Fluid structure interaction simulation of supersonic parachute inflation by an interface tracking method

An Arbitrary Lagrangian–Eulerian (ALE) approach with interface tracking is developed in this paper to simulate the supersonic parachute inflation. A two-way interaction between a nonlinear finite element method and a finite volume method is accomplished. In order to apply this interface tracking method to problems with instantaneous large deformation and self-contact, a new virtual structure contact method is proposed to leave room for the body-fitted mesh between the contact structural surfaces. In addition, the breakpoint due to the fluid mesh with negative volume is losslessly restarted by the conservative interpolation method. Based on this method, fluid and structural dynamic behaviors of a highly folded disk-gap-band parachute are obtained. Numerical results such as maximum Root Mean Square (RMS) drag, general canopy shape and the smallest canopy projected areas in the terminal descent state are in accordance with the wind tunnel test results. This analysis reveals the inflation law of the disk-gap-band parachute and provides a new numerical method for supersonic parachute design.     

基于分解协调移动极值响应面法的多构件结构动态可靠性分析

多个构件装配而成的复杂结构可靠性分析存在计算流程繁琐、计算效率低的问题。基于极值响应面 法、移动最小二乘法和分解协调的策略,提出分解协调移动极值响应面法(DCMERSM),对考虑流-热-固耦 合作用的航空发动机高压涡轮叶盘径向变形进行动态可靠性分析,通过对比直接模拟和分解协调极值响应面 法(DCERSM),对 DCMERSM 在 建 模 特 性 和 仿 真 性 能 方 面 的 有 效 性 和 适 用 性 进 行 验 证。 结 果 表 明: DCMERSM不仅适用于转子机械动态可靠性分析,同时还可以用于复杂机械多构件结构可靠性分析。     

考虑滑流影响的埋入式进气道气动特性分析与流动控制研究

研究滑流对埋入式进气道性能的影响机理对于发动机的稳定性具有重要意义。针对某型涡桨发动机 滑油散热器进排气道系统,基于 CFD技术建立系统的螺旋桨滑流与滑油散热器内流一体化数值模拟方法,进 行考虑滑流影响的滑油散热系统埋入式进气道气动设计仿真分析;针对埋入式进气道由于吸入边界层低能气 流导致通过散热器流量低的问题,设计4组涡流发生器进行主动流动控制。结果表明:滑流使得进气道中的气 流偏离,难以形成稳定漩涡,容易发生流动分离;而合理设计的涡流发生器可以有效改善埋入式进气道内流场 特性,并使通过散热器的流量提高12%。     

支线飞机替换战略的经济性分析

随着中国城市化进程的发展,西部地区和三四线城市的航空出行需求快速增加。航空公司通常采用干线飞机投入西部航线和三四线城市航空市场,由于客座率不高且航班频次不足,航空公司经济效益不高,西部地区和部分三四线城市的航空出行需求也未得到充分满足。为解决供需矛盾,采用国产某支线飞机替换部分航线经济效益不好的干线飞机虽被提上日程,但是对于替换战略的经济性缺乏定量描述,航空公司始终处于观望状态,进而制约了支线飞机的市场推广。为解决上述问题,构建支线飞机替换战略的经济性模型,随后进行模型验证与仿真分析,比较支线飞机和干线飞机的航段收益,分析所有权模式和关键费用驱动因子对支线飞机运营经济性的影响规律,进而提出支线飞机的优势区域和提升运营经济性的有效措施。     

基于绳系并联机器人支撑系统的SDM动导数试验可行性研究

详细给出了在低速风洞中,采用绳系并联机器人(WDPR)支撑模型,用强迫振荡法进行标准动态模型(SDM)动导数试验可行性的研究。试验中将杆式六分量应变天平内置入模型中以测量模型的气动力和气动力矩,建立了适用于绳系并联机器人支撑系统的模型运动控制子系统和数据采集子系统。采用绳拉力作为参考信号,对气动力矩信号与位姿信号进行数据的同步处理,解决了绳系并联机器人支撑系统应用于动导数试验时所测力矩信号与位姿信号之间的相位差确定问题,给出了WDPR支撑下模型动导数的计算方法。整个试验样机置于某开口式低速直流风洞中进行了俯仰、带偏航角的俯仰以及升沉的动导数试验,通过测量和计算得到各动导数。试验结果与参考文献相比较具有合理的一致性。研究结果表明,采用绳系并联机器人支撑模型进行动导数试验是可行的,至少对于SDM是这样的结果;使用一套绳系并联机器人支撑系统,可以完成多套硬式支撑系统才能完成的动导数试验,从而提高试验效率,降低试验成本。     

