《机械制造技术》课程特点与现场教学

《机械制造技术》课程具有很强的综合性和实践性、教学难度大的特点。教学中要以理论教学和现场教学相结合的方法，以提高教学效率和质量。同时要正确选择课题、设计合适的教学方法是改革现场教学的主要措施。     

A practical nonlinear robust control approach of electro-hydraulic load simulator

This paper studies a nonlinear robust control algorithm of the electro-hydraulic load simulator （EHLS）. The tracking performance of the EHLS is mainly limited by the actuator＇s motion disturbance, flow nonlinearity, and friction, etc. The developed controller is developed based on the nonlinear motion loading model. The problems of the actuator＇s disturbance and flow nonlinearity are considered. To address the friction problem, the friction model of the loading motor is identified experimentally. The friction disturbance is compensated using the obtained friction model. Therefore, this paper considers the main three factors comprehensively. The developed algorithm is easy to apply since the controller can be obtained just with one step back-stepping design. The stability of the developed algorithm is proven via Lyapunov analysis. Both co-simulation and experiments are performed to verify the effectiveness of this method.     

Review on signal-by-wire and power-by-wire actuation for more electric aircraft

The huge and rapid progress in electric drives offers new opportunities to improve the performances of aircraft at all levels:fuel burn,environmental footprint,safety,integration and production,serviceability,and maintainability.Actuation for safety-critical applications like flight-controls,landing gears,and even engines is one of the major consumers of non-propulsive power.Conventional actuation with centralized hydraulic power generation and distribution and control of power by throttling has been well established for decades,but offers a limited potential of evolution.In this context,electric drives become more and more attractive to remove the natural drawbacks of conventional actuation and to offer new opportunities for improving performance.This paper takes the stock,at both the signal and power levels,of the evolution of actuation for safety-critical applications in aerospace.It focuses on the recent advances and the remaining chal lenges to be taken toward full electrical actuation for commercial and military aircraft,helicopters,and launchers.It logically starts by emphasizing the specificity of safety-critical actuation for aero space.The following section addresses in details the evolution of aerospace actuation from mechanically-signaled and hydraulically-supplied to all electric,with special emphasis on research and development programs and on solutions entered into service.Finally,the last section reviews the challenges to be taken to generalize the use of all-electric actuators for future aircraft programs.     

超硬铝合金整体精车加工成型壳体及其轴压稳定性研究

本文首先简要讨论了飞行器壳体采用超硬铝合金材料、整体精车加工成型设计出优点，它对小尺寸再入飞行器设计有重要意义和应用价值。接着对超硬铝合金ＬＣ４整体精车加工成型壳体进行较详细的研究。给出了六个试件的轴压试验结果，并用小样件统计方法进行了统计分析。试验结果表明：与过去试件的试验结果相比，临界应力系数提高近一倍。散布度明显减小。对临界应力系数给出的强度变差系数值和概率下限值可供设计使用。     

考虑流固耦合效应的航空发动机风扇叶片应力数值模拟与试验测量研究

航空发动机风扇转子在高压比、高转速、高负荷的级环境中工作时,存在叶片固体域与流体域之间强烈的耦合作用。针对风扇工作中的流固耦合问题,采用基于流固耦合的数值模拟方法对风扇叶片的结构特性进行模拟,研究考虑流固耦合效应前后叶片结构特性的变化。通过风扇转子加减速试验测量叶片表面测点应力变化,并将数值模拟与试验测量结果进行了对比分析。分析结果表明：考虑流固耦合效应后叶片表面的受力情况变化较大,导致叶片表面的应力与变形分布产生较大的变化;仅考虑离心力作用的计算方法得到的应力值与试验测量值误差最大达到50%,而考虑流固耦合效应的计算值误差在10%左右;考虑叶片流固耦合效应得到的应力分布更满足实际工程应力与强度分析要求。     

液压泵脉动模型的故障诊断方法研究

采用液压泵的脉动参数方法进行故障诊断试验研究,在介绍了必要的数学模型和参数测量原理后,着重定性分析了液压泵游隙故障下泵源脉动参数Ｑｓ,Ｚｓ的变化,并给出了判断此种故障的参考阈值方法,试验表明本方法在液压故障诊断方面具有的应用前景。     

A novel integrated self-powered brake system for more electric aircraft

Traditional hydraulic brake systems require a complex system of pipelines between an aircraft engine driven pump (EDP) and brake actuators, which increases the weight of the aircraft and may even cause serious vibration and leakage problems. In order to improve the reliability and safety of more electric aircraft (MEA), this paper proposes a new integrated self-powered brake system (ISBS) for MEA. It uses a hydraulic pump geared to the main wheel to recover a small part of the kinetic energy of a landing aircraft. The recovered energy then serves as the hydraulic power supply for brake actuators. It does not require additional hydraulic source, thus removing the pipelines between an EDP and brake actuators. In addition, its self-powered characteristic makes it possible to brake as usual even in an emergency situation when the airborne power is lost. This paper introduces the working principle of the ISBS and presents a prototype. The mathematical models of a taxiing aircraft and the ISBS are established. A feedback linearization control algorithm is designed to fulfill the anti-skid control. Simulations are carried out to verify the feasibility of the ISBS, and experiments are conducted on a ground inertia brake test bench. The ISBS presents a good performance and provides a new potential solution in the field of brake systems for MEA.     

星载SAR轨道及姿态误差模型分析

平台轨道及姿态误差模型是星载SAR数据模拟及相应的模拟系统的关键组成部分。简要分析了机载SAR和星载SAR的差异,重点对星载SAR的平台轨道及姿态模型进行了分析,最后对星载SAR回波信号仿真方法进行了分析。     

催化点火气氢气氧推力器试验研究

为探索催化点火气氢气氧推力器的点火规律和相关性能,设计并搭建了1N催化点火气氢气氧推力器试验系统,进行了冷热试试验。试验成功实现了不同工况下的多次催化点火。结果表明:供给氧氢混合比控制在100时,推力器预燃室产生的点火温度为700℃,能够满足燃烧室点火要求;催化剂面积体积比对催化氢氧点火具有决定性影响,采用面积体积比大的催化载体可以实现常温(8℃)下的催化点火;另外,试验中氢氧燃烧产生的高温和试验结束后推力器内残留的液态水也对催化组件提出了一定的耐温性和防水性要求。     

舰载飞行器平台惯导系统传递对准及检验方法研究

针对舰载飞行器平台惯导传递对准问题,建立了速度匹配和"速度+姿态"匹配卡尔曼滤波方程。考虑舰艇的摇摆运动,进行了不同机动方式下舰载飞行器平台惯导传递对准效果数学仿真,并设计了精度实时检验方法。