GFRP铣槽加工铣削力及表面粗糙度研究

铣槽是复合材料较常用的机械加工形式之一。为研究玻璃纤维增强复合材料(Glass Fiber Reinforced Plastic,GFRP)铣槽加工中各加工参数对铣削力和表面粗糙度的影响,开展了以主轴转速、进给速度和轴向切深为因素的正交试验,研究铣削力和表面粗糙度的变化规律。并用Matlab软件对铣削力和表面粗糙度的试验数据进行回归分析,建立了铣削力和粗糙度的经验公式,最后通过试验验证铣削力和表面粗糙度经验公式的正确性。结果表明:轴向切深对铣削力影响最大,其次是主轴转速,进给速度对铣削力影响最小;主轴转速对粗糙度的影响最大,其次是进给速度,轴向切深对粗糙度的影响最小。试验结果与铣削力、表面粗糙度经验公式算得的数值对比,误差范围都在20%以内。     

航天柔性展开结构技术及其应用研究进展

综述了航天柔性展开结构的技术特点及其在航天器中的研究应用情况，围绕航天柔性展开结构应用涉及的薄膜褶皱、充气张力结构的屈曲失稳、展开动力学、精度测试、刚化材料等关键理论和技术基础，评述了航天柔性结构技术应用中的关键问题及未来研究重点，最后给出了航天柔性展开结构技术的未来发展趋势。     

Hierarchical object oriented classification using very high resolution imagery and LIDAR data over urban areas

Urban land cover information extraction is a hot topic within urban studies. Heterogeneous spectra of high resolution imagery—caused by the inner complexity of urban areas—make it difficult. In this paper a hierarchical object oriented classification method over an urban area is presented. Combining QuickBird imagery and light detection and ranging (LIDAR) data, nine kinds of land cover objects were extracted. The Spectral Shape Index (SSI) method is used to distinguish water and shadow from black body mask, with 100% classification accuracy for water and 95.56% for shadow. Vegetation was extracted by using a Normalized Difference Vegetation Index (NDVI) image at first, and then a more accurate classification result of shrub and grassland is obtained by integrating the height information from LIDAR data. The classification accuracy of shrub was improved from 85.25% to 92.09% and from 82.86% to 97.06% for grassland. More granularity of this classification can be obtained by using this method. High buildings and low buildings can, for example, be distinguished from the original building class. Road class can also be further classified into roads and crossroads. The comparison of the classification accuracy between this method and the traditional pixel-based method indicates that the total accuracy is improved from 69.12% to 89.40%.     

Experimental study of effect of post processing on fracture toughness and fatigue crack growth performance of selective laser melting Ti-6Al-4V

For Ti-6Al-4V, a titanium alloy increasingly used in aerospace structure, selective laser melting (SLM) is an attractive additive manufacturing technology, which is attributed to its complex construction capability with high accuracy and good surface quality. In order to obtain qualified mechanical properties, SLM parameters and post processing should be tailored for diverse service conditions. Fracture toughness and fatigue crack growth (FCG) behavior are critical characteristics for damage tolerance evaluation of such metallic structures, and they are affected by post processing technologies significantly. The objective of this study is to obtain the fracture toughness and fatigue crack growth behavior of Ti-6Al-4V manufactured by SLM, and to evaluate the influence of post-SLM thermomechanical treatment and surface machining. Fracture toughness and FCG tests were performed for SLM Ti-6Al-4V in three types of post processing status: as-built, heat treated and hot isostatically pressed (HIPed), respectively. Specimens with as-built and machined surface were tested. The microstructure and fractography were analyzed as well in order to investigate the relevance among manufacture process, microstructure and mechanical properties. The results demonstrate that as-built SLM Ti-6Al-4V presents poor ductility and FCG behavior due to martensitic microstructure and residual stresses. Both heat treatment and hot isostatic pressing improve the plane-stress fracture toughness and FCG performance considerably, while surface machining shows slight effect.     

Measuring tidal deformations at Europa’s surface

Key information on Europa’s interior can be gained by monitoring tidally-induced surface deformations from orbiting and landed spacecraft. Such observations would provide constraints on the thickness and rheology of Europa’s ice and liquid water layer, being thus an important tool to characterize basic physical properties of the satellite’s putative subsurface water ocean. Focusing on the outer ice-I layer we will present relations between the interior of Europa and key tidal parameters that can be retrieved from an instrument suite monitoring tidally-induced changes of local gravity, tilt, latitude and strain at the surface. A most promising approach would involve laser altimetry and gravitational field observations from an orbiting spacecraft combined with monitoring of tidally-induced gravity and tilt changes at the surface. However, tidal measurements at the surface may be significantly impeded by instrumental drift, instrument coupling to the surface, local sources of noise and the presumably short life-time of the instruments due to the harsh radiation environment.     

