Design of BDS-3 integrity monitoring and preliminary analysis of its performance

With the improvement in the service accuracy and expansion of the application scope of satellite navigation systems, users now have high demands for system integrity that are directly related to navigation safety. As a crucial index to measure the reliability of satellite navigation systems, integrity is the ability of the system to send an alarm when an abnormity occurs. The new-generation Beidou Navigation Satellite System (BDS-3) prioritized the upgrading of system integrity as an important objective in system construction. Because the system provides both basic navigation and satellite-based augmentation system (SBAS) services by the operational control system, BDS-3 adopts an integrated integrity monitoring and processing strategy that applies satellite autonomous integrity monitoring and ground-based integrity monitoring for both the basic navigation service and SBAS navigation service. BDS-3 also uses an improved and refined integrity parameter system to provide slow, fast and real-time integrity parameters for basic navigation, and provide SBAS-provided integrity information messages in accordance with Radio Technical Commission for Aeronautics (RTCA) specification and dual frequency, multi-constellation (DFMC) specification to support the SBAS signal frequency, single constellation operation and DFMC operation respectively. The performance of BDS-3 system integrity monitoring is preliminarily verified during on-orbit testing in different states, including normal operation, satellite clock failure and satellite ephemeris failure. The results show that satellite autonomous integrity monitoring, ground-based integrity monitoring and satellite-based augmentation all correctly work within the system. Satellite autonomous integrity monitoring can detect satellite clock failure but not satellite orbit failure. However, ground-based integrity monitoring can detect both. Moreover, the satellite-based augmentation integrity system monitors the differential range error after satellite ephemeris and clock error corrections based on user requirements. Compared to the near minute-level time-to-alert capability of ground-based integrity monitoring, satellite autonomous integrity monitoring reduces the system alert time to less than 4 s. With a combined satellite-ground monitoring strategy and the implementation of different monitoring technologies, the BDS-3 integrity of service has been considerably improved.     

Introduction to global short message communication service of BeiDou-3 navigation satellite system

Short Message Communication (SMC) is a featured service of BeiDou Navigation Satellite System (BDS). After its successful deployment in 2003, Regional Short Message Communication (RSMC) service has been continuously serving China and its neighboring countries and regions, especially in life safety scenarios. In this paper, the architecture of the Global Short Message Communication (GSMC) system is proposed based on the medium earth orbit (MEO) constellation and the crosslinks of the global BeiDou navigation system (BDS-3). Three subtypes of GSMC service, i.e. positioning report, emergency search and rescue (SAR) and regular SMC are designed in accordance with the technical characteristic of integration of navigation and communication in BDS-3, which supports future wide applications of GSMC. The performance of the designed GSMC system is analyzed by numerical calculations. As BDS-3 was officially announced completion on July 31, 2020, GSMC has been providing initial service. First test results of the in orbit GSMC payloads are also presented in the paper to verify the designed capabilities. Preliminary results also show that the requirements of Global Maritime Distress and Safety System (GMDSS) can also be fulfilled.     

Satellite availability and positioning performance of uncombined precise point positioning using BeiDou-2 and BeiDou-3 multi-frequency signals

