共查询到20条相似文献,搜索用时 62 毫秒
1.
2.
航天器推进系统水击及其抑制方法 总被引:2,自引:1,他引:1
针对航天器推进系统充填和关机过程水击这一动力学问题,基于已建立的航天器推进系统仿真模型,开展了某型推进系统的仿真研究,并重点分析了节流孔、弯管对推进剂供应管路水击的抑制作用.研究结果表明:①在推进系统充填和关机过程中,其不同位置均出现了明显的水击现象,充填过程水击频率较低,而关机过程水击频率较高,关机过程的水击峰值压力显著高于充填过程;②节流孔可显著削弱充填过程中的压力和流量振荡,关机过程的水击需要由较小的节流孔才能有效抑制;③弯管可明显削弱充填过程中的压力和流量振荡,对流量振荡的抑制效果尤为显著,但弯管对关机过程水击的抑制效果不明显. 相似文献
3.
以补燃循环液氧煤油发动机系统为研究对象,对其关机特性进行了研究。在分析发动机系统工作原理的基础上,应用模块化建模的思想,建立了该系统中各主要部件的数学模型;采用新的面向对象仿真语言Modelica和MWorks平台,开发了可扩展的发动机仿真模型库;在此基础上,利用模型库搭建了液氧煤油补燃循环发动机关机过程仿真模型,并对发动机关机过程进行了仿真计算,计算结果表明与试车数据基本相符,其中稳态相对误差小于5%,动态相对误差小于15%,初步验证了所建仿真模型的正确性;进一步分析了吹除气体压力、阀后腔道容积、关机工况等因素对发动机关机过程的影响。 相似文献
4.
5.
发动机起动/关机过程中喷管侧向载荷试验 总被引:1,自引:1,他引:0
为了获得大面积比喷管在发动机起动/关机过程中的侧向载荷,搭建了喷管侧向载荷冷流试验系统,通过测量应变管感知的喷管侧向载荷和通过加速度传感器感知的喷管振动载荷,分析发动机起动/关机过程中喷管侧向载荷的变化规律。试验表明:试验喷管在发动机起动/关机过程中均存在3个峰值侧向载荷,起动过程中分别对应着初始正激波向稳定自由激波分离的转变过程、自由激波分离向受限激波分离的转变过程以及分离激波结构处于“末端振动状态”,关机过程则恰好相反,而且关机过程相对起动过程的峰值侧向载荷发生压比存在一定的迟滞效应;喷管壁面的周向应变对侧向载荷非常敏感,而壁面轴向应变却基本不受喷管侧向载荷的影响;喷管侧向载荷是激励喷管振动的主导因素,并在试验喷管发生“末端振动效应”时,振动加速度峰值达到最大为80g。 相似文献
6.
7.
8.
9.
10.
11.
12.
基于飞机油箱模型形状特征油量测量切片步长选择方法研究 总被引:1,自引:0,他引:1
在分析飞机数字式油量测量过程中目前广泛使用的切片法油量测量原理的基础上,针对现有的定步长切片法无法得到准确、可靠的燃油质量特性数据库的缺陷,结合对飞机油箱模型形状特征的分析,提出了基于飞机油箱模型形状特征的油量测量切片步长选择方法。此方法包括切片步长整体和局部选择两个过程,整体选择以实现相邻两切片平面所夹油箱模型体积近似相等为目的来确定切片步长,以体现油箱模型截面整体变化规律;局部选择以设计切片平面与截面突变平面重合或尽可能接近的方式,突出油箱截面的局部变化特征。实验结果表明:该切片步长选择方法较定步长方法能够建立更为合理、可靠的燃油质量特性数据库,从而提高了油量测量精度。 相似文献
13.
NING Guo-dong ZHANG Shu-guang FANG Zhen-ping 《中国航空学报》2007,20(1):1-8
A method for the implementation of integrated three-degree-of-freedom constrained entry guidance for reusable launch vehicle is presented. Given any feasible entry conditions, terminal area energy management interface conditions, and the reference trajectory generated onboard then, the method can generate a longitudinal guidance profile rapidly, featuring linear quadratic regular method and a proportional-integral-derivative tracking law with time-varying gains, which satisfies all the entry corridor constraints and meets the requirements with high precision. Afterwards, by utilizing special features of crossrange parameter, establishing bank-reversal corridor, and determining bank-reversals according to dynamically adjusted method, the algorithm enables the lateral entry guidance system to fly a wide range of missions and provides reliable and good performance in the presence of significant aerodynamic modeling uncertainty. Fast trajectory guidance profiles and simulations with a reusable launch vehicle model for various missions and aerodynamic uncertain-ties are presented to demonstrate the capacity and reliability of this method. 相似文献
14.