双锋角钻头钻削碳纤维增强树脂基复合材料研究

采用双锋角钻头和普通麻花钻对T700碳纤维复合材料(CFRP)进行钻削试验,从钻削轴向力、制孔出口质量和表面粗糙度等方面分析双锋角钻头在不同加工参数下制孔特点,并与普通麻花钻进行对比。试验结果表明:与普通麻花钻对比,双锋角钻头钻削CFRP时钻削轴向力减小约20%,制孔出口质量更好,孔壁的表面粗糙度值减小,体现优异的切削性能更适合CFRP的制孔加工。     

An Adaptive Network-based Fuzzy Inference System for the detection of thermal and TEC anomalies around the time of the Varzeghan,Iran, (Mw = 6.4) earthquake of 11 August 2012

Anomaly detection is extremely important for forecasting the date, location and magnitude of an impending earthquake. In this paper, an Adaptive Network-based Fuzzy Inference System (ANFIS) has been proposed to detect the thermal and Total Electron Content (TEC) anomalies around the time of the Varzeghan, Iran, (M_w = 6.4) earthquake jolted in 11 August 2012 NW Iran. ANFIS is the famous hybrid neuro-fuzzy network for modeling the non-linear complex systems. In this study, also the detected thermal and TEC anomalies using the proposed method are compared to the results dealing with the observed anomalies by applying the classical and intelligent methods including Interquartile, Auto-Regressive Integrated Moving Average (ARIMA), Artificial Neural Network (ANN) and Support Vector Machine (SVM) methods. The duration of the dataset which is comprised from Aqua-MODIS Land Surface Temperature (LST) night-time snapshot images and also Global Ionospheric Maps (GIM), is 62 days. It can be shown that, if the difference between the predicted value using the ANFIS method and the observed value, exceeds the pre-defined threshold value, then the observed precursor value in the absence of non seismic effective parameters could be regarded as precursory anomaly. For two precursors of LST and TEC, the ANFIS method shows very good agreement with the other implemented classical and intelligent methods and this indicates that ANFIS is capable of detecting earthquake anomalies. The applied methods detected anomalous occurrences 1 and 2 days before the earthquake. This paper indicates that the detection of the thermal and TEC anomalies derive their credibility from the overall efficiencies and potentialities of the five integrated methods.     

Fronts and thermohaline structure of the Brazil–Malvinas Confluence System

Fronts and thermohaline structure of the Brazil–Malvinas Confluence System (BMCS) are studied from climatic data, “Marathon Exp. Leg.8, 1984” data, and Sea surface temperature (SST) data base “ds277-Reynolds” (1981–2000). The South Atlantic Central Water (SACW) is divided in two main types: tropical (TW) and subtropical water (ST). Water masses, Fronts, Inter-Frontal and Frontal Zones are analysed and classified: (a) the water masses: Tropical Low-Salinity Water, Tropical Surface Water, Tropical Tropospheric Water, Subtropical Low-Salinity Water, Subtropical Surface Water, Subtropical Tropospheric Water. T,S characteristics of intermediate, deep and bottom water defined by different authors are confirmed and completed; (b) the Inter-Frontal Zones: Tropical/Brazil Current Zone, Subtropical Zone and Subantarctic Zone; (c) the Frontal Zones: Subtropical, Subantarctic and Polar, and (d) the Fronts: Subtropical Front of the Brazil Current, Principal Subtropical Front, North Subtropical Front, Subtropical Surface Front, South Subtropical Front, Subantarctic Surface Front, Subantarctic Front and Polar Front. Several stable T–S relationships are found below the friction layer and at the Fronts. The maximum gradient of the oceanographic characteristics occurs at the Brazil Current Front, which can be any of the subtropical Fronts, depending on season. Minimum mean depth of the pycnocline coincides with the Fronts of the BMCS, indicating the paths of low-salinity shelf waters into the open ocean. In the work it is shown how to recover the horizontal and vertical thermohaline structure of waters from satellite data RSMAS SST.     

添加镍粉和二硼化锆防静电涂层的对比研究

对添加镍粉和二硼化锆涂层的导电性进行了对比试验，讨论了添加型防静电涂层的防静电机理。试验结果表明：添加型防静电涂层导电通路的形成是导电粒子的直接接触和隧道效应综合作用的结果。文中还推导了计算涂层中导电粒子间距的近似公式。