空间碎片能量转化利用技术

针对目前空间碎片问题，提出空间碎片发动机概念，立足于使用捕获到的空间碎片，转化为发动机可用的推进剂。在完成碎片清理目标的同时，获得可持续的动力来源，延长清理器的工作寿命。针对空间碎片制粉的方法进行研究，提出使用球磨仪对金属样本进行研磨。使用转刀式粉碎机对非金属材料进行粉碎。通过实验发现，多数粉末粒径达到微米量级。针对空间碎片粉末推进方式进行研究，提出使用静电加速推进方式对粉末进行加速。空间碎片发动机虽然起源于空间碎片清理任务，但是可持续的推进剂供应，也将为小行星探测等任务提供更好的思路。     

In orbit performance of butane propulsion system

The present work focuses on the determination of the in orbit performance of the Alsat-1 microsatellite propulsion system. The satellite mass is 90 kg, of which 6.2 kg is the propulsion system dry mass. The system is a butane propulsion system using low power resistojet thruster with 2.3 kg of propellant. The liquefied butane gas was selected due to its higher storage density and safety compared to the other propellants used for microsatellites. The purpose of this paper is the analysis of the firings performed after the launch of the satellite and to evaluate the system specific impulse and thrust level during the system lifetime. A total of 273 firings were performed on the Alsat-1 propulsion system in the period between the end of 2002 and mid 2009, the cumulated firing time is more than 12 h 49 min. The analysis of all the propulsion telemetry data shows that the system provides a total mission delta V of 25.3 m/s which is more than the 10 m/s specified for this mission. Furthermore, the mission average specific impulse and thrust are respectively 99.9 s and 48.8 mN.     

空间站先进的推进系统

本文讨论空间站控制各种类型的推进系统。研究结论是推进剂消耗量是一个重要成本因素。电推进系统具有比化学推进器最少高一个数量级的比冲,所以采用电推进系统可以大量减少推进剂质量。电推进系统适用于比较大的总冲量的任务,诸如阻力补偿和轨道转移。     

Integration of In-Situ Resource Utilization into lunar/Mars exploration through field analogs

The ability to extract and process resources at the site of exploration into useful products such as propellants, life support and power system consumables, and radiation and rocket exhaust plume debris shielding, known as In-Situ Resource Utilization or ISRU, has the potential to significantly reduce the launch mass, risk, and cost of robotic and human exploration of space. The incorporation of ISRU into missions can also significantly influence technology selection and system development in other areas such as power, life support, and propulsion. For example, the ability to extract or produce large amounts of oxygen and/or water in-situ could minimize the need to completely close life support air and water processing system cycles, change thermal and radiation protection of habitats, and influence propellant selection for ascent vehicles and surface propulsive hoppers. While concepts and even laboratory work on evaluating and developing ISRU techniques such as oxygen extraction from lunar regolith have been going on since before the Apollo 11 Moon landing, no ISRU system has ever flown in space, and only recently have ISRU technologies been developed at a scale and at a system level that is relevant to actual robotic and human mission applications. Because ISRU hardware and systems have never been demonstrated or utilized before on robotic or human missions, architecture and mission planners and surface system hardware developers are hesitant to rely on ISRU products and services that are critical to mission and system implementation success. To build confidence in ISRU systems for future missions and assess how ISRU systems can best influence and integrate with other surface system elements, NASA, with international partners, are performing analog field tests to understand how to take advantage of ISRU capabilities and benefits with the minimum of risk associated with introducing this game-changing approach to exploration. This paper will describe and review the results of four analog field tests (Moses Lake in 6/08, Mauna Kea in 11/08, Flagstaff in 9/09, and Mauna Kea in 1/10) that have begun the process of integrating ISRU into robotic and human exploration systems and missions, and propose future ISRU-related analog field test activities that can be performed in collaboration with non-US space agencies.     