To realize the smooth transition from regional BeiDou Navigation Satellite System (BDS-2) to the global one (BDS-3), the integration of BDS-2 and BDS-3 is important for providing continuous, stable and reliable positioning, navigation and timing (PNT) services for global users. This work used 154 globally distributed multi-GNSS (Global Navigation Satellite System) experiment stations spanning 30 days to analyze the satellite availability and positioning performance of uncombined precise point positioning (UC-PPP) under current BDS-2 and BDS-3 constellations. We focused on three issues: the influence of BDS-3 receiver tracking abilities, the positioning performance among different areas, and the benefit of multi-frequency observations. The results show that the elliptical zone caused by poor BDS-2 satellite visibility is disappeared when the evenly distributed BDS-3 medium earth orbit satellites are introduced. When BDS-3 are integrated with BDS-2, the area with the Position Dilution of Precision (PDOP) less than 2 can be expanded to 75° S-75° N and 30° E-150° W. The positioning performance of BDS-3 and BDS-2/BDS-3 UC-PPP are seriously affected by the receiver tracking abilities of BDS-3 signals. When the maximum pseudo-random noise sequences (PRNs) of BDS-3 satellites tracked by stations are within 30 or 37, the positioning accuracy of static UC-PPP can be improved by 22.94% or 8.27% due to the integration of BDS-2 and BDS-3. Besides, the most improvement of BDS-2 and BDS-3 integration is achieved in Asia-Pacific regions, especially for the kinematic UC-PPP or the poor receiver tracking abilities of BDS-3. Similar to the multi-frequency BDS-2 UC-PPP, the benefit of multi-frequency signals for BDS-3 or BDS-2/BDS-3 UC-PPP is also non-vital. The three-dimensional positioning accuracy of BDS-2/BDS-3 multi-frequency UC-PPP in static mode and kinematic mode are 2.24 cm and 5.39 cm, while the corresponding convergence time are 49.62 min and 73.80 min, respectively. Compared with BDS-2, both the positioning accuracy and the convergence time of BDS-2/BDS-3 joint UC-PPP are improved by approximately over 50%, which indicates that BDS-3 has a great potential to provide high-quality PNT services as other global navigation satellite systems.     

Analysis of BDS-3 distributed autonomous navigation based on BeiDou system simulation platform

Satellite autonomous navigation is an important function of the BeiDou-3 navigation System (BDS-3). Satellite autonomous navigation means that the navigation satellite uses long-term forecast ephemeris and Inter-Satellite Link (ISL) measurements to determinate its own spatial position and time reference without the support of the ground Operation and Control System (OCS) for a long time to ensure that the navigation system can normally maintain the time and space reference. This paper aims to analyze the feasibility of distributed autonomous navigation algorithms. For the first time, a ground parallel autonomous navigation test system (GPANTS) is built. The performance of distributed autonomous navigation is then analyzed using the two-way ISL ranging of BDS-3 satellites. First, the BDS simulation platform and the GPANTS are introduced. Then, the basic principles of distributed satellite autonomous orbit determination and time synchronization based on ISL measurements are summarized. Preliminary evaluation of the performance of the BDS-3 constellation autonomous navigation service under ideal conditions through simulation data. Then the performance of autonomous navigation for 22 BeiDou-3 satellites using ISL measurements is evaluated. The results show that when satellites operate autonomously for 50 days without the support of any ground station, the User Range Error (URE) of autonomous orbit determination is better than 3 m, and the time synchronization accuracy is better than 4 ns.     

北斗三号系统广域差分服务精度评估

为了保证北斗系统广域差分服务的平稳过渡，北斗三号系统（BDS-3）通过GEO卫星B1I/B3I信号播发北斗二号协议广域差分改正信息，包括等效钟差改正数与格网点电离层信息。分析了增加BDS-3卫星后，等效钟差改正数和格网点电离层信息的特征，并对BDS-2和BDS-3的用户差分距离误差（UDRE）进行了对比。联合BDS-2和BDS-3实测数据，对BDS-3广域差分服务定位精度进行了评估。分析结果表明:BDS-2卫星广播星历空间信号用户等效距离误差（UERE）约为1 m，经过等效钟差改正数后，用户差分距离误差约为0.3 m；BDS-3卫星广播星历空间信号用户等效距离误差约为0.4 m，经过等效钟差改正数后，用户差分距离误差约为0.2 m。等效钟差改正数可以修正广播电文更新带来的空间信号阶跃误差，显著提升卫星空间信号精度。与基本导航系统播发的Klobuchar 8模型，广域差分系统所播发的格网点电离层信息可将电离层误差修正精度提高约18%。与单独BDS-2卫星相比，BDS-2/BDS-3卫星联合条件下，基本导航的单频用户和双频用户定位精度可分别提升26%和41%；广域差分服务的单频用户定位精度为2.4 m，双频用户定位精度为1.7 m，单频用户和双频用户定位精度分别提升13%和41%。      

