共查询到20条相似文献,搜索用时 46 毫秒
1.
一种改进的LMS算法及其在自适应消噪中的应用 总被引:3,自引:0,他引:3
介绍了一种改进的LMS自适应滤波算法及其在自适应噪声对消中的应用。该算法利用误差信号的相关值去调节步长,解决了算法收敛时间与稳态误差间的矛盾,为实际应用提供了更大的灵活性。它同时实现了均方误差小和收敛速度快,并且降低了LMS算法对噪声的敏感性。文中最后给出了仿真结果,仿真结果与理论分析是一致的。 相似文献
2.
介绍了一种基于均方误差估计的新变步长LMS自适应滤波算法。与传统的LMS算法相比,该算法具有较快的收敛速度和较小的稳态失调。将该算法应用于自适应噪声对消系统的仿真中,给出了计算机仿真结果,仿真结果与理论分析一致,证明了新算法的优越性。 相似文献
3.
针对标准粒子滤波算法诊断步数多且诊断结果噪声水平高的问题,提出伪协方差和自适应似然分布结合的改进粒子滤波算法。该算法通过使用伪协方差代替了粒子集协方差,保证采样得到的粒子能够更真实地反映突变情况,减少诊断步数;通过对似然分布自适应调整,增加其与先验分布的重叠区域,提高抽样率,增加有效粒子数,降低诊断结果噪声水平。发动机健康参数估计仿真结果表明:与标准粒子滤波算法相比,改进的粒子滤波算法能使诊断速度提高约27%,诊断精度提高约38%,有效地减少了突变故障的诊断步数,并显著降低了诊断结果的噪声水平。 相似文献
4.
5.
研究了自适应参数谱估计的基本原理,提出了基于最小均方误差(MMSE)准则的LMS格型滤波算法实现自适应参数谱估计的方法。通过对仿真测试信号和线性调频信号的计算表明,该方法能够在改善谱分辨率的同时提高运算效率,满足遥测速变信号的处理和分析计算的要求。 相似文献
6.
低频时码授时信号在接收时,由于环境等因素的影响会导致解调得到的低频时码秒脉冲出现抖动。为减小该抖动现象对低频时码定时精度的影响,基于我国低频时码授时系统(BPC),研究并设计基于数字滤波的秒脉冲抖动平滑方法,通过仿真实验,验证分析了最小均方误差(LMS)自适应滤波算法和卡尔曼滤波算法的有效性和抖动平滑性能。结果表明,低频时码秒脉冲的抖动现象可以通过BPC 1PPS (one pulse per second)和本地1PPS之间的相位差波动情况反映;LMS自适应滤波算法和卡尔曼滤波算法对BPC 1PPS的抖动平滑处理均有明显效果,卡尔曼滤波算法的抖动平滑效果更优,但存在一定的收敛时间,LMS自适应滤波算法的滤波结果响应速度快,但抖动平滑性能受滤波器阶数的影响。所以,在实际应用中,应根据实际需求选择合适的滤波器及相关参数。 相似文献
7.
北斗导航系统发展日益成熟,介绍了北斗定位解算与GPS解算的差异,针对扩展Kalman滤波(Extended Kalman Filter,EKF)算法在北斗解算过程中容易引入非线性误差,无迹Kalman滤波(Unscented Kalman Filter,UKF)算法受初值和系统噪声影响较大问题,提出了一种自适应无迹Kalman滤波(Adaptive Unscented Kalman Filter,AUKF)北斗定位解算算法。该算法利用观测残差信息构建自适应渐消矩阵,消除量测噪声异常带来的影响,同时提高了滤波精度。实验表明,与EKF和UKF定位解算算法相比,AUKF算法在定位精度和对系统噪声鲁棒性方面都有所提高,是一种可靠稳定的北斗定位算法。 相似文献
8.
在建立车载组合导航系统联合滤波模型及算法的基础上,定义了联合滤波模型融合信息在各子滤波器中的分配准则; 实现了联合滤波模型信息分配系数的自适应调节; 理论分析和计算机仿真结果均表明,引入该准则的自适应联合滤波模型及算法大大提高了系统容错性和定位精度 相似文献
9.
10.
在室内移动定位系统中,由于待定位节点易受统计特性未知的噪声干扰影响,采用Kalman滤波和粒子滤波等经典的噪声抑制方法,已无法有效满足室内定位精度不断提升的要求。针对这一问题,提出了一种基于事件触发的集员滤波室内移动定位算法。首先,针对基于接收信号强度指数(RSSI)测距误差导致传统三边定位算法无法获取可行解的问题,提出了一种椭圆三边定位算法;其次,考虑待定位节点的移动性,为了提高定位精度,提出了一种锚节点自主切换算法;最后,针对噪声统计特性未知的情形,考虑使用带有事件触发机制的集员滤波算法来估计待定位节点位置。通过仿真实验验证了所提方法的有效性。 相似文献
11.
基于飞机油箱模型形状特征油量测量切片步长选择方法研究 总被引:1,自引:0,他引:1
在分析飞机数字式油量测量过程中目前广泛使用的切片法油量测量原理的基础上,针对现有的定步长切片法无法得到准确、可靠的燃油质量特性数据库的缺陷,结合对飞机油箱模型形状特征的分析,提出了基于飞机油箱模型形状特征的油量测量切片步长选择方法。此方法包括切片步长整体和局部选择两个过程,整体选择以实现相邻两切片平面所夹油箱模型体积近似相等为目的来确定切片步长,以体现油箱模型截面整体变化规律;局部选择以设计切片平面与截面突变平面重合或尽可能接近的方式,突出油箱截面的局部变化特征。实验结果表明:该切片步长选择方法较定步长方法能够建立更为合理、可靠的燃油质量特性数据库,从而提高了油量测量精度。 相似文献
12.
