微动工作台的研制及特性研究

介绍了一种根据仿生学原理设计而成的由电致伸缩微位移器为驱动元件的大范围高精度的微动工作台，该工作台采用电致伸缩微位移器直接驱动的柔性铰链机构，使其既可以在小范围内实现高精度的微动，又可以实现大范围的宏动。同时还对工作台的特性进行了测试实验和分析。     

某高压压气机第4级转子叶片断裂分析

针对某燃气轮机在试车过程中高压压气机第4级转子叶片的断裂失效故障,通过外观检查、断口分析、表面检查、成分分析、组织检查、硬度测试和模拟试验等手段,对断裂性质和产生原因进行分析。结果表明:故障叶片为疲劳断裂。在试车过程中叶尖与机匣涂层严重碰摩,使叶片承受非正常冲击载荷是促使故障叶片产生疲劳裂纹的主要原因,叶片原始加工刀痕和喷丸质量差起促进作用。提出提高叶片加工质量,控制合理的叶片与机匣涂层之间的间隙的改进建议,以避免类似故障的发生。     

弹道跟踪数据野值剔除方法性能分析

弹道跟踪数据中的野值会影响导弹目标定位精度。对用于弹道跟踪数据的野值剔除方法进行了综述。结合事后和实时两大类处理模式,分析了各野值剔除方法在理论和工程应用上的优缺点,给出了实际应用时的限制因素,建立了野值判决准则和相应的野值剔除实现步骤。仿真结果表明:野值剔除方法可以有效提高弹道跟踪数据的精度。事后处理模式中,基于格拉布斯准则的野值剔除效果最佳;实时处理模式中,基于自适应门限的五点线性预报法野值剔除效果相对较好,且时间复杂度相对较低,适合实时处理。     

电火花加工计算机辅助工艺过程设计系统

介绍电火花计算机辅助工艺过程设计系统（ＣＡＰＰＳ），用于为一个给定目标选择最佳操作。同时，还考虑了其它的会影响ＥＤＭ加工过程的加工方法（如铣削等）。系统的输入信息是在已有的ＣＡＤ信息的基础上产生的基于ＣＡＰＰ特征的工件描述。每个特征类对应于一个特定的一般工艺规程，并由系统对其进行评价，然后基于最低成本的原则，计算出最优工艺规程。同时还介绍了一种计算工时的通用方法。     

A strategic flight conflict avoidance approach based on a memetic algorithm

Conflict avoidance （CA） plays a crucial role in guaranteeing the airspace safety. The cur- rent approaches, mostly focusing on a short-term situation which eliminates conflicts via local adjust- ment, cannot provide a global solution. Recently, long-term conflict avoidance approaches, which are proposed to provide solutions via strategically planning traffic flow from a global view, have attracted more attentions. With consideration of the situation in China, there are thousands of flights per day and the air route network is large and complex, which makes the long-term problem to be a large-scale combinatorial optimization problem with complex constraints. To minimize the risk of premature convergence being faced by current approaches and obtain higher quality solutions, in this work, we present an effective strategic framework based on a memetic algorithm （MA）, which can markedly improve search capability via a combination of population-based global search and local improve- ments made by individuals. In addition, a specially designed local search operator and an adaptive local search frequency strategy are proposed to improve the solution quality. Furthermore, a fast genetic algorithm （GA） is presented as the global optimization method. Empirical studies using real traffic data of the Chinese air route network and daily flight plans show that our approach outper- formed the existing approaches including the GA .based approach and the cooperative coevolution based approach as well as some well-known memetic algorithm based approaches.     

Adaptive Gaussian sum squared-root cubature Kalman filter with split-merge scheme for state estimation

The paper deals with state estimation problem of nonlinear non-Gaussian discrete dynamic systems for improvement of accuracy and consistency. An efficient new algorithm called the adaptive Gaussian-sum square-root cubature Kalman filter（AGSSCKF） with a split-merge scheme is proposed. It is developed based on the squared-root extension of newly introduced cubature Kalman filter（SCKF） and is built within a Gaussian-sum framework. Based on the condition that the probability density functions of process noises and initial state are denoted by a Gaussian sum using optimization method, a bank of SCKF are used as the sub-filters to estimate state of system with the corresponding weights respectively, which is adaptively updated. The new algorithm consists of an adaptive splitting and merging procedure according to a proposed split-decision model based on the nonlinearity degree of measurement. The results of two simulation scenarios（one-dimensional state estimation and bearings-only tracking） show that the proposed filter demonstrates comparable performance to the particle filter with significantly reduced computational cost.     

飞机下滑波束导引系统设计及仿真

下滑波束导引系统是飞机在自动着陆时所采用的一种重要无线电波束导引系统。首先,简要阐述了下滑波束导引系统的基本工作原理;然后,对导引系统的运动学环节及下滑耦合器进行分析,对飞机下滑波束导引系统结构进行设计;最后,在MATLAB平台下,对所设计的下滑波束导引系统进行大量仿真研究。仿真结果显示。所设计的下滑波束导引系统结构是合理的,其控制系统是稳定的,且其稳态性能也得到改善。     

热敏电阻自动测试与分选

提出了对热敏电阻测量值进行补偿校正的方法。叙述了PTC热敏电阻自动分选仪的组成结构和实现方法，可以对烧结成形的热敏电阻图片进行全自动测量分选。     

一种用于液晶曝光中的激光检测系统

介绍了一种非接触式激光检测系统，可用于检测液晶曝光中液晶模板与基板之间的间隙，给出了该种系统的测量原理、硬件系统、信号处理方法、测量结果、分辨力和误差分析，并指出了这种测量系统的应用。     

弹地人在回路末制导时延补偿改进模型

基于弹地通信链路的人在回路制导导弹利用惯性导航系统短时导航精度高的特点,对导弹末制导中导引指令的时间延迟提出了两种补偿模型及改进方法。通过Simulink仿真,得出距离和导引量与目标横向误差的关系及其方法改进后精度的提高幅度,并进行了分析。仿真结果验证了该方法的有效性。