大型民用客机管制与监视系统验证与测试平台的构建

目的在于研发大型民用客机航路管制与监视系统验证与测试平台,以实现机地数据通信系统环境下的航路管制与监视信息的数据地面接收和处理;同时,依照现有的空管航路管制与监视功能的国际标准和相关区域的运行要求,实现地面管制系统向机载系统的数据发布。该项研究成果能对口飞机机载数据链相关的ATC(Air Traffic Control空中交通管制)功能和部分监视功能ADS-C(Automatic Dependent Surveillance-Contract合同式自动相关监视)、ADS-B(Automatic Dependent Surveillance-Broadcast广播式自动相关监视),提供对应的地面收发端,监控机载系统数据状态。该成果可以配合飞机研发过程中的试验和排故,并为适航验证工作提供有力的准备和支持。     

大型民用客机管制与监视系统验证及测试平台的构建

研发大型民用客机航路管制与监视系统验证及测试平台,从而实现机地数据通信系统环境下的航路管制与监视信息的数据地面接收和处理;同时,依照现有的空管航路管制与监视功能的国际标准和相关区域的运行要求,实现地面管制系统向机载系统的数据发布。该项研究成果能对口飞机机载数据链相关的ATC(Air Traffic Control,空中交通管制)功能和部分监视功能ADS-C(Automatic Dependent Surveillance-Contract,合同式自动相关监视)、ADS-B(Automatic Dependent Surveillance-Broadcast,广播式自动相关监视),提供对应的地面收发端,监控机载系统数据状态。     

自动相关监视系统信息传输性能分析方法及测试平台构建

本研究目的在于提出一种在民用飞机机载自动相关监视系统(Automatic Dependent Surveillance,简称ADS)系统设计和试验过程中实时/非实时检测该系统端到端信息传输性能的分析方法,并进行相应的地面测试平台搭建设计。对口于飞机的机载系统,ADS监视系统信息传输性能分析平台能够快速准确定位ADS系统的试验故障,实现有效的排故和分析,直观地评估自相关监视系统的工作状态。这项研究的结果有助于推动机载合同式自动相关监视系统(Automatic Dependent Surveillance-Contract,简称ADS-C)和广播式自动相关监视系统(Automatic Dependent Surveillance-Broadcast,简称ADS-B)机上地面功能试验、民机机上地面试验、民机飞行试验等各项工作的开展。该平台在飞机交付以后,也有利于维护工作与客户支持工作的进行。     

飞机维护信息产生逻辑的解析

目前飞机故障诊断领域的研究多从飞机故障数据起始,对飞机故障如何产生和处理少有涉及。若缺乏对源头数据的分析,很难将故障诊断模型与机载故障触发逻辑有效匹配。为此,提出要采取飞机故障诊断模型和机载系统设计思路相吻合的故障诊断模型设计方法,对机载系统的故障产生逻辑和处理方法进行了解析,为下一步故障诊断奠定基础。     

Demonstration of MLS advanced approach techniques

Instrument approach designs and flight-test results using the microwave landing system (MLS) are presented. A general-aviation aircraft was flown on linear computed centerline and curved approach paths with MLS guidance displayed on basic course-deviation indicator and horizontal situation indicator instruments. Approach performance was documented using a ground tracker system, recording three-dimensional position information. These tests demonstrated the flyability of such advanced paths with basic cockpit instrumentation     

A Nonlinear Tracker Using Attitude Measurements

The subject of this paper involves tracking the present position of a maneuvering aircraft as well as predicting its future position. A tracking filter is developed that uses aircraft attitude angles (yaw, pitch, roll) in addition to the usual radar measurements. Computer simulation of tracker performance when tracking violently maneuvering aircraft indicates that a dramatic improvement is obtained by using attitude information. The approach taken is to develop a 12-or 15-state extended Kalman filter that models both translational and rotational degrees of freedom. By measuring and estimating attitude it is possible to approximately determine the magnitude and direction of the force system acting on the vehicle and therefore determine vehicle linear acceleration. Knowledge of acceleration is then used to improve the estimate of present and future position of the vehicle being tracked. Simulation of a T-38 aircraft performing a 5 g turn indicates that the new tracker produces maximum trajectory prediction errors that are 36 percent of the errors experienced by more conventional trackers.     