15.
The effect of inlet conditions on the flow and heat transfer in multiple rotating cavity with axial throughflow 总被引:1,自引:0,他引:1
This paper discusses experimental results from two different build configurations of a heated multiple rotating cavity test rig.Measurements of heat transfer from the discs and tangential velocities are presented.The test rig is a 70% full scale version of a high pressure compressor stack of an axial gas turbine engine.Of particular interest are the internal cylindrical cavities formed by adjacent discs and the interaction of these with a central axial throughflow of cooling air.Tests were carried out for a range of non-dimensional parameters representative of high pressure compressor internal air system flows(Re up to 5×106 and Rez up to 2×105).Two different builds have been tested.The most significant difference between these two build configurations is the size of the annular gap between the(non-rotating) drive shaft and the bores of the discs.The heat transfer data were obtained from thermocouple measurements of surface temperature and a conduction solution method.The velocity measurements were made using a two component,LDA system.The heat transfer results from the discs show differences between the two builds.This is attributed to the wider annular gap allowing more of the throughflow to penetrate into the cavity.There are also significant differences between the radial distributions of tangential velocity in the two builds of the test rig.For the narrow annular gap,there is an increase of non-dimensional tangential velocity V/Ωr with radial location to solid body rotation V/Ωr=1.For the wider annular gap,the non-dimensional velocities show a decrease with radial location to solid body rotation. 相似文献
16.
Abnormal Shape Mould Winding 总被引:1,自引:0,他引:1
Fu Hongya Wang Xianfeng Han Zhenyu Fu Yunzhong 《中国航空学报》2007,20(6):552-558
为解决网格化芯模的缠绕问题,本文提出了复合材料面片缠绕机理;接着详细分析了面片缠绕过程中的芯模凹曲面上纤维滑线和架空现象,应用微分几何曲面理论和空间几何理论,提出判据及其解决方案;最后,针对飞机发动机进气道的缠绕成型,编制缠绕控制程序并进行相应的实验,验证了面片缠绕方法的可行性。 相似文献
17.
18.
19.
航天器返回地球的气动特性综述 总被引:4,自引:0,他引:4
航天器返回地球的飞行过程中,气动特性是实现将宇宙飞行速度减到落地前速度、保证再入飞行得到有效控制以及再入防热安全可靠的关键因素。针对简单旋成体气动外形、半弹道式再入控制、烧蚀防热类返回航天器,综述了返回地球过程中变化的空气流域特性、航天器周围的气体绕流环境、空气与航天器作用产生的动力学与热效应等。系统地给出了该类航天器的再入气动特性参数与飞行性能的共性规律,包括:气动阻力与再入减速、气动升力与再入轨迹控制、配平攻角与飞行稳定性、气动加热与防热,以及再入过程中不同气动特性航天器、气象条件变化等对再入飞行性能的影响规律。为航天器开展返回飞行过程的跨流域气动性能工程研制提供设计参考。 相似文献
20.
基于马赫数分布可控曲面外/内锥形基准流场的前体/进气道一体化设计 总被引:4,自引:1,他引:3
提出了一种高超声速飞行器乘波前体的外锥形基准流场设计方法,在锥面马赫数分布规律给定的条件下,通过有旋特征线法实现反设计,提高了基准流场设计的灵活性。该基准流场通过锥形"下凹"弯曲激波和波后等熵压缩波系压缩气流,可以在较短的长度内完成高效压缩。基于反正切马赫数分布外锥形基准流场设计的乘波前体具有较高的容积率,乘波特性良好且出口均匀,设计点时有黏升阻比为1.89。另外,基于该乘波前体和马赫数分布可控的内收缩进气道给出了一种双乘波的前体与进气道一体化设计方案,实现了内外流分别独立乘波,充分发挥了乘波前体和内收缩进气道的各自优势。 相似文献