Analysis of BDS-3 distributed autonomous navigation based on BeiDou system simulation platform

Satellite autonomous navigation is an important function of the BeiDou-3 navigation System (BDS-3). Satellite autonomous navigation means that the navigation satellite uses long-term forecast ephemeris and Inter-Satellite Link (ISL) measurements to determinate its own spatial position and time reference without the support of the ground Operation and Control System (OCS) for a long time to ensure that the navigation system can normally maintain the time and space reference. This paper aims to analyze the feasibility of distributed autonomous navigation algorithms. For the first time, a ground parallel autonomous navigation test system (GPANTS) is built. The performance of distributed autonomous navigation is then analyzed using the two-way ISL ranging of BDS-3 satellites. First, the BDS simulation platform and the GPANTS are introduced. Then, the basic principles of distributed satellite autonomous orbit determination and time synchronization based on ISL measurements are summarized. Preliminary evaluation of the performance of the BDS-3 constellation autonomous navigation service under ideal conditions through simulation data. Then the performance of autonomous navigation for 22 BeiDou-3 satellites using ISL measurements is evaluated. The results show that when satellites operate autonomously for 50 days without the support of any ground station, the User Range Error (URE) of autonomous orbit determination is better than 3 m, and the time synchronization accuracy is better than 4 ns.     

BDS/GPS组合的H-ARAIM PBN和ADS-B应用可用性评估

水平-先进接收机自主完好性监测(H-ARAIM)属欧美大力发展的新型机载自主卫星导航完好性监测技术。从H-ARAIM的基于性能的导航(PBN)和广播式自动相关监视(ADS-B)应用方法出发,基于美国全球卫星导航系统(GPS)和中国自主北斗卫星导航系统(BDS)组合系统,综合考虑不同卫星故障概率、不同星座故障概率、不同星钟星历误差配置以及不同星座配置,全面仿真评估了H-ARAIM的PBN和ADS-B应用全球可用性,结果表明:卫星和星座故障概率变化,对水平保护级(HPL)结果的影响不足0.1%,PBN和ADS-B均可实现全球100%可用性;星钟星历误差变化,会导致较大幅度的HPL变化,最大值可达20 m,但对PBN和ADS-B应用可用性没有显著影响;不同星座配置会对全球和亚太区域平均99.9%HPL结果及PBN和ADS-B应用可用性产生显著影响,HPL变化幅度达到32 m,可用性随星座配置不同而变化,最差可降低到96%。所取成果可为北斗民航应用提供坚实的理论参考和可靠的技术支撑。     

基于卫星监视几何精度因子的UDRE值估计方法

星基增强导航系统(SBAS,Satellite Based Augmentation System)通过向用户提供用户差分距离误差(UDRE,User Differential Range Error),来保证广播星历和星钟改正数的精度并增强用户的完好性性能.给出了一种用于主控站的UDRE计算方法,提出了卫星监视几何精度因子(SSDOP,Satellite Surveillance Dilution of Precision)的概念.基于UDRE和SS-DOP的表达式,通过数学推导发现UDRE受到SSDOP和限制因子的影响,而限制因子可以用其统计平均值0.7438来替代,建立了由SSDOP估计UDRE的表达式.仿真结果表明:利用SS-DOP估计出的UDRE值,其误差不超过0.8 m,能够反映出当前卫星UDRE的特性,可以作为用户在无法接收完好性信息时快速推算UDRE的一种可行手段.     

WAAS卫星播发电文一致性分析

星基增强系统(SBAS)是在传统GNSS的基础上为了进一步满足民航用户对卫星导航系统越来越高的精度、完好性、连续性和可用性需求而应运而生.目前全球已建立起了多个SBAS系统,其中提供服务时间最长的是美国的WAAS系统.WAAS系统包括38个参考站、3个主控站、6个上注站和3颗GEO卫星,每个参考站配备3套独立的监测接收...     

Beidou wide-area augmentation system clock error correction and performance verification

On December 27, 2018, the Beidou-3 System (BDS-3) has completed the deployment of 18 Medium Earth Orbit (MEO) satellites combined as a space constellation. In addition to the augmentation information for the new system signals B1C and B2a, the BDS-3 is compatible with the three augmentation information broadcast by the BDS-2 system for B1I and B3I signals: equivalent clock error correction, User Differential Ranging Error (UDRE) and Grid Ionosphere Vertical Error (GIVE). In this paper, the observation data of Beidou monitoring network are used to analyze the pseudo-range observation quality of the smooth transition signals B1I and B3I of BDS-2 and BDS-3. At the same time, the relationship between the equivalent clock error correction and the prediction error of the satellite clock is analyzed by using the Two-Way Satellite Time and Frequency Transfer (TWSTFT) data. The results show that the correlation between the equivalent clock error correction and the monitored clock error by using the TWSTFT data is greater than 60%. We calculate the UDRE by using the equivalent clock error correction. The results show that the satellite equivalent clock error correction can improve the accuracy of User Equivalent Range Error (UERE) by about 50%. This paper also compares the positioning accuracy of the BDS-2 satellites with the BDS-2 satellites combined BDS-3 satellites. The results show that the three-dimensional positioning accuracy is improved by about 30% after the BDS-3 satellites are added.     

