一种语音信号欠定盲分离的新方法

文章提出了一种语音信号欠定盲分离的新方法,引入了一种伪提取矢量的概念,并通过在信号采样点处选取对应的伪提取矢量,以恢复取值占优的源信号采样点的值,来实现欠定盲源分离。通过将该方法与传统的基于线性规划的欠定盲源分离方法分别仿真表明:文章所提出方法由于在信号的各采样点处无需优化,因此大大提高了信号分离的速度,语音信号的分离速度比基于线性规划的方法快数倍。     

Experimental investigation and correlation development of jet impingement heat transfer with two rows of aligned jet holes on an internal surface of a wing leading edge

Extensive experimental studies on the heat transfer characteristics of two rows of aligned jet holes impinging on a concave surface in a wing leading edge were conducted, where50000 Rej 90000, 1.74 H/d 27.5, 66° a 90°, and 13.2 r/d 42.03. The finding was that the heat transfer performance at the jet-impingement stagnation point with two rows of aligned jet holes was the same as that with a single row of jet holes or the middle row of three-row configurations when the circumferential angle of the two jet holes was larger than 30°. The attenuation coefficient distribution of the jet impingement heat transfer in the chordwise direction was so complicated that two zones were divided for a better analysis. It indicated that: the attenuation coefficient curve in the jet impingement zone exhibited an approximate upside-down bell shape with double peaks and a single valley; the attenuation coefficient curve in the non-jet impingement zone was like a half-bell shape, which was similar to that with three rows of aligned jet holes; the factors,including Rej, H/d and r/d, affected the attenuation coefficient value at the valley significantly.When r/d was increased from 30.75 to 42.03, the attenuation rates of attenuation coefficient increased only by 1.8%. Consequently, experimental data-based correlation equations of the Nusselt number for the heat transfer at the jet-impingement stagnation point and the distributionof the attenuation coefficient in the chordwise direction were acquired, which play an important role in designing the wing leading edge anti-icing system with two rows of aligned jet holes.     

脉冲调制光热辐射测量的分层模型与计算

给出了脉冲调制光热辐射中温度场分布的数值模拟结果，建立了分层介质的三维热扩散模分析了层深度、大小等信息与温度场的关系，并将计算结果同扫描式测量的实际测量结果相比较，两者符合良好。     

基于莫尔条纹测量法设计的船体变形测量系统

介绍了一种基于莫尔条纹测量法设计的船体变形测量系统,分析了测量精度,并通过模拟实验证明了其可行性。     

精益研发VS精益生产

雨疏风骤之后,是海棠依旧,还是绿肥红瘦?词人李清照关心风雨之后的海棠时问了这个问题。当关注信息化时代的精益策略时,我不禁也想问这个问题。丰田生产模式1990年被美国麻省理工学院的教授总结为精益生     

Excel在真空计量中的应用

在真空计量领域中，Ｅｘｃｅｌ电子表格软件得到了广泛的应用。本文举例说明了Ｅｘｃｅｌ的数据计算，统计分析，回归分析，宏、ＯＬＥ和ＤＤＥ功能。     

多功能信号发生器的设计与制作

仪器由AT89C55单片机进行控制,通过键盘、LCD显示模块进行人机对话,完成波形选择、频段选择,频率、幅度输出控制。由MAX038产生正弦波、方波、三角波,其波形选择由单片机进行控制;频段选择由五档组成,可通过旋扭开关完成;频率由单片机输出数据经D/A转换后控制MAX038;幅度由单片机输出数据经D/A转换后改变放大器负反馈深度来实现输出信号幅度的变化。     

双后掠乘波体设计及性能优势分析

根据密切锥乘波体的设计几何关系,提出双后掠乘波体概念,给出了双后掠乘波体设计的参数与生成乘波体外形之间的关系。使用非均匀有理B样条(NURBS)表达包括圆和直线的激波出口型线辅助设计,研究了钝头区域可控、后掠区域可控的乘波体外形设计方法。使用CFD数值计算方法验证了设计方法的有效性,同时研究了双后掠乘波体外形的性能优势,结果表明在保持高超声速高性能的基础上适当设计外形在低速状态、纵向稳定性和涡效应增升方面具有性能优势,为大空域宽速域高超声速飞行器的研制开拓了新的途径。     

Determination of optimal samples for robot calibration based on error similarity

Industrial robots are used for automatic drilling and riveting.The absolute position accuracy of an industrial robot is one of the key performance indexes in aircraft assembly,and can be improved through error compensation to meet aircraft assembly requirements.The achievable accuracy and the difficulty of accuracy compensation implementation are closely related to the choice of sampling points.Therefore,based on the error similarity error compensation method,a method for choosing sampling points on a uniform grid is proposed.A simulation is conducted to analyze the influence of the sample point locations on error compensation.In addition,the grid steps of the sampling points are optimized using a statistical analysis method.The method is used to generate grids and optimize the grid steps of a Kuka KR-210 robot.The experimental results show that the method for planning sampling data can be used to effectively optimize the sampling grid.After error compensation,the position accuracy of the robot meets the position accuracy requirements.     

空间机械制冷机微振动研究

机械制冷机广泛应用于空间红外遥感器中,由于其中存在运动部件,因此工作过程中不可避免地会产生振动,是卫星在轨状态下影响光学遥感器成像品质的重要振动源之一。文章对空间机械制冷机的微振动问题进行了研究,建立了线性驱动对称布置压缩机以及斯特林膨胀机的力学简化模型;分析了2个对置活塞的质量、阻尼、刚度偏差与压缩机整体的振动输出之间的关系,仿真分析结果表明,压缩机整体的振动输出对阻尼的偏差最为敏感;对3种常用制冷机微振动测量方法进行了介绍,对比了3种方法的优缺点,指出扰振力的测试方法对于空间遥感器领域较为适用。