High gain airborne antenna for satellite communications

The performance of an airborne phased-array antenna, which was developed and evaluated onboard a commercial aircraft using the Engineering Test Satellite V (ETS-V), is reported. The system requirements and the antenna configuration that satisfies them are described. The radiation pattern, gain and axial ratio, noise temperature and ratio of gain to noise temperature, and environmental characteristics are presented. The results obtained by the flight experiments demonstrate that the performance of the antenna is the same as that on the ground, so that the antenna is suitable for installation in an aircraft for satellite communications     

某型飞机导弹靶试航迹测量的论证与实施

论述了空中靶试遥测改装方案的可靠性、安全性、可操作性及测试原理 ,对代用天线与测试设备天线使用频段的兼容性进行了对比分析。某型导弹靶试项目是某机种首次进行的空中试验任务 ,是提升我军战斗能力 ,武器国产化能力的一个重要项目。为保证此项目的完成 ,需对武器发射后的运行轨迹、击中目标后的精度进行遥测。为了保证测试任务的完成 ,相关专家对机上加装的遥测设备进行了充分的论证 ,保证了靶试成功。     

单一飞行员驾驶模式技术

飞机驾驶机组由20世纪50年代的5乘员驾驶模式减少到了目前的双乘员，然而为了降低航空公司运营成本以及减少双乘员认知不同、操作不一致所带来的安全性隐患，开展了单一飞行员驾驶（SPO）模式研究，SPO是新一代商用飞机发展方向核心技术之一。单一飞行员驾驶模式是描述面向商用飞机单一驾驶员、驾驶舱智能自动系统以及地面航空公司操作员协同实现的飞行驾驶模式。本文首先对单一飞行员驾驶模式系统组成及其系统架构进行了描述，并对比分析了单一飞行员驾驶模式下飞行员、空管系统、航空公司三方协同过程与现有模式的差异点；然后，针对商用飞机主要飞行过程，建立了单一飞行员驾驶模式下各飞行过程组织架构；最后，搭建了面向SPO的远程操控演示验证系统，经过飞行员操作评价，基本可以获取到机上操作所具备的驾驶感受，同时对于飞行计划更改、紧急情况处理等方面更为便利。通过上述内容研究，为中国商用飞机开展单一飞行员驾驶发展奠定了一定的技术基础。     

Estimation of Aircraft Target Motion Using Orientation Measurements

A new approach to estimating motion of a highly maneuverable aircraft target in an air-to-air tracking scenario is presented. An interactive filter system is developed that provides an improved estimate of target motion states by conditioning kinematic filter estimates on target aspect angle data. Pattern recognition techniques used with an electrooptical tracker are presumed to provide this target aspect information. A target orientation filter processes the aspect angle measurements by statistically weighting measured aspect angles with the current best estimate of target kinematics. The aerodynamic lift equation is used to relate approximate angle of attack to target velocity and acceleration. A novel statistical model for aircraft target normal acceleration is also developed to represent better the unknown target accelerations. Simulation results of realistic three-dimensional scenarios are presented to evaluate the performance of the interactive filter system.     

A Novel Onboard-gateway-based Mechanism to Improve TCP Performance in Aeronautical Satellite Networks

The IP-based networks on aircraft serve to support Internet services via satellites. However, in aeronautical satellite hybrid net- works,the TCP protocol performance often deteriorates due to improper decreases and slow recovery of the congestion window. This paper proposes a window size determination and notification mechanism, onboard-gateway-based mechanism (OGBM), which is based on the onboard gateway in the networks on aircraft. A cross-layer approach is adopted by the onboard gateway to obtain the satellite link bandwidth information. And then, by the gateway, through changing the receiver’s advertised window field in ACK packets, TCP sources are notified of the window size of each TCP source calculated on the ground of bandwidth delay product and flow numbers. The mechanism is able to avoid improper changes of TCP window and serve multiple users. Simulation results show that the mechanism with the fairness index close to 1 improves TCP performance in aeronautical satellite networks.     

民用飞机短舱防冰系统冻雾天试验方法研究

基于民航25部适航规章1093(b)(2)条款民用飞机短舱防冰系统在冻雾天环境中的性能要求,通过构建开放式结冰条件模拟装置,对民用飞机短舱防冰系统在特定的地面冻雾条件下的性能进行了验证,并在真实的航空发动机运转条件下进行适航验证试验,详细给出了民用飞机短舱防冰系统地面冻雾天试验的方法。结果表明:试验方案科学合理,试验方法符合短舱防冰系统对民航25部适航规章的要求,并在某型飞机上得到成功应用。该试验方法可为其他型号飞机地面冻雾天试验提供参考。     

反推力系统适航设计与符合性验证分析

现代涡喷飞机大多设计有反推力系统以提高飞机的经济性、可用性和安全性,然而反推力系统若发生故障则可能引发灾难性的飞行事故。因此,反推力系统的设计和适航符合性验证已成为适航当局重点关注的审定问题。本文通过对中、美、欧适航当局反推力系统的相关适航标准、咨询通告和修正案的研究,给出涡喷飞机反推力系统的适航要求和简析,反推力系统"操纵性"和"可靠性"验证思路及注意事项;此外,结合某型飞机的反推力系统,给出"可靠性"验证思路的实例验证过程和符合性结论。研究结果可为我国进行飞机反推力系统适航设计和符合性验证提供有益参考。     

