and then a more accurate classification result of shrub and grassland is obtained by integrating the height information from LIDAR data. The classification accuracy of shrub was improved from 85.25% to 92.09% and from 82.86% to 97.06% for grassland. More granularity of this classification can be obtained by using this method. High buildings and low buildings can, for example, be distinguished from the original building class. Road class can also be further classified into roads and crossroads. The comparison of the classification accuracy between this method and the traditional pixel-based method indicates that the total accuracy is improved from 69.12% to 89.40%.     

Lunar geophysical parameters inversion based on gravity/topography admittance and particle swarm optimization

This paper presents a FORTRAN computer program. The program as code will be used for lunar parameter inversions based on gravity/topography admittance. This will be done by assuming that the lunar lithosphere is modeled as a thin elastic spherical shell. The parameters discussed here include; load ratio, crustal thickness, subsurface load depth, crustal density and elastic lithosphere thickness. The admittance of the best-fitting model can be found through automatically adjusting misfits between one theoretical admittance and an observed one. The results in this paper indicate that this research’s theoretical model is reasonable for exploring the best-fitting parameters. In addition, this code is not only able to automatically and simultaneously calculate the global optimum solution of the parameters studied, but also performs well in computational speed. The code can be easily modified to include more parameter inversions; such as the inversion for subsurface density anomaly and the case of considering infilling material in some lunar mare basins.     

火卫二地形地貌探测综述

火卫二（Deimos）是火星自然卫星之一，研究人员利用火星探测器对其地形地貌开展了大量研究。首先对火卫二的基本参数及起源假说进行了介绍，进而全面梳理了与火卫二相关的航天探测活动，重点对地形地貌探测活动进行了详细介绍，并对围绕火卫二地形地貌的研究成果进行了归纳分析，结果表明火卫二表面分布有撞击坑、风化层、明亮的反射物质及块状物，并存在物质移动。最后针对火卫二探测不全面的情况，给出了中国关于火卫二探测的建议。     

基于SAR子孔径图像的浅海水下地形探测

沿海地区水下地形的精确测量是人类开展海洋活动的关键，合成孔径雷达（SAR）为浅海地形的探测提供了一种新的手段，其中TerraSAR-X 的聚束模式以较长的积分时间得到高分辨率的 SAR 数据，从而能较为精确地反演浅海的海底地形。传统 SAR 图像水下地形探测基于波周期不变的假设，这不仅需要已知初始水深求解波周期，还给探测结果带来一定误差。本文提出一种基于子孔径图像的水下地形探测方法，将一景SAR图像分解成多景时间间隔固定的子孔径图像，利用子孔径图像间的时间间隔，求解不断变化的波周期，从而获得更加精确的水下地形。使用在海南蜈支洲岛的 TerraSAR-X 数据验证了此方法的可行性，将此方法反演得到的结果与GEBCO数据进行比较，发现两者吻合较好（MAE为2.8 m，MRE为23.91%），证明了此方法在浅海反演水深的巨大潜力。     

Experimental study of effect of post processing on fracture toughness and fatigue crack growth performance of selective laser melting Ti-6Al-4V

For Ti-6Al-4V, a titanium alloy increasingly used in aerospace structure, selective laser melting (SLM) is an attractive additive manufacturing technology, which is attributed to its complex construction capability with high accuracy and good surface quality. In order to obtain qualified mechanical properties, SLM parameters and post processing should be tailored for diverse service conditions. Fracture toughness and fatigue crack growth (FCG) behavior are critical characteristics for damage tolerance evaluation of such metallic structures, and they are affected by post processing technologies significantly. The objective of this study is to obtain the fracture toughness and fatigue crack growth behavior of Ti-6Al-4V manufactured by SLM, and to evaluate the influence of post-SLM thermomechanical treatment and surface machining. Fracture toughness and FCG tests were performed for SLM Ti-6Al-4V in three types of post processing status: as-built, heat treated and hot isostatically pressed (HIPed), respectively. Specimens with as-built and machined surface were tested. The microstructure and fractography were analyzed as well in order to investigate the relevance among manufacture process, microstructure and mechanical properties. The results demonstrate that as-built SLM Ti-6Al-4V presents poor ductility and FCG behavior due to martensitic microstructure and residual stresses. Both heat treatment and hot isostatic pressing improve the plane-stress fracture toughness and FCG performance considerably, while surface machining shows slight effect.     

Measuring tidal deformations at Europa’s surface

Key information on Europa’s interior can be gained by monitoring tidally-induced surface deformations from orbiting and landed spacecraft. Such observations would provide constraints on the thickness and rheology of Europa’s ice and liquid water layer, being thus an important tool to characterize basic physical properties of the satellite’s putative subsurface water ocean. Focusing on the outer ice-I layer we will present relations between the interior of Europa and key tidal parameters that can be retrieved from an instrument suite monitoring tidally-induced changes of local gravity, tilt, latitude and strain at the surface. A most promising approach would involve laser altimetry and gravitational field observations from an orbiting spacecraft combined with monitoring of tidally-induced gravity and tilt changes at the surface. However, tidal measurements at the surface may be significantly impeded by instrumental drift, instrument coupling to the surface, local sources of noise and the presumably short life-time of the instruments due to the harsh radiation environment.     

双锋角钻头钻削碳纤维增强树脂基复合材料研究

采用双锋角钻头和普通麻花钻对T700碳纤维复合材料(CFRP)进行钻削试验,从钻削轴向力、制孔出口质量和表面粗糙度等方面分析双锋角钻头在不同加工参数下制孔特点,并与普通麻花钻进行对比。试验结果表明:与普通麻花钻对比,双锋角钻头钻削CFRP时钻削轴向力减小约20%,制孔出口质量更好,孔壁的表面粗糙度值减小,体现优异的切削性能更适合CFRP的制孔加工。