硅氮烷环体的催化聚合及热解制备Si3 N4 材料

采用甲基氢二氯硅烷的氨解产物硅氮烷环体(MHSZ)为原料,以四丁基氟化铵为催化剂,制备了高分子量的硅氮烷聚合物(PHSZ),结合红外、核磁、凝胶色谱仪和热重分析了反应时间对合成的PHSZ结构、组成、分子量和陶瓷产率的影响。考察了低温氨气,高温N2气氛处理工艺对热解产物结构和组成的影响。结果表明,随着反应时间的延长,PHSZ高聚物的分子量提高,热失重降低;采用该热解方式PHSZ可转化为含碳量仅为0.5wt%的Si3N4材料,热解样品在1 600℃时完全结晶,晶相主要是α-Si3N4。     

双脉冲发动机点火过程三维数值模拟

以喷射棒式双脉冲发动机燃烧室、级间隔离装置和喷管一体化为研究对象,采用数值仿真技术对Ⅱ脉冲点火过程三维流场特性进行分析研究。计算结果表明,点火初期燃气压力波峰超前于火焰峰到达级间隔离装置,并以压强冲击波形式传播,Ⅱ脉冲燃烧室相对高压区位置不断发生改变;级间孔打开过程对药柱末端压强影响较大,但对Ⅱ脉冲燃烧室压强整体上升过程影响较小;级间孔打开后,燃气经级间孔加速后形成高度欠膨胀射流,并在Ⅰ脉冲燃烧室内形成非对称带状低压区;级间孔分布的非对称性,导致压强及温度在发动机燃烧室中呈现显著的三维分布特性;高温区出现在隔板附近,而在装药前端、装药末端及外围级间孔轴线附近出现低温区。     

Global ionospheric scintillations revealed by GPS radio occultation data with FY3C satellite before midnight during the March 2015 storm

Global observations of S4 amplitude scintillation index by the GPS Occultation Sounder (GNOS) on FengYun-3 C (FY3C) satellite reveal global dynamic patterns of a strong pre-midnight scintillations in F-region of the ionosphere during the St. Patrick’s Day geomagnetic super storm of 17–19 March 2015. The observed strong scintillations mainly occurred in the low latitudes, caused by equatorial plasma bubbles. During the main storm phase (March 17), the scintillations were first triggered in the New Zealand sector near 160°E longitudes, extending beyond 40°S dip latitude. They were also enhanced in the Indian sector, but significantly suppressed in East Asia near 120°E longitude and in Africa around 30°E longitude. During the initial recovery phase (March 18–19), the global scintillations were seldom observed in GNOS data. During the later recovery phase (after March 19), the scintillations recovered to the pre-storm level in Indian, African, and American sectors, but not in East Asian and any of Pacific sectors. These results closely correlate with observations of the density depletion structures by the Communication/Navigation Outage Forecasting System (C/NOFS) satellite, and ground-based instruments. Such consistency indicates reliability of our scintillation sensing approach even in a case-by-case comparison study. The prompt penetration electric field and disturbance dynamo electric field are suggested as the main factors that control the enhancement and inhibition of the scintillations during the storm, respectively.     

Early analysis of precise orbit and clock offset determination for the satellites of the global BeiDou-3 system

Eight new-generation BeiDou satellites (BeiDou-3) have been launched into Medium Earth Orbit (MEO), allowing for global coverage since March 2018, and they are equipped with new hydrogen atomic clocks and updated rubidium clocks. Firstly, we analyzed the signals for the carrier-to-noise-density ratio (C/N0) and pseudorange multipath (MP) by using international GNSS (Global Navigation Satellite System) Monitoring and Assessment System (iGMAS) station data, and found that B1C has a lower C/N0, and B2a has the same level of C/N0 as the B1I and B3I signals. For pseudorange multipath, compared with the BeiDou-2 satellites, the obvious systematic variation of MP scatters related to the elevation angle is greatly improved for the BeiDou-3 and BeiDou-3e satellites signals. For the signals of the BeiDou-3 satellites, the order of the Root Mean Square (RMS) values of multipath and noise is B3I?<?B1I?<?B2a?<?B1C. Then, the comparison of the precise orbit determination and clock offset determination for the BeiDou-2, BeiDou-3, and BeiDou-3 experimental (BeiDou-3e) satellites was done by using 10 stations from iGMAS. The 3D precision of the 24?h orbit overlap is 24.55, 25.61, and 23.35?cm for the BeiDou-3, BeiDou-3e, and BeiDou-2 satellites, respectively. BeiDou-3 satellite has a comparable precision to that of the BeiDou-2 satellite. For the precision of clock offset estimation, the Standard Deviation (STD) of the BeiDou-3 MEO satellite is 0.350?ns, which is an improvement of 0.042?ns over that of the BeiDou-2 MEO satellite. The stabilities of the BeiDou-3 and BeiDou-3e onboard clocks are better than those of BeiDou-2 by factors of 2.84 and 1.61 at an averaging time of 1000 and 10,000?s, respectively.     