K8V变稳飞机飞行试验验证系统

介绍了Ｋ８Ｖ变稳飞机飞行试验验证系统的组成及功能,分别阐述了该系统的飞控软件综合验证子系统、机上地面试验数据采集与处理子系统和飞行试验数据处理分析子系统等三部分的组成、工作原理、以及在飞行试验各个阶段的不同特点和作用。通过Ｋ８Ｖ变稳飞机飞行试验的应用,表明该系统能够满足变稳飞机的软件维护、系统验收试飞及后续的应用研究,具有实时,快速,准确,自动化等优点,可为Ｋ８Ｖ变稳飞机应用研究提供重要的支持手段     

A Decision?Directed Adaptive Tracker

In the design of a tracking filter for air traffic control (ATC) applications, a maneuvering aircraft can be modelled by a linear system with random noise accelerations. A Kalman filter tracker, designed on the basis of a variance chosen according to the distribution of the potential maneuver accelerations, will maintain track during maneuvers and provide some improvement in position accuracy. However, during those portions of the flight path where the aircraft is not maneuvering, the tracking accuracy will not be as good as if no acceleration noise had been allowed in the tracking filter. In this paper, statistical decision theory is used to derive an optimal test for detecting the aircraft maneuver; a more practical suboptimal test is then deduced from the optimal test. As long as no maneuver is declared, a simpler filter, based on a constant-velocity model, is used to track the aircraft. When a maneuver is detected, the tracker is reinitialized using stored data, up-dated to the present time, and then normal tracking is resumed as new data arrives. In essence, the tracker performs on the basis of a piecewise linear model in which the breakpoints are defined on-line using the maneuver detector. Simulation results show that there is a significant improvement in tracking capability using the decision-directed adaptive tracker.     

基于联合仿真的飞机空调系统故障影响

飞机空调系统是飞机的重要组成部分,由于其在飞行过程中环境和工作参数变化较大,易于受到多种因素的影响而成为故障率较高的飞机系统之一。飞机空调系统故障主要发生在飞行过程中,在地面状态难以复现,因此基于联合仿真的飞机空调系统故障影响分析对飞机设计验证和地面维修具有重要意义。首先根据飞机空调系统原理建立了冲压空气进气口模型、发动机压气机模型、压力调节与预冷组件模型、制冷组件模型;然后基于AMESim-Simulink联合仿真平台,模拟飞行过程中空调系统组件性能动态变化过程;最后对典型故障如预冷器泄漏、预冷器空气活门卡死、压力传感器冲击、冲压空气进气作动筒卡死等故障进行模拟,再现了飞行过程中空调系统故障情况,分析了空调组件性能的变化过程。     

Design of a modern pitch pointing control system

The development of a pitch pointing control system for an advanced high performance fighter aircraft using eigenstructure assignment and command generator tracking schemes is presented. A desired eigenstructure is first chosen to achieve a desired decoupling (i.e., pitch attitude and flight path angle), and to obtain a desired damping and rise time. The command generator tracker is next used to ensure zero steady-state error-to-step commands. The stability robustness to the parameter variations of the closed-loop system is evaluated in the sense of the conditioning of the achieved eigenstructure by using singular value analysis technique. The analysis and synthesis techniques for the pitch pointing control system are illustrated by applying the techniques to F-15 aircraft as a part of the NASA/USAF program named ACTIVE (Advanced Controls for integrated Vehicles)     

机载数据链通信系统综合调研、分析与设计考虑

旨在对机载数据链通信系统进行综合性调研,并且对各种主要的系统架构进行分析,通过这些过程,形成对系统设计的支持。对机载数据链通信系统的调研内容覆盖:系统的发展历史、设计实现和可应用的条款和规范。另外,还介绍了通信导航监视/ 空中交通管理(Communication Navigation Surveillance/ Air Traffic Management,简称CNS/ ATM)概念,并对其中与机载数据链相关的技术进行了分析。最后,阐述了针对民机机载数据链通信系统设计要点的考虑。     

基于Python的激光跟踪仪设站优化系统的开发

采用Python语言结合DAKOTA优化平台的方案,按照面向对象的编程思想,成功地开发了激光跟踪仪设站优化系统。实现了在使用激光跟踪仪对飞机装配型架测量安装前,预先对设站位置优化,找出最佳设站位置。从而避免因设站位置不佳而造成不必要的转站,提高了测量安装精度。     

数字化测量技术在N5B骨架总装焊接制造中的运用

通过采用数字化测量安装系统在NSB飞机机身钢构架总焊接架安装中的应用,简要地介绍了激光跟踪仪测量安装系统的工作原理及其用途,同时对本系统在焊接工装安装测量上的应用,以及工装制造工艺如何适应系统特点的问题进行了较为详细的论述。对运用于该工装上的自制辅助测量工具的设计原理和使用方式也作了简单的介绍。