参量型空气折射率传感系统

本系统分别利用传感器测出空气的温度、气压和湿度三个参量,把测量值用一个通用于不同机型的接口电路连接到微机进行数据处理并计算出空气折射率值。文中叙述了传感器及其检测电路的设计原理,给出了检测和接口电路框图、计算公式和程序流程图。整个系统已通过联机调试和初步的对比试验。     

MATLAB在飞机环境控制系统仿真中的应用

介绍了在MATLAB环境下,对飞机环境控制系统的建模方法,开发了飞机环控系统综合仿真的MATLAB工具箱.简单介绍了所开发的仿真工具箱,并且用此工具箱对某型飞机的环控系统进行了仿真研究,与实验结果的对比表明,所开发的工具箱,具有很高的仿真精度.     

系列化构型运载能力设计余量留取方法研究

调研了美国航天型号研制中设计余量留取的情况,结合系列化构型论证工作,对运载能力设计余量留取问题进行了初步研究,分析了关键参数对运载能力的影响,针对不同目标轨道、系列化构型的差异,探索得到了运载能力设计余量差异化留取的方法。     

Thermal-structural analysis of regenerativelycooled thrust chamber wall in reusable LOX/Methane rocket engines

To predict the thermal and structural responses of the thrust chamber wall under cyclic work,a 3-D fluid-structural coupling computational methodology is developed.The thermal and mechanical loads are determined by a validated 3-D finite volume fluid-thermal coupling computational method.With the specified loads,the nonlinear thermal-structural finite element analysis is applied to obtaining the 3-D thermal and structural responses.The Chaboche nonlinear kinematic hardening model calibrated by experimental data is adopted to predict the cyclic plastic behavior of the inner wall.The methodology is further applied to the thrust chamber of LOX/Methane rocket engines.The results show that both the maximum temperature at hot run phase and the maximum circumferential residual strain of the inner wall appear at the convergent part of the chamber.Struc tural analysis for multiple work cycles reveals that the failure of the inner wall may be controlled by the low-cycle fatigue when the Chaboche model parameter γ3 =0,and the damage caused by the thermal-mechanical ratcheting of the inner wall cannot be ignored when γ3 ＞ 0.The results of sen sitivity analysis indicate that mechanical loads have a strong influence on the strains in the inner wall.     

端壁合成射流对高负荷扩压叶栅损失特性的影响

利用端壁合成射流技术对高负荷扩压叶栅内的流动分离控制展开数值研究,探讨其改善损失的作用机理及影响因素。研究结果表明,端壁合成射流可以显著提升叶栅气动性能,使总压损失最大降低21.63%,静压升提高5.60%。射流形成的流向射流旋涡通过上洗/下洗作用促进了端壁附面层与主流高速流体间的动量交换,阻碍了通道涡向叶展中部的迁移、削弱其展向影响范围,并通过流向动量注入效应增大了激励缝下游流体的能量,从而推迟流动分离、降低叶栅损失。激励位置和射流角度是影响端壁合成射流作用效果的重要参数,当激励位于角区分离线上游附近且射流角度较小时,流动控制效果最佳。此外,提高射流动量也有助于增强其控制流动分离的能力。     

视觉测振技术在柔性太阳翼模态试验中的应用

针对8 m×5 m的柔性太阳翼在倒立状态下进行模态试验，设计数字摄像视觉测振系统，基于图像特征跟踪法实现了从相机标定、图像采集、信息提取到三维振动数据获取的过程，通过工况模态辨识方法获取了柔性太阳翼模态频率及振型等动力学参数。并考虑空气和重力影响建立太阳翼有限元模型，通过与基于基恩士激光位移传感器的传统模态试验结果及仿真分析结果进行对比，验证了基于视觉测振工况模态试验方法的准确性，为柔性太阳翼在轨模态辨识奠定基础。     

机械球磨法制备纳米TATB及其表征

采用高能机械球磨法制备出平均粒径为58.1 nm的纳米TATB。利用SEM分析表征了纳米TATB的微观形貌,并统计了纳米TATB的粒度分布。利用XRD、IR和XPS表征了纳米TATB的晶型、分子结构和表面元素等。采用DSC和DSC-IR联用系统对纳米TATB的热分解活化能和热分解产物进行了分析。结果表明,纳米TATB的表观热分解活化能(ES=341.2 k J/mol)相比原料TATB(ES=354.4 k J/mol)降低了13.2 k J/mol,说明纳米TATB的反应活性更高。纳米TATB的主要分解产物为CO_2,同时伴有一定量的N_2O和NO_2生成。热感度实验表明,纳米TATB的5 s爆发点(T5s)高于原料TATB的T5s,说明纳米TATB的热稳定性更高。     

Low-latitude storm time ionospheric predictions using support vector machines

The electromagnetic drift plays an important role in low-latitude storm time ionospheric dynamics. In this study we attempt to utilize the electric field data into ionospheric predictions by using support vector machine (SVM), a promising algorithm for small-sample nonlinear regressions. Taking the disturbance electric field data as input, different SVMs have been trained for three seasonal bins at two stations near the north crest of the Equatorial Ionization Anomaly (EIA). Eighteen storm events are used to check out their predicting abilities. The results show fairly good agreement between the predictions and observations. Compared with STORM, a widely used empirical correlation model, the SVM method brings a relative improvement of 23% for these testing events. Based on this study we argue that the SVM method can improve the storm time ionospheric predictions.     

Influence of TiB2 particles on machinability and machining parameter optimization of TiB2/Al MMCs

In situ formed TiB₂ particle reinforced aluminum matrix composites (TiB₂/Al MMCs) have some extraordinary properties which make them be a promising material for high performance aero-engine blade. Due to the influence of TiB₂ particles, the machinability is still a problem which restricts the application of TiB₂/Al MMCs. In order to meet the industrial requirements, the influence of TiB₂ particles on the machinability of TiB₂/Al MMCs was investigated experimentally. Moreover, the optimal machining conditions for this kind of MMCs were investigated in this study. The major conclusions are: (1) the machining force of TiB₂/Al MMCs is bigger than that of non-reinforced alloy and mainly controlled by feed rate; (2) the residual stress of TiB₂/Al MMCs is compressive while that of non-reinforced alloy is nearly neutral; (3) the surface roughness of TiB₂/Al MMCs is smaller than that of non-reinforced alloy under the same cutting speed, but reverse result was observed when the feed rate increased; (4) a multi-objective optimization model for surface roughness and material removal rate (MRR) was established, and a set of optimal parameter combinations of the machining was obtained. The results show a great difference from SiC particle reinforced MMCs and provide a useful guide for a better control of machining process of this material.     

联立法求解月面上升段最优轨迹的快速收敛控制技术

为了更好地解决复杂约束下的航天器月面上升段在线轨迹规划问题,提出了一种求解最优轨迹的联立框架。首先利用有限元正交配置法将状态变量和控制变量完全离散化,得到一个非线性规划命题。考虑到命题中含有较多的不等式约束并且会随着有限元的增加而增加,故采用内点算法对非线性规划命题进行求解。离散化后的非线性规划命题的规模大幅度增加,导致了优化计算难度的加大和求解时间的增加,为了便于联立法的在线应用,采用收敛深度控制策略从平衡解的精度和计算效率的角度来改进优化算法的实时性。以某航天器载人返回任务月面上升段场景为算例进行仿真,结果表明基于联立法求得的最优控制量序列得到的飞行轨迹满足轨道根数的精度要求,同时利用收敛深度控制策略可以实现快速收敛控制。