Remaining useful life estimation for deteriorating systems with time-varying operational conditions and condition-specific failure zones

Dynamic time-varying operational conditions pose great challenge to the estimation of system remaining useful life (RUL) for the deteriorating systems. This paper presents a method based on probabilistic and stochastic approaches to estimate system RUL for periodically moni-tored degradation processes with dynamic time-varying operational conditions and condition-specific failure zones. The method assumes that the degradation rate is influenced by specific oper-ational condition and moreover, the transition between different operational conditions plays the most important role in affecting the degradation process. These operational conditions are assumed to evolve as a discrete-time Markov chain (DTMC). The failure thresholds are also determined by specific operational conditions and described as different failure zones. The 2008 PHM Conference Challenge Data is utilized to illustrate our method, which contains mass sensory signals related to the degradation process of a commercial turbofan engine. The RUL estimation method using the sensor measurements of a single sensor was first developed, and then multiple vital sensors were selected through a particular optimization procedure in order to increase the prediction accuracy. The effectiveness and advantages of the proposed method are presented in a comparison with exist-ing methods for the same dataset.     

多传感器监测飞机部件非线性退化评估

飞机部件一般采用多传感器进行状态监控,针对退化过程具有非线性特征的民机典型部件剩余寿命（RUL）预测及评估问题,首先建立了部件性能参数的一般非线性Wiener退化过程,推导出基于多传感器监测数据的剩余寿命预测框架和概率密度函数,随后利用状态空间模型进行隐退化状态估计并同时利用最大期望算法（EM）实现参数递推估计,最后形成了飞机部件多传感器监测下的剩余寿命非线性退化评估方法。通过数值仿真案例和民航发动机剩余寿命预测案例,对比线性退化模型和基于单一传感器监测数据的非线性退化模型,验证了所提方法在提高剩余寿命预测精度的有效性,可为飞机及其部件的剩余使用寿命预测和视情维护决策提供技术支撑。     

基于非线性Wiener过程的航空发动机性能衰减建模与剩余寿命预测

针对航空发动机在性能衰减过程中普遍存在的非线性和三源不确定性问题,提出了一种基于非线性Wiener过程的航空发动机性能衰减建模与剩余寿命（RUL）预测方法。首先,为解决目前大多数剩余寿命预测方法中潜在假设的局限性,即当前时刻估计的漂移系数与上一时刻漂移系数的后验估计完全相等,在状态空间模型的框架下建立了一类新的同时考虑非线性和三源不确定性的性能衰减模型,并在首达时间下推导出剩余寿命的分布。然后,针对新研发航空发动机缺乏历史数据和先验信息的问题,提出了一种基于Kalman滤波和条件期望最大化（ECM）算法的参数估计方法,使得估计的模型参数不依赖于历史数据量。同时能够在获得一个新的性能衰减数据后,实现对模型参数的自适应估计和在线更新,进而实时地更新航空发动机的剩余寿命分布。实验结果表明,本文方法可以有效地提高剩余寿命预测的准确性,能为航空发动机的维修决策提供可靠的依据。     

Remaining useful life prognostics for aeroengine based on superstatistics and information fusion

Remaining useful life（RUL） prognostics is a fundamental premise to perform conditionbased maintenance（CBM） for a system subject to performance degradation. Over the past decades,research has been conducted in RUL prognostics for aeroengine. However, most of the prognostics technologies and methods simply base on single parameter, making it hard to demonstrate the specific characteristics of its degradation. To solve such problems, this paper proposes a novel approach to predict RUL by means of superstatistics and information fusion. The performance degradation evolution of the engine is modeled by fusing multiple monitoring parameters, which manifest non-stationary characteristics while degrading. With the obtained degradation curve,prognostics model can be established by state-space method, and then RUL can be estimated when the time-varying parameters of the model are predicted and updated through Kalman filtering algorithm. By this method, the non-stationary degradation of each parameter is represented, and multiple monitoring parameters are incorporated, both contributing to the final prognostics. A case study shows that this approach enables satisfactory prediction evolution and achieves a markedly better prognosis of RUL.     