空间核电推进系统比质量优化建模及其木星探测应用分析

空间核电推进(Nuclear Electric Propulsion,NEP)系统是一种将核热能转换成电能,并驱动大功率电推力器而产生推力的革命性空间推进技术。和传统推进技术相比,NEP具有高比冲、大功率、长寿命等技术优势,非常适合未来大规模深空探测任务。基于NEP系统组成和小推力轨道理论,建立了以有效载荷为目标的NEP系统比质量优化模型。该模型能够解析NEP航天器的轨道运行时间、比质量、功率与有效载荷比的复杂耦合关系,为任务优化提供了计算依据。最后,利用该模型对NEP系统完成NASA "Juno号"航天任务进行了技术指标评估分析。计算表明,当NEP系统比质量达到4.8 kg/kWe时,其能将"Juno号"航天任务的地木转移时间由2 266 d缩短至665 d,有效载荷由160 kg提高到1 179 kg,极大地提高了航天器的探测能力,为任务方案的可行性论证和后续设计提供参考。     

Systems design of a hybrid sail pole-sitter

This paper presents the preliminary systems design of a pole-sitter. This is a spacecraft that hovers over an Earth pole, creating a platform for full hemispheric observation of the polar regions, as well as direct-link telecommunications. To provide the necessary thrust, a hybrid propulsion system combines a solar sail with a more mature solar electric propulsion (SEP) thruster. Previous work by the authors showed that the combination of the two allows lower propellant mass fractions, at the cost of increased system complexity. This paper compares the pure SEP spacecraft with the hybrid spacecraft in terms of the launch mass necessary to deliver a certain payload for a given mission duration. A mass budget is proposed, and the conditions investigated under which the hybrid sail saves on the initial spacecraft initial mass. It is found that the hybrid spacecraft with near- to mid-term sail technology has a lower initial mass than the SEP case if the mission duration is 7 years or more, with greater benefits for longer duration missions. The hybrid spacecraft with far-term sail technology outperforms the pure SEP case even for short missions.     

Integrated design of solar thermal propulsion system for microsatellite with liquid ammonia as propellant

This paper presents a design of solar thermal propulsion (STP) system for microsatellite with liquid ammonia as propellant. The system was equipped with two concentrators, which were respectively placed in the tank and thrust chamber for propellant supply and heating. A platelet heat exchanger was adopted to heat the propellant in the chamber, and the fluid–solid coupling effect between the wall and the gas was considered. Meanwhile, the effects of satellite mass, initial orbit, nozzle size and target temperature on the performance of STP system were analyzed. The results show that for microsatellites with a total mass of 100 kg, the STP system can fully heat the propellant to more than 2050 K, generate an intermittent thrust of about 26 N, and enable the satellite to obtain a velocity increment of more than 1470 m/s within 19 days, consuming only 42 kg of propellant, which can directly meet the transfer mission from the geostationary transfer orbit (GTO) to the geostationary orbit (GEO). The maximum velocity increment could reach more than 1950 m/s when the propellant was completely consumed; Changing the mass and initial orbit of the satellite will not affect the thrust and specific impulse. Satellites with smaller mass will spend less time and propellant during orbit transfer. The lower is the perigee height of the initial orbit, the greater is the propellant consumption, while the shorter is the time of orbit transfer; The reduction of nozzle throat size and target temperature will lead to the increase of specific impulse and the decrease of orbital transfer time, but the reduction of thrust.     

小行星探测电推进系统方案研究

小行星探测以及资源开发与利用对国家抢占深空探测主动权和制高点有着不可估量的战略意义。电推进具有高比冲、长寿命和高度自主巡航等特点,小行星探测器采用电推进执行巡航阶段轨道机动任务,将大幅减少推进剂重量和提高载重比。调研了国外小行星探测的电推进系统方案,针对我国小行星探测对电推进系统的任务需求及现有电推力器的技术基础,提出了5种电推进系统方案,并进行多维度对比,对最优方案进行了设计和关键技术梳理。     

Design of an FPGA-based electronic flow regulator (EFR) for spacecraft propulsion system

This paper describes a scheme for electronically regulating the flow of propellant to the thruster from a high-pressure storage tank used in spacecraft application. Precise flow delivery of propellant to thrusters ensures propulsion system operation at best efficiency by maximizing the propellant and power utilization for the mission. The proposed field programmable gate array (FPGA) based electronic flow regulator (EFR) is used to ensure precise flow of propellant to the thrusters from a high-pressure storage tank used in spacecraft application. This paper presents hardware and software design of electronic flow regulator and implementation of the regulation logic onto an FPGA.     