Performance assessment of real-time orbit determination for the Haiyang-2D using onboard BDS-3/GPS observations

The Global Navigation Satellite System (GNSS) receivers equipped on the Haiyang-2D (HY-2D) satellite is capable of tracking the signals of both the third generation of BeiDou satellite navigation System (BDS-3) and the Global Positioning System (GPS), which make it feasible to assess the performance of real-time orbit determination (RTOD) for the HY-2D using onboard GNSS observations. In this study, the achievable accuracy and convergence time of RTOD for the HY-2D using onboard BDS-3 and GPS observations are analyzed. Benefiting from the binary-offset-carrier (BOC) modulation, the BDS-3 C1X signal includes less noise than the GPS C1C signal, which has the same signal frequency and chipping rate. The root mean squares (RMS) of the noises of C1X and C1C code measurements are 0.579 m and 1.636 m, respectively. Thanks to a ten-times higher chipping rate, the code measurements of BDS-3 C5P, GPS C1W and C2W are less noisy. The RMS of code noises of BDS-3 C5P, GPS C1W, and C2W are 0.044 m, 0.386 m, and 0.272 m, respectively. For the HY-2D orbit, the three-dimensional (3D) and radial accuracies can reach 31.8 cm and 7.5 cm with only BDS-3 observations, around 50 % better than the corresponding accuracies with GPS. Better performance of the BDS-3 in RTOD for the HY-2D is attributed to the high quality of its broadcast ephemeris. When random parameters are used to absorb ephemeris errors, substantial improvement is seen in the accuracy of HY-2D orbit with either BDS-3 or GPS. The 3D RMS of HY-2D orbit errors with BDS-3 and GPS are enhanced to 23.1 cm and 33.6 cm, and the RMS of the radial components are improved to 6.1 cm and 13.3 cm, respectively. The convergence time is 41.6 and 75.5 min for the RTOD with BDS-3 and GPS, while it is reduced to 39.2 and 27.4 min after the broadcast ephemeris errors are absorbed by random parameters. Overall, the achievable accuracy of RTOD with BDS-3 reaches decimeter level, which is even better than that with GPS, making real-time navigation using onboard BDS-3 observations a feasible choice for future remote sensing missions.     

Precise orbit determination and precision comparison for FY3C and FY3D with receiver antenna GPS and BDS PCV using spaceborne BDS and GPS observation data

The FY3C and FY3D satellites were equipped with global navigation satellite occultation detector (GNOS) receivers that received both GPS and BDS-2 signals. For further improving precise orbit determination (POD) precisions, we estimated receiver GPS and BDS signal phase center variations (PCV) models with 2° and 5° resolutions and set the different weights for GPS and BDS-2 observations in the combined POD. The BDS-based POD precision using BDS-2 satellite antenna phase center offset (PCO) values from the China Satellite Navigation Office (CSNO) are not as accurate as those obtained from the International GNSS Service (IGS) Multi-GNSS experiments project (MGEX). The estimated receiver GPS and BDS PCV models with 2° and 5° resolutions were estimated from the GPS phase residuals of GPS-based POD and BDS phase residuals of combined POD, respectively. In most cases, the POD precisions using the estimated PCVs with 2° resolution are superior to those with 5° resolution. The precisions of the BDS-based POD and combined POD were both improved by introducing the receiver BDS PCV models. The weighting for GPS and BDS-2 observations can further improve the precision of the combined POD. The tested results of selected weights are better than those with equal weight in the combined POD. The experiment results show that orbital precisions of FY3C are worse than those of FY3D.     