The effect of inlet conditions on the flow and heat transfer in multiple rotating cavity with axial throughflow 总被引:1,自引:0,他引:1
This paper discusses experimental results from two different build configurations of a heated multiple rotating cavity test rig.Measurements of heat transfer from the discs and tangential velocities are presented.The test rig is a 70% full scale version of a high pressure compressor stack of an axial gas turbine engine.Of particular interest are the internal cylindrical cavities formed by adjacent discs and the interaction of these with a central axial throughflow of cooling air.Tests were carried out for a range of non-dimensional parameters representative of high pressure compressor internal air system flows(Re up to 5×106 and Rez up to 2×105).Two different builds have been tested.The most significant difference between these two build configurations is the size of the annular gap between the(non-rotating) drive shaft and the bores of the discs.The heat transfer data were obtained from thermocouple measurements of surface temperature and a conduction solution method.The velocity measurements were made using a two component,LDA system.The heat transfer results from the discs show differences between the two builds.This is attributed to the wider annular gap allowing more of the throughflow to penetrate into the cavity.There are also significant differences between the radial distributions of tangential velocity in the two builds of the test rig.For the narrow annular gap,there is an increase of non-dimensional tangential velocity V/Ωr with radial location to solid body rotation V/Ωr=1.For the wider annular gap,the non-dimensional velocities show a decrease with radial location to solid body rotation. 相似文献
13.
14.
Abnormal Shape Mould Winding 总被引:1,自引:0,他引:1
Fu Hongya Wang Xianfeng Han Zhenyu Fu Yunzhong 《中国航空学报》2007,20(6):552-558
为解决网格化芯模的缠绕问题,本文提出了复合材料面片缠绕机理;接着详细分析了面片缠绕过程中的芯模凹曲面上纤维滑线和架空现象,应用微分几何曲面理论和空间几何理论,提出判据及其解决方案;最后,针对飞机发动机进气道的缠绕成型,编制缠绕控制程序并进行相应的实验,验证了面片缠绕方法的可行性。 相似文献
15.
16.
航天器返回地球的气动特性综述 总被引:4,自引:0,他引:4
航天器返回地球的飞行过程中,气动特性是实现将宇宙飞行速度减到落地前速度、保证再入飞行得到有效控制以及再入防热安全可靠的关键因素。针对简单旋成体气动外形、半弹道式再入控制、烧蚀防热类返回航天器,综述了返回地球过程中变化的空气流域特性、航天器周围的气体绕流环境、空气与航天器作用产生的动力学与热效应等。系统地给出了该类航天器的再入气动特性参数与飞行性能的共性规律,包括:气动阻力与再入减速、气动升力与再入轨迹控制、配平攻角与飞行稳定性、气动加热与防热,以及再入过程中不同气动特性航天器、气象条件变化等对再入飞行性能的影响规律。为航天器开展返回飞行过程的跨流域气动性能工程研制提供设计参考。 相似文献
17.
Research on Auto-detection for Remainder Particles of Aerospace Relay Based on Wavelet Analysis 总被引:2,自引:0,他引:2
GAO Hong-liang ZHANG Hui WANG Shu-juan 《中国航空学报》2007,20(1):75-80
Aerospace relay is one kind of electronic components which is used widely in national defense system and aerospace system. The existence of remainder particles induces the reliability declining, which has become a severe problem in the development of aerospace relay. Traditional particle impact noise detection (PIND) method for remainder detection is ineffective for small particles, due to its low precision and involvement of subjective factors. An auto-detection method for PIND output signals is proposed in this paper, which is based on direct wavelet de-noising (DWD), cross-correlation analysis (CCA) and homo-filtering (HF), the method enhances the affectiv-ity of PIND test about the small particles. In the end, some practical PIND output signals are analysed, and the validity of this new method is proved. 相似文献
18.
19.
Effects of Mo on the Microstructure and Hydrogen Sorption Properties of Ti-Mo Getters 总被引:1,自引:0,他引:1
ZHOU Hong-guo WEI Xiu-ying MAO Chang-hui XIONG Yu-hua QIN Guang-rong 《中国航空学报》2007,20(2):172-176
The effects of Mo on the microstructure evolution, porosity and hydrogen sorption properties of Ti-Mo getters are investigated in this work. The results show that the addition of Mo prolongs the densification process of Ti-Mo getters and results in a significant amount of sintered pores. With the Mo content increasing, the porosity of getters firstly increases reaching the maximum value as it at- tains about 7.5wt.%, and then drops. At the room temperature, the hydrogen sorption property of getters increases progressively with the Mo content increasing, but the tendency is not very clear before its content lies below 2.5wt.%. When the Mo content achieves about 7.5wt.%, the hydrogen sorption property proves to be the best. The discussion is made about the above mentioned phenomena inclusive of hydrogen sorption properties of getters under different activation conditions (from 500-750 ℃). 相似文献
20.
YANG Fen ZHANG Xue-jun TIAN Fang WU Xu GAN Fu-xing 《中国航空学报》2007,20(2):181-186
Antimony-doped tin hydroxide colloid precipitates have been synthesized by hydrolysis of SnCl4 and SbCl3 using: (1) an ion-exchange hydrolysis to remove chlorine ions, and (2) isoamyl acetate as an azeotropic solvent to obviate water. The obtained dried powder is of high dispersivity without any need for further grinding. The size and dispersivity of the final particles are investigated with the aid of TG-DTA, BET, XRD and TEM. After having calcined, the antimony-doped tin oxide nanopowder possesses a tetragonal rutile structure with high dispersivity, uniform particles and low hard agglomeration. 相似文献