主带小行星采样返回任务中的离子电推进应用方案

由于离子电推进的高比冲特性,采用它执行小行星探测器巡航阶段轨道机动任务时,将使探测器在同样的有效载荷下的发射重量大大减轻。针对我国规划中的主带小行星采样返回任务,调研了国外离子电推进在深空探测任务中的应用情况,在借鉴国外成功经验和任务需求分析的基础上,设计了主带小行星探测器离子电推进系统方案和应用策略,计算了在目前离子推力器寿命水平下,既定探测任务对离子电推进推力、比冲、推进剂量以及功耗需求。研究表明,目前研制的离子推力器可以满足规划中的主带小行星探测任务需求。研究成果对探测器的方案设计有参考价值。     

串联与并联推进多级运载火箭线性化质量方程

推进系统的改变会影响运载器系统性能,这时要重新安排运载器系统,使其保持在最佳状态来完成空间任务.采用类似于〔1〕的线性化质量模型,分析推导了一次性使用多级运载火箭的串联与并联推进运载器的质量方程,并运用质量方程,对推进剂非交叉供应的并联推进运载器进行了分析,求出了系统设计参数对起飞质量的影响.     

“田园一号”微推进系统设计与性能测试

针对“田园一号”微纳星编队飞行任务的技术需求，开展了微推进系统的总体设计。常规冷气推进由于其比冲低、贮存压力高、结构复杂，难以满足微纳卫星需求。选择R134a作为推进工质，通过将推进剂液化，减小系统体积。基于3D打印技术，设计贮箱、稳压罐、管路一体的推进系统。采用MEMS加工工艺，设计并研制出电加热喷口，从而提高系统比冲。分析了不同喷口尺寸、供气压力以及温度下所产生的推力和比冲大小，确定出喷口设计。表征测试所研制的电加热喷口，结果表明喷口加工误差控制在2%以内。真空条件下，采用扭摆测量系统测试推力器推进性能，测试结果表明，当稳压罐内气体压力在0.1～0.2 MPa变化时，推力大小为5～10 mN。当喷气温度从25℃升至95℃时，推进系统比冲可提升10%以上。     

非合作失效航天器绳系拖曳系统研究

空间碎片的不断增加给人类航天活动的开展和在轨资产的安全造成严重威胁。在已经提出的多种空间碎片主动清除方式中，绳系拖曳（tethered space tug，TST）系统因有较好的应用前景而受到广泛关注。部分失效航天器因星上器件损坏且姿态控制系统异常，始终将姿态维持在某一特定指向，针对此类具有典型的非合作特征的大型空间碎片，开展绳系拖曳动力学与控制研究。将拖船和目标均视作刚体，用牛顿法建立了TST系统的动力学模型；根据目标姿态稳定方式分为自旋稳定和三轴稳定两种情况，开展了绳系拖曳动力学分析与控制设计，并考察了系绳在失效航天器表面连接点位置对系统稳定状态的影响。仿真结果表明，拖船和失效航天器会在系绳连接下表现出抗衡特点，最终系统会稳定在不同的均衡状态附近。此研究为安全清除尚有残余姿态控制能力的失效航天器中相关拖曳动力学与控制问题提供了参考。     

A deorbiter CubeSat for active orbital debris removal

This paper introduces a mission concept for active removal of orbital debris based on the utilization of the CubeSat form factor. The CubeSat is deployed from a carrier spacecraft, known as a mothership, and is equipped with orbital and attitude control actuators to attach to the target debris, stabilize its attitude, and subsequently move the debris to a lower orbit where atmospheric drag is high enough for the bodies to burn up. The mass and orbit altitude of debris objects that are within the realms of the CubeSat’s propulsion capabilities are identified. The attitude control schemes for the detumbling and deorbiting phases of the mission are specified. The objective of the deorbiting maneuver is to decrease the semi-major axis of the debris orbit, at the fastest rate, from its initial value to a final value of about 6471?km (i.e., 100?km above Earth considering a circular orbit) via a continuous low-thrust orbital transfer. Two case studies are investigated to verify the performance of the deorbiter CubeSat during the detumbling and deorbiting phases of the mission. The baseline target debris used in the study are the decommissioned KOMPSAT-1 satellite and the Pegasus rocket body. The results show that the deorbiting times for the target debris are reduced significantly, from several decades to one or two years.     