Beidou wide-area augmentation system clock error correction and performance verification

On December 27, 2018, the Beidou-3 System (BDS-3) has completed the deployment of 18 Medium Earth Orbit (MEO) satellites combined as a space constellation. In addition to the augmentation information for the new system signals B1C and B2a, the BDS-3 is compatible with the three augmentation information broadcast by the BDS-2 system for B1I and B3I signals: equivalent clock error correction, User Differential Ranging Error (UDRE) and Grid Ionosphere Vertical Error (GIVE). In this paper, the observation data of Beidou monitoring network are used to analyze the pseudo-range observation quality of the smooth transition signals B1I and B3I of BDS-2 and BDS-3. At the same time, the relationship between the equivalent clock error correction and the prediction error of the satellite clock is analyzed by using the Two-Way Satellite Time and Frequency Transfer (TWSTFT) data. The results show that the correlation between the equivalent clock error correction and the monitored clock error by using the TWSTFT data is greater than 60%. We calculate the UDRE by using the equivalent clock error correction. The results show that the satellite equivalent clock error correction can improve the accuracy of User Equivalent Range Error (UERE) by about 50%. This paper also compares the positioning accuracy of the BDS-2 satellites with the BDS-2 satellites combined BDS-3 satellites. The results show that the three-dimensional positioning accuracy is improved by about 30% after the BDS-3 satellites are added.     

GNSS遥感探测卫星星座设计

随着全球导航卫星系统（Global Navigation Satellite System，GNSS）掩星大气探测技术的兴起，GNSS遥感探测数据在气象数据资源中逐步占据重要地位，但是目前的掩星探测数量远不能满足数值天气预报等应用的需求，未来更需要充分利用GNSS信号资源，开展更大规模的GNSS掩星卫星星座探测.本文以世界气象组织发布的大气海洋数据需求为参考，提出新一代GNSS遥感探测星座任务需求与设计约束.在理想大气模型假设下，利用几何解析方法研究了探测卫星星座构型参数对探测性能的影响，并建立了新一代GNSS遥感探测卫星星座设计基本准则.以风云卫星为子星座，给出了星座规模同为40颗的三种GNSS遥感探测微纳卫星星座设计方案.研究结果表明，具备该规模的探测星座可满足数值天气预报等气象应用的最低数据需求，三种构型方案中，由高、中、低倾角三组Walker子星座与风云卫星子星座组建的GNSS遥感探测星座探测性能最优.      

星座备份策略研究进展

针对星座卫星在轨运行时因操作或故障导致星座服务性能下降的现象，综述了星座备份策略研究的进展。首先，概述了导航星座、通信星座的基本情况和备份现状，归纳出不同星座的备份策略。其次，重点阐述了3种不同的星座备份策略模式，即在轨备份、停泊轨道备份及地面备份，给出了3种备份策略模式的特点。在此基础上，分别从卫星故障模式、卫星可靠性、卫星可用性、星座状态概率和星座系统可用性5个方面梳理了国内外星座备份策略关键因素的研究进展。再次，综述了目前星座备份策略分析的主要模型和方法，包括Petri网、马尔可夫链以及存储论。最后，对未来星座备份策略研究的发展方向进行了展望。     

Orbit determination of BeiDou navigation satellite system maneuvered satellites based on instantaneous velocity pulses parameters

