翼型边界层及近场尾流的湍流特性与气动噪声特性相关规律试验研究

变湍流度试验结果表明 ,湍流度对翼型边界层和尾流的湍流特性、转捩情况、气动噪声特性及其它们间的相关特性有显著影响。这种影响有一定规律。笔者得出了苦干有价值的半经验关系式。     

Global aerodynamic design optimization based on data dimensionality reduction

In aerodynamic optimization, global optimization methods such as genetic algorithms are preferred in many cases because of their advantage on reaching global optimum. However, for complex problems in which large number of design variables are needed, the computational cost becomes prohibitive, and thus original global optimization strategies are required. To address this need, data dimensionality reduction method is combined with global optimization methods, thus forming a new global optimization system, aiming to improve the efficiency of conventional global optimization. The new optimization system involves applying Proper Orthogonal Decomposition (POD) in dimensionality reduction of design space while maintaining the generality of original design space. Besides, an acceleration approach for samples calculation in surrogate modeling is applied to reduce the computational time while providing sufficient accuracy. The optimizations of a transonic airfoil RAE2822 and the transonic wing ONERA M6 are performed to demonstrate the effectiveness of the proposed new optimization system. In both cases, we manage to reduce the number of design variables from 20 to 10 and from 42 to 20 respectively. The new design optimization system converges faster and it takes 1/3 of the total time of traditional optimization to converge to a better design, thus significantly reducing the overall optimization time and improving the efficiency of conventional global design optimization method.     

一种语音信号欠定盲分离的新方法

文章提出了一种语音信号欠定盲分离的新方法,引入了一种伪提取矢量的概念,并通过在信号采样点处选取对应的伪提取矢量,以恢复取值占优的源信号采样点的值,来实现欠定盲源分离。通过将该方法与传统的基于线性规划的欠定盲源分离方法分别仿真表明:文章所提出方法由于在信号的各采样点处无需优化,因此大大提高了信号分离的速度,语音信号的分离速度比基于线性规划的方法快数倍。     

Experimental investigation and correlation development of jet impingement heat transfer with two rows of aligned jet holes on an internal surface of a wing leading edge

Extensive experimental studies on the heat transfer characteristics of two rows of aligned jet holes impinging on a concave surface in a wing leading edge were conducted, where50000 Rej 90000, 1.74 H/d 27.5, 66° a 90°, and 13.2 r/d 42.03. The finding was that the heat transfer performance at the jet-impingement stagnation point with two rows of aligned jet holes was the same as that with a single row of jet holes or the middle row of three-row configurations when the circumferential angle of the two jet holes was larger than 30°. The attenuation coefficient distribution of the jet impingement heat transfer in the chordwise direction was so complicated that two zones were divided for a better analysis. It indicated that: the attenuation coefficient curve in the jet impingement zone exhibited an approximate upside-down bell shape with double peaks and a single valley; the attenuation coefficient curve in the non-jet impingement zone was like a half-bell shape, which was similar to that with three rows of aligned jet holes; the factors,including Rej, H/d and r/d, affected the attenuation coefficient value at the valley significantly.When r/d was increased from 30.75 to 42.03, the attenuation rates of attenuation coefficient increased only by 1.8%. Consequently, experimental data-based correlation equations of the Nusselt number for the heat transfer at the jet-impingement stagnation point and the distributionof the attenuation coefficient in the chordwise direction were acquired, which play an important role in designing the wing leading edge anti-icing system with two rows of aligned jet holes.     

基于莫尔条纹测量法设计的船体变形测量系统

介绍了一种基于莫尔条纹测量法设计的船体变形测量系统,分析了测量精度,并通过模拟实验证明了其可行性。     

多功能信号发生器的设计与制作

仪器由AT89C55单片机进行控制,通过键盘、LCD显示模块进行人机对话,完成波形选择、频段选择,频率、幅度输出控制。由MAX038产生正弦波、方波、三角波,其波形选择由单片机进行控制;频段选择由五档组成,可通过旋扭开关完成;频率由单片机输出数据经D/A转换后控制MAX038;幅度由单片机输出数据经D/A转换后改变放大器负反馈深度来实现输出信号幅度的变化。     

空间机械制冷机微振动研究

机械制冷机广泛应用于空间红外遥感器中,由于其中存在运动部件,因此工作过程中不可避免地会产生振动,是卫星在轨状态下影响光学遥感器成像品质的重要振动源之一。文章对空间机械制冷机的微振动问题进行了研究,建立了线性驱动对称布置压缩机以及斯特林膨胀机的力学简化模型;分析了2个对置活塞的质量、阻尼、刚度偏差与压缩机整体的振动输出之间的关系,仿真分析结果表明,压缩机整体的振动输出对阻尼的偏差最为敏感;对3种常用制冷机微振动测量方法进行了介绍,对比了3种方法的优缺点,指出扰振力的测试方法对于空间遥感器领域较为适用。     

遥感卫星全视场成像质量仿真方法研究

基于卫星工具包(STK)和MATLAB软件,提出了一种对卫星全视场成像进行物理建模分析的交互仿真方法。以一颗运行在650km高度的太阳同步轨道、具有侧摆能力的遥感卫星为例,对相机在运动中的全视场积分时间偏差和全视场偏流角修正残差进行了仿真分析。仿真结果表明,文章提出的方法能够较精确地对相机在轨全视场的成像质量进行分析,从而可用于在轨成像性能预估。该仿真方法还能以卫星工程数据作为输入,用于卫星星上算法验证、在轨误差分析补偿等方面,为保障卫星在轨成像质量发挥作用。     

一种不依赖剩余时间估计的巡航导弹多约束制导律

针对巡航导弹末段多约束精确打击问题,提出了一种不依赖剩余时间估计的攻击角度/时间制导律。推导了航向弹目相对运动关系,设计了一种基于附加航向角设计的时间约束制导律,通过对时间增益系数的设计和优化,实现附加航向角的调节,可使实际飞行时间向期望时间快速收敛;在此基础上,将角度约束制导律与时间约束制导律相结合,得到了一种角度/时间约束制导律。该制导律不依赖于剩余时间估计,进而实现多约束条件下航向轨迹自适应调整;通过求解偏置导引律闭环轨迹分析得到轨迹收敛条件,给出满足角度/时间约束制导律的显式收敛条件。最后通过数学仿真验证了本文提出的航向多约束制导律可满足时间和角度等多约束条件且具有快速收敛特性。     

连续尺度变换方程在稳态及非稳态流动模拟中的应用

为了提高涡粘性假设的湍流模型对于非稳态流动的求解精度,同时兼顾其对于稳态流动的求解性能,将雷诺应力项与连续变换方程(CSSE)结合而形成新的应力项,使其根据流场尺度、网格尺度及Kolmogorov尺度来自动调节当地的应力雷诺应力模化水平,避免网格因素在流场模拟中产生不利影响,改正了混合RANS/LES方法的速度型偏离对数率问题;同时,该方法并未引入显式亚格子模型(SGS),因此回避了亚格子系数确定对于流场模拟精度产生的影响,改善了湍流模型对于流动不稳定性的辨识精度。在湍流平板算例中,CSSE方法计算的边界层速度型精度与雷诺平均方法(RANS)相当,而对于圆柱尾迹的模拟则证明了CSSE方法具有混合RANS/LES方法的优点,即能够准确模拟流动的不稳定性特征。