An adaptive-order particle filter for remaining useful life prediction of aviation piston pumps

An accurate estimation of the remaining useful life (RUL) not only contributes to an effective application of an aviation piston pump, but also meets the necessity of condition based maintenance (CBM). For the current RUL evaluation methods, a model-based method is inappropriate for the degradation process of an aviation piston pump due to difficulties of modeling, while a data-based method rarely presents high-accuracy prediction in a long period of time. In this work, an adaptive-order particle filter (AOPF) prognostic process is proposed aiming at improving long-term prediction accuracy of RUL by combining both kinds of methods. A dynamic model is initialized by a data-driven or empirical method. When a new observation comes, the prior state distribution is approximated by a current model. The order of the current model is updated adaptively by fusing the information of the observation. Monte Carlo simulation is employed for estimating the posterior probability density function of future states of the pump’s degradation. With updating the order number adaptively, the method presents a higher precision in contrast with those of traditional methods. In a case study, the proposed AOPF method is adopted to forecast the degradation status of an aviation piston pump with experimental return oil flow data, and the analytical results show the effectiveness of the proposed AOPF method.     

Remaining useful life prediction based on variation coefficient consistency test of a Wiener process

High-cost equipment is often reused after maintenance, and whether the information before the maintenance can be used for the Remaining Useful Life (RUL) prediction after the maintenance is directly determined by the consistency of the degradation pattern before and after the maintenance. Aiming at this problem, an RUL prediction method based on the consistency test of a Wiener process is proposed. Firstly, the parameters of the Wiener process estimated by Maximum Likelihood Estimation (MLE) are proved to be biased, and a modified unbiased estimation method is proposed and verified by derivation and simulations. Then, the h statistic is constructed according to the reciprocal of the variation coefficient of the Wiener process, and the sampling distribution is derived. Meanwhile, a universal method for the consistency test is proposed based on the sampling distribution theorem, which is verified by simulation data and classical crack degradation data. Finally, based on the consistency test of the degradation model, a weighted fusion RUL prediction method is presented for the fuel pump of an airplane, and the validity of the presented method is verified by accurate computation results of real data, which provides a theoretical and practical guidance for engineers to predict the RUL of equipment after maintenance.     

Satellite lithium-ion battery remaining useful life estimation with an iterative updated RVM fused with the KF algorithm

Lithium-ion batteries have become the third-generation space batteries and are widely utilized in a series of spacecraft. Remaining Useful Life (RUL) estimation is essential to a spacecraft as the battery is a critical part and determines the lifetime and reliability. The Relevance Vector Machine (RVM) is a data-driven algorithm used to estimate a battery’s RUL due to its sparse feature and uncertainty management capability. Especially, some of the regressive cases indicate that the RVM can obtain a better short-term prediction performance rather than long-term prediction. As a nonlinear kernel learning algorithm, the coefficient matrix and relevance vectors are fixed once the RVM training is conducted. Moreover, the RVM can be simply influenced by the noise with the training data. Thus, this work proposes an iterative updated approach to improve the long-term prediction performance for a battery’s RUL prediction. Firstly, when a new estimator is output by the RVM, the Kalman filter is applied to optimize this estimator with a physical degradation model. Then, this optimized estimator is added into the training set as an on-line sample, the RVM model is re-trained, and the coefficient matrix and relevance vectors can be dynamically adjusted to make next iterative prediction. Experimental results with a commercial battery test data set and a satellite battery data set both indicate that the proposed method can achieve a better performance for RUL estimation.     