The BeiDou navigation satellite system (BDS) comprises geostationary earth orbit (GEO) satellites as well as inclined geosynchronous orbit (IGSO) and medium earth orbit (MEO) satellites. Owing to their special orbital characteristics, GEO satellites require frequent orbital maneuvers to ensure that they operate in a specific orbital window. The availability of the entire system is affected during the maneuver period because service cannot be provided before the ephemeris is restored. In this study, based on the conventional dynamic orbit determination method for navigation satellites, multiple sets of instantaneous velocity pulses parameters which belong to one of pseudo-stochastic parameters were used to simulate the orbital maneuver process in the orbital maneuver arc and establish the observed and predicted orbits of the maneuvered and non-maneuvered satellites of BeiDou regional navigation satellite system (BDS-2) and BeiDou global navigation satellite system (BDS-3). Finally, the single point positioning (SPP) technology was used to verify the accuracy of the observed and predicted orbits. The orbit determination accuracy of maneuvered satellites can be greatly improved by using the orbit determination method proposed in this paper. The overlapping orbit determination accuracy of maneuvered GEO satellites of BDS-2 and BDS-3 can improve 2–3 orders of magnitude. Among them, the radial orbit determination accuracy of each maneuvered satellite is basically better than 1 m. simultaneously, the combined orbit determination of the maneuvered and non-maneuvered satellites does not have a great impact on the orbit determination accuracy of the non-maneuvered satellites. Compared with the multi GNSS products (indicated by GBM) from the German Research Centre for Geosciences (GFZ), the impact of adding the maneuvered satellites on the orbit determination accuracy of BDS-2 satellites is less than 9 %. Furthermore, the orbital recovery time and the service availability period are significantly improved. When the node of the predicted orbit is traversed approximately 3 h after the maneuver, the accuracy of the predicted orbit of the maneuvered satellite can reach that of the observed orbit. The SPP results for the BDS reached a normal level when the node of the predicted orbit was 2 h after the maneuver.     

LEO enhanced Global Navigation Satellite System (LeGNSS) for real-time precise positioning services

Global Navigation Satellite System (GNSS) has been widely used in many geosciences areas with its Positioning, Navigation and Timing (PNT) service. However, GNSS still has its own bottleneck, such as the long initialization period of Precise Point Positioning (PPP) without dense reference network. Recently, the concept of PNTRC (Positioning, Navigation, Timing, Remote sensing and Communication) has been put forward, where Low Earth Orbit (LEO) satellite constellations are recruited to fulfill diverse missions. In navigation aspect, a number of selected LEO satellites can be equipped with a transmitter to transmit similar navigation signals to ground users, so that they can serve as GNSS satellites but with much faster geometric change to enhance GNSS capability, which is named as LEO constellation enhanced GNSS (LeGNSS). As a result, the initialization time of PPP is expected to be shortened to the level of a few minutes or even seconds depending on the number of the LEO satellites involved. In this article, we simulate all the relevant data from June 8th to 14th, 2014 and investigate the feasibility of LeGNSS with the concentration on the key issues in the whole data processing for providing real-time PPP service based on a system configuration with fourteen satellites of BeiDou Navigation Satellite System (BDS), twenty-four satellites of the Global Positioning System (GPS), and sixty-six satellites of the Iridium satellite constellations. At the server-end, Precise Orbit Determination (POD) and Precise Clock Estimation (PCE) with various operational modes are investigated using simulated observations. It is found out that GNSS POD with partial LEO satellites is the most practical mode of LeGNSS operation. At the user-end, the Geometry Dilution Of Precision (GDOP) and Signal-In-Space Ranging Error (SISRE) are calculated and assessed for different positioning schemes in order to demonstrate the performance of LeGNSS. Centimeter level SISRE can be achieved for LeGNSS.     

基于TLE的Starlink星座第一阶段部署情况分析

近年来,随着卫星技术的快速发展和低轨（low earth orbit,LEO）卫星宽带互联网建设需求的不断增加,低轨大规模星座发展日新月异。针对Starlink星座初始化部署问题,首先论述了“星链”（Starlink）星座现状,分析在轨卫星高度变化。然后利用公开的两行轨道根数（two-line element,TLE）,从卫星发射入轨、轨道面分布两个方面,简要分析了Starlink星座的部署情况,给出升交点的变化规律;同时仿真分析了Starlink星座对地面的覆盖性能。最后,给出星座轨道面和相位分布、故障卫星处置以及可见卫星数量。所分析的结果以期为中国未来部署大规模LEO星座的建设提供借鉴。     

卫星导航系统失效性能分析与重构方法研究

摘要： 以建成后的北斗卫星导航系统为对象,研究导航星座中有卫星失效下的星座性能和重构方法.分析不同失效模式下导航星座的服务性能,在此基础上建立导航星座重构构型的优化模型和基于遗传算法的导航星座重构构型优化设计方法;研究星座构型重构过程中卫星的机动策略和机动模型;针对某一具体的失效情况通过仿真计算验证重构模型的有效性和准确性并给出该失效情况下构型重构的机动方案.     