双模式离子液体推进剂的分解特性与热试车实验研究

硝酸羟胺(HAN)/1 乙基 3 甲基咪唑硫酸乙酯(［Emim］［EtSO4］)混合离子液体推进剂具有绿色无毒、高性能、易电离的特点，既可以应用于化学推进模式，又可以应用于电推进模式，是肼类推进剂的一种理想的替代品.利用热重分析 差示扫描量热法(TGA DSC)研究了HAN/［Emim］［EtSO4］离子液体推进剂的热分解和催化分解过程.研究了其在升温速率为5 K/min~15 K/min时，热分解和催化分解情况下的失重过程和放热过程.失重结果表明，该离子液体推进剂分解过程中，放热曲线表明，分解过程存在两个显著的放热过程使用催化剂可以显著地降低推进剂的分解温度和残余质量.最后，研制了推力为200 mN的模型发动机，热试车结果表明，HAN/［Emim］［EtSO4］离子液体推进剂可以在催化点火条件下实现稳定启动，在空间推进领域具有良好应用前景.     

深远空连续推进动力与施图林格解的解析

针对太阳系远深距离的探测将是人类下一阶段深空探测活动的主要目标。这一目标的实现依赖于探测器连续推进动力技术的突破。从描述连续常值推力下太空飞行的施图林格解出发,对其中反映的深远空飞行任务有效载荷比、任务时间、飞行距离等关键参数与发动机性能之间的关系进行了深入分析。给出了在特定任务时长、特定飞行距离要求下发动机比冲、功率需要满足的条件及其对有效载荷比、最终飞行速度等指标的影响。此外,基于二体轨道动力学对太阳系行星探测的大椭圆转移轨道和转移能量进行了推导,并对连续推力的太阳帆任务方案涉及的关键技术指标做了理论性的计算。这些结论是对深空探测连续推力方案基础理论的归纳,可以为我国未来开展深远空探测活动提供重要的启发和指导。     

Economic assessment of high-thrust and solar-sail propulsion for near-earth asteroid mining

Asteroid mining has the potential to greatly reduce the cost of in-space manufacturing, production of propellant for space transportation and consumables for crewed spacecraft, compared to launching the required resources from the Earth’s deep gravity well. This paper discusses the top-level mission architecture and trajectory design for these resource-return missions, comparing high-thrust trajectories with continuous low-thrust solar-sail trajectories. The paper focuses on maximizing the economic Net Present Value, which takes the time-cost of finance into account and therefore balances the returned resource mass and mission duration. The different propulsion methods are compared in terms of maximum economic return and sets of attainable target asteroids. Results for transporting resources to geostationary orbit show that the orbital parameter hyperspace of suitable target asteroids is considerably larger for solar sails, allowing for more flexibility in selecting potential target asteroids. Also, results show that the Net Present Value that can be realized is larger when employing solar sailing instead of chemical propulsion. In addition, it is demonstrated that a higher Net Present Value can be realized when transporting volatiles to the Lunar Gateway instead of geostationary orbit. The paper provides one more step towards making commercial asteroid mining an economically viable reality by integrating trajectory design, propulsion technology and economic modelling.     

Practical guidelines for electro-dynamic tethers to survive from orbital debris impacts

Japan Aerospace Exploration Agency (JAXA) has proposed an active debris removal using electro-dynamic tether to reduce large space debris in the low-Earth orbit. However, a tether strand is thin but long enough to have a large area so that it is vulnerable to small particles. This vulnerability might be the weakest point of a tether system against orbital debris. In order to overcome this weakest point, a double tether system, in which two tether strands are tied together at even intervals to form equally spaced loops, has been suggested as one of the promising candidates. This paper provides a mathematical approach to estimate the survival probability of a double tether system and then apply the approach to evaluate the mission success rate of the active debris removal using electro-dynamic tether that JAXA has proposed. It can be concluded the countermeasure to get enough success rate can be obtained. The result is simulated for Advanced Earth Observing Satellite II (ADEOS-II) re-entry from 800 km sun synchronized orbit to atmosphere. The simulation shows that mission success rate over 90% can be obtained with number of loops over 1000 and 10 mm clearance between two strands.     

Use of sunlight for plant lighting in a bioregenerative life support system – Equivalent system mass calculations

Plant lighting is a critical issue for cost effectiveness of bioregenerative systems. A plant lighting system using sunlight has been investigated and compared to systems using electrical lighting. Co-generation of electricity and use of in situ resource utilization (ISRU) were also considered. The fixed part of equivalent system mass was found to be reduced by factors of from 3.1 to 3.9, according to the mission assumptions. The time-dependent part of equivalent system mass was reduced by a smaller value, of about 1.05. Cost effectiveness of bioregeneration has been compared to the cost of shipping food. Break-even times for different Lunar and Mars missions were generally in the order of 2–10 years, and were quite sensitive to the assumptions. There is significant scope for future refinement of these values, and work is ongoing.