北斗三号系统广域差分服务精度评估

为了保证北斗系统广域差分服务的平稳过渡，北斗三号系统（BDS-3）通过GEO卫星B1I/B3I信号播发北斗二号协议广域差分改正信息，包括等效钟差改正数与格网点电离层信息。分析了增加BDS-3卫星后，等效钟差改正数和格网点电离层信息的特征，并对BDS-2和BDS-3的用户差分距离误差（UDRE）进行了对比。联合BDS-2和BDS-3实测数据，对BDS-3广域差分服务定位精度进行了评估。分析结果表明:BDS-2卫星广播星历空间信号用户等效距离误差（UERE）约为1 m，经过等效钟差改正数后，用户差分距离误差约为0.3 m；BDS-3卫星广播星历空间信号用户等效距离误差约为0.4 m，经过等效钟差改正数后，用户差分距离误差约为0.2 m。等效钟差改正数可以修正广播电文更新带来的空间信号阶跃误差，显著提升卫星空间信号精度。与基本导航系统播发的Klobuchar 8模型，广域差分系统所播发的格网点电离层信息可将电离层误差修正精度提高约18%。与单独BDS-2卫星相比，BDS-2/BDS-3卫星联合条件下，基本导航的单频用户和双频用户定位精度可分别提升26%和41%；广域差分服务的单频用户定位精度为2.4 m，双频用户定位精度为1.7 m，单频用户和双频用户定位精度分别提升13%和41%。      

北斗D2导航电文解析和完好性性能分析

为评估北斗D2导航电文对系统空间信号完好性影响，对D2导航电文结构和内容进行研究。首先，通过基本导航信息的解析，给出了确定卫星位置和用户位置过程所需的信息和时间，并对受卫星星历和时钟影响的用户测距误差做了说明，介绍了电离层误差、对流层误差改正模型。然后，通过增强服务信息的解析，论述了完好性信息（RURA、UDRE）及格网电离层延迟的计算方法。最后给出了使用完好性信息、用户局部误差获取用户定位误差保护级的算法。     

Comprehensive performance review of BDS-3 after one-year official operation

On July 31, 2020, the third generation BeiDou Global Satellite Navigation System (BDS-3) was officially put into service. Here we first reviewed the development history of BDS-3, and described the status of BDS-3 constellation, satellite signals, and ground tracking network. Then we expounded the 10 innovations in which BDS-3 differs from the other global satellite navigation systems. In addition, the latest service performance status of BDS-3 was displayed from a comprehensive perspective. The performance of BDS-3 was analyzed and evaluated from five aspects: constellation performance, observation data quality, spatial signal performance, PNT (Positioning, Navigation, and Timing) service performance, and precision positioning application. We used 14 indices to conduct comprehensive assessment of the BDS-3 service performance. Finally, the main direction of the next development of BDS was prospected.     

一种基于多虚拟观测量的组合导航自主完好性监测方法

完好性用于导航系统出现故障的情况下提供及时的告警，是生命安全类用户需要考虑的重要性能指标。基于惯性导航系统（INS）辅助的卫星导航自主完好性监测算法，提出了一种利用INS构造3颗虚拟卫星观测量的组合导航系统自主完好性监测方法，通过构造视线方向相互垂直的3颗卫星，最大限度利用组合导航中INS的导航信息，在2颗可见星条件下就能实现故障检测。相比传统接收机自主完好性监测(RAIM)方法，该方法提高了检测算法可用性。在GPS单星座且INS定位误差方差σ_s=1m条件下，加入35m单星故障幅值，传统加权RAIM故障检测概率为48.51%，本文算法检测概率为95.21%，检测性能提升47%；与INS辅助的卡尔曼滤波残差检测法相比，在相同INS精度等级条件下该方法也具有更高的检测概率。此外，仿真分析了不同INS精度等级对该方法故障检测性能的影响，结果表明INS精度越高，该方法检测性能越好。     