G-16EP通用航空电瓶充放电及寿命研究

为了对G-16EP型电瓶进行维护和保养，根据电瓶厂家规定和适航规范，总结了该型电瓶的充电和容量测试（放电）方法，指出了影响电瓶寿命的主要因素，为该型号电瓶的维护提供了参考。     

含多部位损伤搭接结构应力强度因子三维有限元分析

应力强度因子(Stress intensity factor,SIF)分析是含多部位损伤(Multiple site damage,MSD)结构剩余强度和裂纹扩展寿命预测的基础和关键。考虑接触与摩擦,建立了含MSD搭接结构的三维有限元模型,研究了不同裂纹长度、铆钉类型以及损伤模式下裂纹尖端SIF分布情况和变化规律。结果表明,搭接件孔边裂纹Ⅰ型SIF起主导作用,Ⅱ型和Ⅲ型SIF可忽略不计。由于次弯曲、铆钉变形和板厚度等因素,SIF在外表面最小,接触面一侧较大,最大值多位于蒙皮内部。MSD会使裂纹间的干涉作用增强,SIF增大,且裂纹间距离越近干涉作用越强。裂纹长度相同时,埋头铆钉的孔边裂纹SIF积分均值大于平头铆钉,且接触面的SIF埋头铆钉大于平头铆钉,外表面则相反。     

航空用铝合金超微结构实验表征

为了使铝合金更好的服役于航空领域,就有必要对其微观结构进行实验表征,从而可以在铝合金微观结构和宏观性能之间搭建桥梁,最终优化铝合金的综合性能。本文介绍了航空用2xxx,6xxx和7xxx系铝合金发展历程以及时效析出过程中的微观结构演变,如Al-Cu合金GP区、Al-Cu-Mg合金GPB区等重要物相的结构特征,以及AlCu-Mg合金S相析出行为等都已得到了透彻的研究;阐述了透射电镜、扫描透射电镜、三维原子探针等技术的结合在Al-Cu-Mg-Ag合金Ω相、Al-Mg-Si-Cu合金β″相的晶体结构及界面结构以及铝合金晶间腐蚀机理等研究上的应用;本小组实现了复杂选区电子衍射谱的快速模拟及标定,并基于会聚束电子衍射实现了对析出相体积分数的精确测量;最后指出,高分辨透射电镜原位加热研究及透射电镜原位力学测试等新技术手段的应用,对深层次研究铝合金相变规律、变形行为具有跨时代意义。     

民航英语特点及翻译策略浅谈

民航英语是专门用途英语的一个分支,民航英语翻译属于应用翻译范畴,应坚持目的性原则。本文从词汇、句法及文体三个层面,分析了民航翻译工作的特点和难点,并结合翻译实践,探讨了翻译方法和翻译策略。     

民用航空发动机型号合格审定方法研究

随着中国民用航空发动机的发展,对其适航取证迫在眉睫,型号合格审定是整个适航审定的基础和核心,对其方法的研究很有应用价值。在《航空器型号合格审定程序》基础上对型号合格审定程序作了较充分地研究,在所获得研究成果基础上以Teamcenter为平台开发了航空发动机适航信息管理系统,该系统可用于对民用航空发动机型号合格审定信息的管理与审定流程的控制,可为更好地管理民用航空发动机适航信息以取得型号合格证提供参考。     

MSG-3在民用航空器维修大纲制定中的应用

国内民用航空器的研发起步较晚,目前投入运行的国产航空器型号种类和数量都不多,航空器制造厂家在制定维修大纲方面的经验较少.本文对国际上通行的MSG-3维修任务分析方法进行研究,首先介绍MSG-3维修任务分析方法产生和发展的历史背景,以及其在国内民机型号中的应用;然后详细叙述MSG-3维修任务分析方法(包括航空器系统、动力装置维修任务的分析方法,结构检查和区域检查任务的分析方法,以及形成维修大纲的流程和维修任务的后期优化);最后通过对航空器型号的审查经验,总结我国民用航空器制造厂家在制定航空器维修大纲时存在的问题和改进方向.