基于轮地作用参数和PLSDA方法的月壤力学性能评估

为评估在轨月球车周边环境月壤力学性能,以月球车辙信息、轮上载荷和滑转率作为基本参数,提出了16个二元及三元标识量,结合偏最小二乘判别方法(PLSDA)建立评估月壤力学状态模型。根据容重对模拟月壤力学状态进行分级,分别为松软状态、自然状态和紧实状态。应用轮壤相互作用试验台共采集247组试验数据,每种模拟月壤状态的试验数据按照2:1比例随机划分为校正集样本和预测集样本,最终校正集和预测集样本个数分别为166和81个。考虑到原始数据值相差大和所提出部分标识量包含冗余信息的特点,因此在建立PLSDA模型时,应用均值中心化预处理方法对原始数据进行数据预处理,并优选10个标识量建立识别月壤力学状态的PLSDA模型,对应的校正集的准确率和预测集的准确率分别为90.96%和90.12%。结果表明,应用PLSDA方法并结合月球车的车辙信息、轮上载荷和滑转率以及优选标识量所建立的评估月壤力学状态判别模型,其计算快速准确,可用于月球车在轨评估车轮前方月壤的力学特性和通过性能评估。     

高精度高动态星模拟器研究

给出了高精度高动态星模拟器系统组成和总体结构, 提出一种基于亚像素显示技术提高动态星模拟器星点位置显示精度从而减小星点几何中心与能量中心位置偏差的新方法. 针对动态星模拟器高动态性要求, 提出一种快速精确检索全天球导航星的新方法, 将已知SAO (Smithsonian Astrophysical Observatory) 星表进行分区, 计算当前姿态四元数并分析航天器视轴所在区域, 对于距离视轴较远区域停止搜索和匹配, 很大程度上缩小了导航星搜索范围, 进而缩短了全天球恒星遍历所需时间. 软件测试结果表明, 此快速检索法可使全天球导航星的选取速度提高近10倍.      

Design of Optical and Mechanical Structure for Lunar Simulator Based on Variable Shape and Adjustable Radiance

To simulate the different lunar phases and ensure continuous adjustability of the radiant brightness, a new broad spectrum light and frosted glass were applied and designed in the optical system for lunar simulator with the shapes and radiance being able to be adjusted. According to the engineering demand and index requirements of the optical system, three major design aspects are addressed, including the high reliability and maintainability for broad-spectrum light, heat dissipation in lunar simulator for long working hours, and bearing of the main frame under different working conditions. By designing a reasonable machine structure, and through the structure itself with the matrix arrangement of 48 axial flow fans, an effectively cooling air duct is established. Deformation and temperature were calculated by the finite element software ANSYS. The results showed that the displacement deformation reached 0.33mm and stress deformation reached 0.02MPa at the temperature of 20℃; when the main frame was in the temperature field between 20℃ and 65℃, the maximum displacement deformation reached 13.30mm and maximum stress deformation is 97.90MPa, and the amount of this deformation is very small in considering of the mechanical structure dimensions and weight of the lunar simulator.      

星敏感器光谱探测能力用地面模拟测试系统设计

为实现对星敏感器光谱探测能力的测试和标定, 研制了一套可模拟恒星光谱的地面标定系统, 要求其光谱模拟精度优于10%. 采用光谱分布可控、光强可调的模拟照明系统作为地面标定系统的核心器件来模拟恒星光谱变化, 设计高成像质量准直光学系统使模拟星图成平行光出射, 在光学系统出瞳处产生星图, 完成具有恒星光谱信息的高精度星图模拟. 进而利用Lighttools建立标定系统的光谱仿真模型, 仿真结果表明恒星光谱模拟精度优于10%.      

Influence of lunar topography on simulated surface temperature

The surface temperature of the Moon is one of the essential parameters for the lunar exploration, especially to evaluate the Moon thermophysical features. The distribution of the temperature is heavily influenced by the Moon topography, which, however, is rarely studied in the state-of-art surface temperature models. Therefore, this paper takes the Moon topography into account to improve the surface temperature model, Racca model. The main parameters, such as slopes along the longitude and latitude directions, are estimated with the topography data from Chang’E-1 satellite and the Horn algorithm. Then the effective solar illumination model is then constructed with the slopes and the relative position to the subsolar point. Finally, the temperature distribution over the Moon surface is obtained with the effective illumination model and the improved Racca model. The results indicate that the distribution of the temperature is very sensitive to the fluctuation of the Moon surface. The change of the surface temperature is up to 150 K in some places compared to the result without considering the topography. In addition, the variation of the surface temperature increases with the distance from the subsolar point and the elevation, along both latitude and longitude directions. Furthermore, the simulated surface temperature coincides well with the brightness temperature in 37 GHz observed by the microwave sounder onboard Chang’E-2 satellite. The corresponded emissivity map not only eliminates the influence of the topography, but also hints the inherent properties of the lunar regolith just below the surface. Last but not the least, the distribution of the permanently shadowed regions (PSRs) in the lunar pole area is also evaluated with the simulated surface temperature result.     

多分量雷达辐射源信号的检测与分离

针对多分量雷达辐射源信号难以有效检测与分离的问题,提出了时频变换结合时变滤波的方法。通过图像分割中的区域生长法在时频平面对各分量进行检测,对其中的线性调频分量采用分数阶傅里叶变换进行优先分离,再对时频或频域没有耦合的分量进行滤波,最后通过支持向量机划分分类线,用于时频耦合分量的分离。仿真实验结果表明,该方法可以对多分量信号进行有效的检测与分离。     

某型发动机故障诊断专家系统研究

采用分类建库和精确与模糊相结合的综合推理策略,设计该型发动机故障诊断专家系统;运用知识库与系统分离模式,可以不断丰富知识库的知识,提高诊断准确率。     

军机LRM及其关键技术研究

LRM(外场可更换模块)是第四代军机航电系统的主要特征,对于提高军机战备完好性和降低其全寿命周期费用有着重要意义.分析了航电系统传统结构的不足,指出了基于LRM结构的航电系统的优点,阐述了LRM的设计要求及现有标准,并深入研究了其关键技术,以便为我军新机设计提供参考.     

基于粒子群聚类算法的雷达信号分选

在电子对抗领域,雷达信号分选的研究是一个重要课题。电子战的信号环境日趋复杂,雷达信号的处理面临高密度信号环境,雷达脉冲相互交错。对粒子群聚类算法进行了研究分析,把粒子群聚类算法应用到雷达分选中,仿真实验证明该方法能够得到很好的雷达信号分选效果,为雷达信号分选提供了新思路。