Initial accuracy and reliability of current BDS-3 precise positioning,velocity estimation,and time transfer (PVT)

The primary system of Chinese global BeiDou satellite system (BDS-3) was completed to provide global services on December 27, 2018; this was a key milestone in the development process for BDS in terms of its provision of global services. Therefore, this study analyzed the current performance of BDS-3, including its precise positioning, velocity estimation, and time transfer (PVT). The datasets were derived from international GNSS monitoring and assessment system (iGMAS) tracking networks and the two international time laboratories in collaboration with the International Bureau of Weights and Measures (BIPM). With respect to the positioning, the focus is on the real-time kinematic (RTK) positioning and precise point positioning (PPP) modes with static and kinematic scenarios. The results show that the mean available satellite number is 4.8 for current BDS-3 system at short baseline XIA1–XIA3. The RTK accuracy for three components is generally within cm level; the 3D mean accuracy is 8.9 mm for BDS-3 solutions. For the PPP scenarios, the convergence time is about 4 h for TP01 and BRCH stations in two scenarios. After the convergence, the horizontal positioning accuracy is better than cm level and the vertical accuracy nearly reaches the 1 dm level. With respect to kinematic scenarios, the accuracy stays at the cm level for horizontal components and dm level for the vertical component at two stations. In terms of velocity estimation, the horizontal accuracy stays at a sub-mm level, and the vertical accuracy is better than 2 mm/s in the BDS-3 scenario, even in the Arctic. In terms of time and frequency transfer, the noise level of BDS-3 time links can reach 0.096 ns for long-distances link NT01–TP02 and 0.016 ns for short-distance links TP01–TP02. Frequency stability reaches 5E–14 accuracy when the averaging time is within 10,000 s for NT01–TP02 and 1E–15 for TP01–TP02.     

Kalman filter based estimation of differential hardware biases with triangular interpolation technique for IRNSS

Ionosphere delay correction is the main error correction to the computation of single frequency user position using satellite navigation. However ionosphere delay consists of not only delay but also frequency dependent differential hardware biases from satellite and receiver ends. For ionosphere point of view, Indian Regional Navigation Satellite System (IRNSS) service area comes in equatorial anomaly region. It is a unique satellite navigation system which operates at L5 and S frequencies and consists of Geostationary Earth Orbit (GEO) and Geo Synchronous Orbit (GSO) satellite constellation. With IRNSS measurements availability, there is a good opportunity to estimate and analyse differential hardware biases with GEO/GSO combination and with equatorial ionosphere variation. In this paper, Kalman filter based estimation with triangular interpolation technique is used to estimate differential hardware biases for all IRNSS satellites and reference receivers at L5 frequency. The standard deviation of the 15?days of daily estimation of satellite differential hardware biases is in the range of 0.32 to 1.17 TECU for all IRNSS satellites. Similarly, the standard deviation of the 15?days of daily estimation varies up to 2.85 and 6.0 TECU for receiver differential hardware biases during calm and stormy period respectively. The ionosphere delay computed using estimated differential hardware biases is compared with Global Ionosphere Map (GIM) data. A rigorous analysis is carried out to study the error in the estimation in terms of input data noise level, satellite constellation and effect of latitude. Our result reveals that over IRNSS service area, there is an exponential increase in the error in the estimation of receiver differential hardware biases with respect to latitude.     