粒子群优化粒子滤波的接收机自主完好性监测

接收机自主完好性监测（RAIM）是航空卫星导航接收机必不可少的功能,为保持全球卫星导航系统（GNSS）在卫星发生故障时系统性能不降级,需要对卫星故障进行检测和隔离。针对接收机观测噪声非高斯分布的特点,提出一种基于粒子群优化粒子滤波（PSO-PF）的故障检测和隔离算法。通过粒子群优化粒子滤波对状态估计进行一致性检验实现故障检测。采集实测数据验证算法的检测性能,并与基于基本粒子滤波的完好性监测算法进行比较,结果表明:本文所提算法在非高斯测量噪声下可检测并隔离全球定位系统（GPS）故障卫星,其性能优于基于基本粒子滤波的完好性监测算法性能,对研究北斗卫星导航系统（BDS）接收机自主完好性监测具有一定的意义。      

Orbit determination of BeiDou navigation satellite system maneuvered satellites based on instantaneous velocity pulses parameters

The BeiDou navigation satellite system (BDS) comprises geostationary earth orbit (GEO) satellites as well as inclined geosynchronous orbit (IGSO) and medium earth orbit (MEO) satellites. Owing to their special orbital characteristics, GEO satellites require frequent orbital maneuvers to ensure that they operate in a specific orbital window. The availability of the entire system is affected during the maneuver period because service cannot be provided before the ephemeris is restored. In this study, based on the conventional dynamic orbit determination method for navigation satellites, multiple sets of instantaneous velocity pulses parameters which belong to one of pseudo-stochastic parameters were used to simulate the orbital maneuver process in the orbital maneuver arc and establish the observed and predicted orbits of the maneuvered and non-maneuvered satellites of BeiDou regional navigation satellite system (BDS-2) and BeiDou global navigation satellite system (BDS-3). Finally, the single point positioning (SPP) technology was used to verify the accuracy of the observed and predicted orbits. The orbit determination accuracy of maneuvered satellites can be greatly improved by using the orbit determination method proposed in this paper. The overlapping orbit determination accuracy of maneuvered GEO satellites of BDS-2 and BDS-3 can improve 2–3 orders of magnitude. Among them, the radial orbit determination accuracy of each maneuvered satellite is basically better than 1 m. simultaneously, the combined orbit determination of the maneuvered and non-maneuvered satellites does not have a great impact on the orbit determination accuracy of the non-maneuvered satellites. Compared with the multi GNSS products (indicated by GBM) from the German Research Centre for Geosciences (GFZ), the impact of adding the maneuvered satellites on the orbit determination accuracy of BDS-2 satellites is less than 9 %. Furthermore, the orbital recovery time and the service availability period are significantly improved. When the node of the predicted orbit is traversed approximately 3 h after the maneuver, the accuracy of the predicted orbit of the maneuvered satellite can reach that of the observed orbit. The SPP results for the BDS reached a normal level when the node of the predicted orbit was 2 h after the maneuver.     

Performance assessment of real-time orbit determination for the Haiyang-2D using onboard BDS-3/GPS observations

The Global Navigation Satellite System (GNSS) receivers equipped on the Haiyang-2D (HY-2D) satellite is capable of tracking the signals of both the third generation of BeiDou satellite navigation System (BDS-3) and the Global Positioning System (GPS), which make it feasible to assess the performance of real-time orbit determination (RTOD) for the HY-2D using onboard GNSS observations. In this study, the achievable accuracy and convergence time of RTOD for the HY-2D using onboard BDS-3 and GPS observations are analyzed. Benefiting from the binary-offset-carrier (BOC) modulation, the BDS-3 C1X signal includes less noise than the GPS C1C signal, which has the same signal frequency and chipping rate. The root mean squares (RMS) of the noises of C1X and C1C code measurements are 0.579 m and 1.636 m, respectively. Thanks to a ten-times higher chipping rate, the code measurements of BDS-3 C5P, GPS C1W and C2W are less noisy. The RMS of code noises of BDS-3 C5P, GPS C1W, and C2W are 0.044 m, 0.386 m, and 0.272 m, respectively. For the HY-2D orbit, the three-dimensional (3D) and radial accuracies can reach 31.8 cm and 7.5 cm with only BDS-3 observations, around 50 % better than the corresponding accuracies with GPS. Better performance of the BDS-3 in RTOD for the HY-2D is attributed to the high quality of its broadcast ephemeris. When random parameters are used to absorb ephemeris errors, substantial improvement is seen in the accuracy of HY-2D orbit with either BDS-3 or GPS. The 3D RMS of HY-2D orbit errors with BDS-3 and GPS are enhanced to 23.1 cm and 33.6 cm, and the RMS of the radial components are improved to 6.1 cm and 13.3 cm, respectively. The convergence time is 41.6 and 75.5 min for the RTOD with BDS-3 and GPS, while it is reduced to 39.2 and 27.4 min after the broadcast ephemeris errors are absorbed by random parameters. Overall, the achievable accuracy of RTOD with BDS-3 reaches decimeter level, which is even better than that with GPS, making real-time navigation using onboard BDS-3 observations a feasible choice for future remote sensing missions.     

