磁-光/涡流成像技术的有限元分析

近年来迅速发展的磁－光成像（ＭＯＩ）技术使涡流检测技术得到了新的进展。本文运用磁－光／涡流成像的有限元模型对典型的飞机构件缺陷（如连接飞机表面两个铝层的紧固件下面的裂纹）进行模拟。模拟结果表明，其磁场垂直分量的变化对这种结构来说是相当灵敏的，采用ＭＯＩ技术可以用来探测隐藏在紧固件帽下面的缺陷。     

光学基片表面软质抛光胶体粒子的激光清洗

介绍了光学基片表面软质抛光胶体粒子激光清洗的基本方法、原理和实验装置,并通过对含有污染微粒的基片表面进行激光清洗,获得了高洁净表面的光学基片.     

敏捷制造模式下的质量保证信息系统

客户驱动的动态的全球市场及地理上分布的合作伙伴给开发敏捷制造模式下的质量保证信息系统(QAIS)带来了新的挑战,本文先对敏捷制造模式下的QAIS进行了需求分析,提出了新的分布式QAIS的实现框架,利用当前迅速发展的信息技术,建立了QAIS的开发环境并对有关关键技术进行了初步研究,最后开发完成了一个基于Web的QAIS原型系统.     

Study on Evaluating Arithmetic of Network Solving for Product Conceptual Design

产品概念设计是一种复杂的推理求解过程 ,它的设计过程的推理、判断工作量往往非常巨大 .利用“与 /或”树的知识表达方法 ,对产品概念设计过程的原理解答及其组合原理方案评价进行了深入的研究 ,提出了一种分解 /综合网络评价算法 ,为产品概念设计过程的优化以及设计效率的提高打下良好的基础 ,并为进一步开发智能设计的计算机软件支持工具提供了一种形式化的评价方法 .     

Debut Flight Of LM-3C:Launching Tianlian-1 Successfully

FY-3A,the first satellite of China's new generation of polar-orbiting meteorological satellites,was launched into space atop a modified LM-4C launch vehicle.The satellite separated from the rocket 19 minutes after the takeoff.Flying at an altitude of 807km with an inclination of 98.8 degrees,the satellite circles in polar orbit 14 times everyday,covering the whole globe twice a day. FY-3A has a design lifetime of three years.Weighing 2295kg,the three-axis stabilized satellite is equipped with 11 remote s...     

一种团块位置的提取方法

如何正确提取团块位置以实现自动跟踪对图像理解有重要意义。由于团块在图像中出现频繁且位置不确定，位置提取困难。针对一个二值图像识别系统提出了基于集合变换（即数学形态学和二值有序统计）的团块位置提取方法。即，首先对图像进行二值化，其次对二值化图像进行形态学变换，最后对变换的结果图像进行统计分析，由分析结果得出团块的位置信息。用本方法对地图中九种团块线型作了实验，表明该方法运算简单，并行性高。     

Experimental investigation and correlation development of jet impingement heat transfer with two rows of aligned jet holes on an internal surface of a wing leading edge

Extensive experimental studies on the heat transfer characteristics of two rows of aligned jet holes impinging on a concave surface in a wing leading edge were conducted, where50000 Rej 90000, 1.74 H/d 27.5, 66° a 90°, and 13.2 r/d 42.03. The finding was that the heat transfer performance at the jet-impingement stagnation point with two rows of aligned jet holes was the same as that with a single row of jet holes or the middle row of three-row configurations when the circumferential angle of the two jet holes was larger than 30°. The attenuation coefficient distribution of the jet impingement heat transfer in the chordwise direction was so complicated that two zones were divided for a better analysis. It indicated that: the attenuation coefficient curve in the jet impingement zone exhibited an approximate upside-down bell shape with double peaks and a single valley; the attenuation coefficient curve in the non-jet impingement zone was like a half-bell shape, which was similar to that with three rows of aligned jet holes; the factors,including Rej, H/d and r/d, affected the attenuation coefficient value at the valley significantly.When r/d was increased from 30.75 to 42.03, the attenuation rates of attenuation coefficient increased only by 1.8%. Consequently, experimental data-based correlation equations of the Nusselt number for the heat transfer at the jet-impingement stagnation point and the distributionof the attenuation coefficient in the chordwise direction were acquired, which play an important role in designing the wing leading edge anti-icing system with two rows of aligned jet holes.     

计算机在光栅和线纹检测中的应用

介绍了一个将PC机和8031单片机组成的计算机系统应用于光栅尺、线纹尺检测的实例。     

基于Solid-Works的齿轮参数化设计

由于Solid-Works2003及以前版本的软件，其标准件图库中没有绘制各种齿轮的功能，本文介绍了在Solid-Works中实现参数化齿轮三维造型的一种方法，应用此方法可以在Solid-Works环境下完成齿轮的参数化三维绘制。