基于多岛遗传-模拟退火算法的气动外形优化

针对超声速翼型滑翔机的气动外形优化问题,提出了一种多岛遗传算法与模拟退火算法相结合的混合优化算法。首先,通过多岛遗传算法产生一个随机的初始种群,找到全局最优点附近区域的一个次优解;然后,将此次优解作为模拟退火算法的初值启动退火进程,缩小设计空间的范围,找到全局最优解。优化结果表明,所提混合算法可以有效地解决飞行器外形优化问题;在数量巨大的设计空间中,滑翔机的最优气动外形能够以较低的计算资源代价快速得到;双弧形翼型的气动特性较六边形翼型更有优势,叉形尾翼的静稳定性和控制效率高于十字形;优化后的外形极大地增加了滑翔机的滑翔距离。     

一种高灵敏度的电动舵机系统研究

本文研究了一种基于单片机的高灵敏、分体式小型电动舵机系统。首先分析了电动舵机的组成与功能，并分别从舵机结构、控制算法两方面对舵机系统的性能设计进行了分析和阐述。针对舵机高灵敏度的性能要求，对控制算法进行了优化并进行了相应仿真。最后经过试验验证，电动舵机满足了高灵敏度的指标要求，验证了控制算法的正确性。     

基于自适应径向基网络的舰船RCS统计特征识别方法

文章采用舰船RCS频域起伏序列的均值、标准差为识别特征向量,利用提出的基于样本密度的自适应径向基网络,进行舰船分类识别研究。自适应径向基网络采用改进的自适应PSO方法估计样本密度最优邻域半径,实现径向基网络中心的自适应选择。改进的自适应PSO方法采用能反映样本聚类特点的BWP指标为适应度评价函数,采用快慢结合的高斯自适应惯性权重调节策略,提高了最优样本密度邻域半径的搜索速度和精度。实验结果表明,自适应径向基网络能自适应获得径向基网络最优识别率对应的RBF中心及其位置分布,减少了对建模人员经验的依赖,提高了反舰导弹对舰船类型的识别分类能力。     

可拓模式识别算法中经典域的确定方法

可拓模式识别算法是根据各个关联度的对比来识别最终的模式,其中经典域区间的确定有着重要的作用。传统的经典域确定方法是基于数理统计学的,不适用于小样本数据,数据不完全以及数据分布未知等复杂情况。引入Bootstrap算法,并和传统的方法对比,更精确地确定了经典域区间。     

二维复值Ginzburg-Landau方程的一个高阶紧致ADI差分格式

对二维复值金兹堡朗道(Ginzburg-Landau,GL)方程提出一个基于时间分裂的高阶紧致交替方向隐式有限差分格式。本文通过时间分裂法将GL方程分裂成一个非线性子问题及两个线性子问题,对非线性子问题以及其中一个线性子问题均通过精确积分进行计算,并对另一线性子问题构造紧致交替方向隐式差分格式进行数值计算。实际计算中,在每一时间步,利用追赶法求解一族常系数三对角线性代数方程组,从而使得算法既具有较高精度又拥有较快的计算速度。数值实验表明该算法在时间和空间方向分别具有二阶和四阶精度,并模拟了方程的一些动力学行为。     

航空发动机静叶联调机构运动分析及优化

针对航空发动机可调静子叶片联调机构运动关系复杂、优化难度大的问题,研究了一种采用图解法和齐次坐标法结合MATLAB软件推导两级联调机构运动方程,并运用遗传算法对两级机构中的关键构件进行联合优化的方法。运用该方法对指定联调机构的两级曲柄可调端长度、可调端与固定端夹角进行了优化求解。得到了最优解,使得第一级摇臂转动角度是第零级摇臂转动角度的2倍，且第一级摇臂转动角速度也是第零级摇臂转动角速度的2倍。      

Plastic wrinkling prediction in thin-walled part forming process:A review

The precision forming of thin-walled components has been urgently needed in aviation and aerospace field. However, the wrinkling induced by the compressive instability is one of the major defects in thin-walled part forming. The initiation and growth of the wrinkles are interac-tively affected by many factors such as stress states, mechanical properties of the material, geometry of the workpiece and boundary conditions. Especially when the forming process involves compli-cated boundary conditions such as multi-dies constrains, the perturbation of clearances between workpiece and dies and the contact conditions changing in time and space, etc., the predication of the wrinkling is further complicated. In this paper, the current prediction methods were summa-rized including the static equilibrium method, the energy method, the initial imperfection method, the eigenvalue buckling analysis method, the static-implicit finite element method and the dynamic-explicit finite element method. Then, a systematical comparison and summary of these methods in terms of their advantages and limitations are presented. By using a combination of explicit FE method, initial imperfection and energy conservation, a hybrid method is recommended to predict plastic wrinkling in thin-walled part forming. Finally, considering the urgent requirements of com-plex thin-walled structures’ part in aviation and aerospace field, the trends and challenges in wrin-kling prediction under complicated boundary conditions are presented.     

DME Interference mitigation for L-DACS1 based on system identification and sparse representation

L-band digital aeronautical communication system 1 (L-DACS1) is a promising candi-date data-link for future air-ground communication, but it is severely interfered by the pulse pairs (PPs) generated by distance measure equipment. A novel PP mitigation approach is proposed in this paper. Firstly, a deformed PP detection (DPPD) method that combines a filter bank, correlation detection, and rescanning is proposed to detect the deformed PPs (DPPs) which are caused by mul-tiple filters in the receiver. Secondly, a finite impulse response (FIR) model is used to approximate the overall characteristic of filters, and then the waveform of DPP can be acquired by the original waveform of PP and the FIR model. Finally, sparse representation is used to estimate the position and amplitude of each DPP, and then reconstruct each DPP. The reconstructed DPPs will be sub-tracted from the contaminated signal to mitigate interference. Numerical experiments show that the bit error rate performance of our approach is about 5 dB better than that of recent works and is closer to interference-free environment.     

不同迎角下脊形前体绕流数值模拟研究

脊形前体有较强的背风涡流场,不同的前体形状对前体涡流场和气动力有很大的影响。本文针对脊形前体飞行器大迎角湍流大分离流动计算的困难,采用IDDES混合湍流模型,以及与之匹配的非定常算法,研究了不同来流迎角下脊形前体的气动特性,以及背风涡非定常演化、破裂的细致流动结构。选取了不同脊形角,以及不同上、下高宽比的脊形前体进行计算。计算结果表明,在迎角较小时,随着迎角的增大,前体主涡会逐渐增强,在迎角较大时,前体主涡破裂;在相同迎角下,脊形角较小时,前体涡较强,涡升力也更大;对于相同脊形角的前体,当上半截面高宽比较小时,前体主涡强度较大,前体涡破裂临界迎角较小,即会提前破裂。     

基于6σ设计的复合推力高速直升机总体参数多目标优化

针对复合推力高速直升机总体设计阶段总体参数的选择问题,提出一种提高可靠性和鲁棒性的基于6σ设计的改进多目标遗传算法优化方法。采用叶素理论和数值积分的方法分析计算了复合推力高速直升机气动及飞行性能,并以此为基础建立了约束函数和初步目标函数模型;将6σ设计融入改进的多目标遗传算法中,构造最终目标函数;在给定有效载荷设计要求下,对复合推力高速直升机总体参数进行了多目标优化设计。该方法获得了所需的Pareto解,优化后的复合推力高速直升机飞行性能相对原机有了较大改善,算例结果表明该方法有效可行。