全球导航卫星系统多星故障排除新方法

在全球导航卫星系统中,多颗卫星同时发生故障的概率会随着观测卫星数的增加而增加,从而,在接收机自主完好性监测中需考虑多星故障的处理.针对故障检测比故障排除简单、且故障检测率比故障排除率高的特征,以故障检测为基础,提出了一种新的多星故障排除方法——随机搜索法.该方法采用二进制对观测卫星进行编码,通过随机初始化方式获得初始无故障星座,再通过逐步搜索未选卫星方式来得到最终的含有最多无故障卫星的星座,实现故障排除功能.仿真结果表明:大部分情形下,新方法能获得99%以上的故障排除率,既能进行单星故障排除,也能进行多星故障排除,能有效满足全球导航卫星系统关于自主完好性的要求.      

BDS/GPS组合导航接收机自主完好性监测算法

为使接收机自主完好性监测（RAIM）技术应用于民航垂直引导进近（APV）飞行阶段成为可能,研究了BDS/GPS组合导航RAIM算法。提出了一种基于BDS/GPS定位解最优加权平均解的算法,结合最优加权平均解与BDS/GPS定位解的关系建立检验统计量,根据最大允许的虚警率计算检验门限,实现对故障所在卫星导航系统的检测,并采用加权最小二乘残差法对故障进行检测与识别。研究结果对多星座组合卫星导航系统应用于民航APV飞行阶段的导航具有一定的参考意义。      

时钟偏差辅助的GPS完整性监测算法

对伪距残差最小二乘的接收机自主完整性监测(RAIM)算法进行了分析.在此基础上,通过对接收机时钟偏差的建模,将模型预测的时钟偏差引入伪距残差最小二乘的RAIM算法中,保证了在可见星仅为4颗的情况下,仍能利用χ2检验法对全球定位系统(GPS)进行完整性监测,从而达到提高完整性监测算法有效性的目的.计算机仿真的结果显示,这种辅助方式不仅计算简单,而且有效可行.      

Assessment study of ionosphere correction model using single- and multi-shell algorithms approach over sub-Saharan African region

It is a known fact that ionosphere is the largest and the least predictable among the sources of error limiting the reliability and accuracy of Global Navigation Satellite Systems (GNSS) and its regional augmentation systems like Satellite Based Augmentation System (SBAS) in a safety-of-life application. The situation becomes worse in the Equatorial Ionization Anomaly (EIA) region, where the daytime ionization distribution is modified by the fountain effect that develops a crest of electron density at around ±15° to ±20° of the magnetic equator and a trough at the magnetic equator during the local noon hours. Related to this phenomenon is the appearance of ionosphere irregularities and plasma bubbles after local sunset. These may degrade further the quality of service obtained from the GNSS/SBAS system of the said periods. Considering the present operational augmentation systems, the accuracy and integrity of the ionosphere corrections estimate decreases as the level of disturbances increases. In order to provide a correct ionosphere correction to the user of GNSS operating in African EIA region and meet the integrity requirements, a certified ionosphere correction model that accurately characterizes EIA gradient with the full capacity to over-bound the residual error will be needed. An irregularities detector and a decorrelation adaptor are essential in an algorithm usable for African sub-Saharan SBAS operation. The algorithm should be able to cater to the equatorial plasma vertical drifts, diurnal and seasonal variability of the ionosphere electron density and also should take into account the large spatial and temporal gradients in the region. This study presents the assessment of the ionosphere threat model with single and multi-layer algorithm, using modified planar fit and Kriging approaches.     

BeiDou-3 orbit and clock quality of the IGS Multi-GNSS Pilot Project

Within the Multi-GNSS Pilot Project (MGEX) of the International GNSS Service (IGS), precise orbit and clock products for the BeiDou-3 global navigation satellite system (BDS-3) are routinely generated by a total of five analysis centers. The processing standards and specific properties of the individual products are reviewed and the BDS-3 orbit and clock product performance is assessed through direct inter-comparison, satellite laser ranging (SLR) residuals, clock stability analysis, and precise point positioning solutions. The orbit consistency evaluated by the signal-in-space range error is on the level of 4–8 cm for the medium Earth orbit satellites whereas SLR residuals have RMS values between 3 and 9 cm. The clock analysis reveals sytematic effects related to the elevation of the Sun above the orbital plane for all ACs pointing to deficiencies in solar radiation pressure modeling. Nevertheless, precise point positioning with the BDS-3 MGEX orbit and clock products results in 3D RMS values between 7 and 8 mm.     