Numerical Simulation of Rotor Flow Field Based on Overset Grids and Several Spatial and Temporal Discretization Schemes

A numerical method based on solutions of Euler/Navier-Stokes (N-S) equations is developed for calculating the flow field over a rotor in hover. Jameson central scheme, van Leer flux-vector splitting scheme, advection upwind splitting method (AUSM) scheme, upwind AUSM/van Leer scheme, AUSM+ scheme and AUSMDV scheme are implemented for spatial discretization, and van Albada limiter is also applied. For temporal discretization, both explicit Runge-Kutta method and implicit lower-upper symmetric Gauss-Seidel (LU-SGS) method are attempted. Simultaneously, overset grid technique is adopted. In detail, hole-map method is utilized to identify intergrid boundary points (IGBPs). Furthermore, aimed at identification issue of donor elements, inverse-map method is implemented. Eventually, blade surface pressure distributions derived from numerical simulation are validated compared with experimental data, showing that all the schemes mentioned above have the capability to predict the rotor flow field accurately. At the same time, vorticity contours are illustrated for analysis, and other characteristics are also analyzed.     

带移动负载海上浮筒系统运动响应特性初步研究

将某类海上自动作业系统简化为带移动负载的浮筒系统,其中负载简化为外径为180mm、约50kg重的柱型体,浮筒为外径533mm的圆筒;初步设计了浮筒系统的主参数。在此基础上,采用频域数值模拟计算,获得了浮筒自由状态下的固有周期和运动响应传递函数(RAO);再采用时域模拟方法,预报了3级海况下(JONSWAP谱)浮筒系统整体的运动响应特性,给出了运动响应幅值、最小干舷高度等特性参数,可为相关装备设计提供技术参考和借鉴。     

运输机空投货物建模与任务性能影响因素研究

针对当前运输机空投货物模型可拓展性不强的问题,提出了分离体的建模方法。在无需分析货物与飞机整体质心变化的情况下,分别以货物和飞机为对象进行受力分析,推导了货物与飞机之间的相互作用力,建立了更加贴近实际的运输机单件货物空投和连续空投的动力学模型。最后,通过数值仿真,分析了飞行速度和牵引伞牵引比对空投任务性能的影响。结果表明,飞行速度和牵引比越大,飞机在货物干扰作用下的状态变化量越小。     

组合升力体动力学建模与仿真

设计了组合升力体总体布局，提出了新的组合升力体建模思路与方法，建立了完整的组合升力体飞行动力学数值仿真模型。建模时综合考虑了主要气动力部件的建模，详细讨论了旋翼／固定翼过渡飞行模式的建模方法。根据提出的建模方法进行了组合升力体的操纵响应分析，仿真结果证明了建模理论和方法的合理性和有效性。     

Multimodal characteristics of a piezoelectric lead zirconate titanate element impacted with iron particles having velocities above 20 km/s

The responses of a piezoelectric lead zirconate titanate (PZT) element to hypervelocity collisions were experimentally studied. In this study, the particles of masses ranging from 0.3 to 10 fg were made to collide with PZT at velocities between 20 and 96 km/s. The amplitude and the corresponding rise time of the single-pulse output signals that were produced in the piezoelectric PZT element were measured to determine the possible collision states. The results revealed an apparently multimodal output; three classes were assumed to be involved in the pulse formation mechanism. The amplitude and rise time were sensitive to the collision velocity. The multimodal behavior implied that the PZT-based cosmic dust detectors should be calibrated according to the class they belong to.