An optimized strategy for inter-satellite links assignments in GNSS

Inter-Satellite Links (ISLs) can effectively enhance the Global Navigation Satellite System (GNSS) performance, such as communication and ranging performance. These performances would have been improved by disposing sparsely of ground stations and ISLs. Here, we demonstrate a topology scheduling strategy based on Signed Variance and Blossom algorithm (SV-Blossom) to promote the topology performance of GNSS. We also analyze the effect of this strategy on the robustness of the ranging information quality of the ISLs assignments system. For the domestic and overseas satellite communication Time Delay (TD) and Position Dilution of Precision (PDOP), by analyzing the relation of satellites, a set of the ISLs cost models is established, and the cost matrix is obtained. The final ISLs assignments result is obtained by processing the link cost matrix with the Blossom algorithm in the graph theory. In order to verify the rationality of the SV-Blossom strategy, a typical BDS-3 simulation scene with 10080 min is built to test these performances of ISLs. The final results show that the ranging information quality of the SV-Blossom strategy is greatly improved compared with recently published strategies, and the proposed links assignments mechanism has good robustness.     

Orbit determination of BDS-3 satellite based on regional ground tracking station and inter-satellite link observations

The BeiDou global navigation satellite system (BDS-3) has established the Ka-band inter-satellite link (ISL) to realize a two-way ranging function between satellites, which provides a new observation technology for the orbit determination of BDS-3 satellites. Therefore, this study presents a BDS satellite orbit determination model based on ground tracking station (GTS) observations and ISL ranging observations firstly to analyze the impact of the ISL ranging observations on the orbit determination of BDS-3 satellites. Subsequently, considering the data fusion processing, the variance component estimation (VCE) algorithm is applied to the parameter estimation process of the satellite orbit determination. Finally, using the measured data from China’s regional GTS observations and BDS-3 ISL ranging observations, the effects of ISL ranging observations on the orbit determination accuracy of BDS-3 satellites are analyzed. Moreover, the impact of the VCE algorithm on the fusion data processing is evaluated from the aspects of orbit determination accuracy, Ka-band hardware delay parameter stability, and ISL ranging observation residuals. The results show that for China’s regional GTSs, the addition of BDS-3 ISL ranging observations can significantly improve the orbit determination accuracy of BDS-3 satellites. The observed orbit determination accuracy of satellite radial component is improved from 48 cm to 4.1 cm. In addition, when the initial weight ratio between GTS observations and ISL ranging observations is not appropriate, the various indicators which include orbit determination accuracy, ISL hardware delay, and ISL observation residuals were observed to have improved after the adjustment of the VCE algorithm. These results validate the effectiveness of the VCE algorithm for the fusion data processing of the GTS observations and ISL ranging observations.     

中轨道Walker导航星座在轨备份方案优化设计

针对中轨道Walker导航星座在轨备份方案的优化问题，首先提出了在轨备份星轨位优化设计方法，考虑星座运行期间在轨备份星与工作卫星存在共同提供服务的情况，选取PDOP值和可见卫星数作为轨位优化指标，建立了轨位优化模型，并基于NSGA-Ⅱ算法对不同轨位下在轨备份星对导航星座服务性能的提升效果进行仿真分析；然后，基于在轨备份星轨位的优化结果，建立在轨备份星替换的轨道机动模型，并综合考虑速度增量和替换时间，确定了以替换时间最少为优化目标的在轨备份星替换方案。结果表明，提出的在轨备份方案能有效满足备份星的设计需求，增强导航星座的服务性能，实现故障卫星的快速替换，可为导航星座备份星的建设提供借鉴。     

基于覆盖圆的太阳同步回归轨道卫星目标轨迹调整方法

遥感卫星星座在环境监测、地理测绘等领域运用中,需要考虑目标轨迹分布的优化问题.轨迹分布与星座的重访能力和进出站间隔保持等应用需求密切相关.目前对星下点轨迹分布的优化和调整还缺乏准确实用的方法,存在卫星数目增多带来的计算量增加问题和对多种需求综合考虑不够的问题.为了克服现有技术的不足,解决太阳同步回归轨道遥感卫星星座的目...