GNSS Satellite Autonomous Integrity Monitoring (SAIM) using inter-satellite measurements

Integrity is the ability of Global Navigation Satellite Systems (GNSS) to detect faults in measurements and provide timely warnings to users and operators when the navigation system cannot meet the defined performance standards, which is of great importance for safety of life critical applications. Compared with both Receiver Autonomous Integrity Monitoring (RAIM) and ground based GNSS Integrity Channel (GIC) methods which are widely adopted nowadays, the Satellite Autonomous Integrity Monitoring (SAIM) method can be used to monitor orbit/ephemeris and clock errors, and has advantages in monitoring orbit and clock quality and providing instantaneous responses when faults happen.     

Satellite availability and positioning performance of uncombined precise point positioning using BeiDou-2 and BeiDou-3 multi-frequency signals

To realize the smooth transition from regional BeiDou Navigation Satellite System (BDS-2) to the global one (BDS-3), the integration of BDS-2 and BDS-3 is important for providing continuous, stable and reliable positioning, navigation and timing (PNT) services for global users. This work used 154 globally distributed multi-GNSS (Global Navigation Satellite System) experiment stations spanning 30 days to analyze the satellite availability and positioning performance of uncombined precise point positioning (UC-PPP) under current BDS-2 and BDS-3 constellations. We focused on three issues: the influence of BDS-3 receiver tracking abilities, the positioning performance among different areas, and the benefit of multi-frequency observations. The results show that the elliptical zone caused by poor BDS-2 satellite visibility is disappeared when the evenly distributed BDS-3 medium earth orbit satellites are introduced. When BDS-3 are integrated with BDS-2, the area with the Position Dilution of Precision (PDOP) less than 2 can be expanded to 75° S-75° N and 30° E-150° W. The positioning performance of BDS-3 and BDS-2/BDS-3 UC-PPP are seriously affected by the receiver tracking abilities of BDS-3 signals. When the maximum pseudo-random noise sequences (PRNs) of BDS-3 satellites tracked by stations are within 30 or 37, the positioning accuracy of static UC-PPP can be improved by 22.94% or 8.27% due to the integration of BDS-2 and BDS-3. Besides, the most improvement of BDS-2 and BDS-3 integration is achieved in Asia-Pacific regions, especially for the kinematic UC-PPP or the poor receiver tracking abilities of BDS-3. Similar to the multi-frequency BDS-2 UC-PPP, the benefit of multi-frequency signals for BDS-3 or BDS-2/BDS-3 UC-PPP is also non-vital. The three-dimensional positioning accuracy of BDS-2/BDS-3 multi-frequency UC-PPP in static mode and kinematic mode are 2.24 cm and 5.39 cm, while the corresponding convergence time are 49.62 min and 73.80 min, respectively. Compared with BDS-2, both the positioning accuracy and the convergence time of BDS-2/BDS-3 joint UC-PPP are improved by approximately over 50%, which indicates that BDS-3 has a great potential to provide high-quality PNT services as other global navigation satellite systems.     

精密进近阶段的多系统GNSS组合RAIM可用性算法及分析

给出了多系统全球卫星导航系统（GNSS）组合接收机自主完好性监测（ReceiverAutonomousIntegrityMonitoring,RAIM）可用性计算方法,在此基础上利用GPS、GLONASS实测数据与BDS、Galileo全星座仿真数据,分析了BDS、GPS、GLONASS和Galileo不同组合在精密进近阶段的RAIM可用性。通过试验分析发现,BDS的5颗地球同步轨道卫星和3颗倾斜地球同步轨道卫星对亚洲、非洲和欧洲大部分地区的RAIM可用性有很大的贡献。这些地区站星间几何观测结构得到改善,使得RAIM可用性相对于其他地区有很大幅度的提升。在亚太地区APV-I阶段单系统导航情况下,北斗导航系统RAIM可用性达到99.5%,高于其他三个导航系统。在精密进近阶段（APV-I、APV-II和CAT-I）,BDS与其他导航系统（GPS、GLONASS和Galileo）的组合导航可以满足全球大部分区域的RAIM可用性需求,大多可达到100%。