Remaining useful life prediction of aircraft lithium-ion batteries based on F-distribution particle filter and kernel smoothing algorithm

As an emergency and auxiliary power source for aircraft, lithium (Li)-ion batteries are important components of aerospace power systems. The Remaining Useful Life (RUL) prediction of Li-ion batteries is a key technology to ensure the reliable operation of aviation power systems. Particle Filter (PF) is an effective method to predict the RUL of Li-ion batteries because of its uncertainty representation and management ability. However, there are problems that particle weights cannot be updated in the prediction stage and particles degradation. To settle these issues, an innovative technique of F-distribution PF and Kernel Smoothing (FPFKS) algorithm is proposed. In the prediction stage, the weights of the particles are dynamically updated by the F kernel instead of being fixed all the time. Meanwhile, a first-order independent Markov capacity degradation model is established. Moreover, the kernel smoothing algorithm is integrated into PF, so that the variance of the parameters of capacity degradation model keeps invariant. Experiments based on NASA battery data sets show that FPFKS can be excellently applied to RUL prediction of Li-ion batteries.     

A new remaining useful life estimation method for equipment subjected to intervention of imperfect maintenance activities

As the key part of Prognostics and Health Management (PHM), Remaining Useful Life (RUL) estimation has been extensively investigated in recent years. Current RUL estimation studies considering the intervention of imperfect maintenance activities usually assumed that maintenance activities have a single influence on the degradation level or degradation rate, but not on both. Aimed at this problem, this paper proposes a new degradation modeling and RUL estimation method taking the influence of imperfect maintenance activities on both the degradation level and the degradation rate into account. Toward this end, a stochastic degradation model considering imperfect maintenance activities is firstly constructed based on the diffusion process. Then, the Probability Density Function (PDF) of the RUL is derived by the convolution operator under the concept of First Hitting Time (FHT). To implement the proposed RUL estimation method, the Maximum Likelihood Estimation (MLE) is utilized to estimate the degradation related parameters based on the Condition Monitoring (CM) data, while the Bayesian method is utilized to estimate the maintenance related parameters based on the maintenance data. Finally, a numerical example and a practical case study are provided to demonstrate the superiority of the proposed method. The experimental results show that the proposed method could greatly improve the RUL estimation accuracy for the degrading equipment subjected to imperfect maintenance activities.     

多退化变量下基于Copula函数的陀螺仪剩余寿命预测方法

针对惯性导航系统中陀螺仪多退化变量条件下的剩余寿命（RUL）预测问题,提出了一种基于Copula函数的多退化变量剩余寿命预测方法。首先,针对退化变量间不同的退化轨迹,采用不同的方法进行退化建模,并对于陀螺漂移系数样本标准差数据波动性随时间递增的特性,提出了一种方差时变的正态随机过程退化建模方法,得到了陀螺仪剩余寿命的边缘分布函数。然后,通过Copula函数来描述退化变量之间的相关性,将得到的剩余寿命的边缘分布进行融合,得到了陀螺仪剩余寿命的联合分布函数。最后,通过陀螺仪实例分析验证了方法的适用性和可行性。     

A geographical and operational deep graph convolutional approach for flight delay prediction

Flight delay prediction has attracted great interest in civil aviation community due to its significant role in airline planning, flight scheduling, airport operation, and passenger service. Flight delay is affected by numerous factors and irregularly propagates in air transportation networks owing to flight connectivity, which brings critical challenges to accurate flight delay prediction. In recent years, Graph Convolutional Networks (GCNs) have become popular in flight delay prediction due to the advantage in extracting complicated relationships. However, most of the existing GCN-based methods have failed to effectively capture the spatial–temporal information in flight delay prediction. In this paper, a Geographical and Operational Graph Convolutional Network (GOGCN) is proposed for multi-airport flight delay prediction. The GOGCN is a GCN-based spatial–temporal model that improves node feature representation ability with geographical and operational spatial–temporal interactions in a graph. Specifically, an operational aggregator is designed to extract global operational information based on the graph structure, while a geographical aggregator is developed to capture the similar nature among spatially close airports. Extensive experiments on a real-world dataset demonstrate that the proposed approach outperforms the state-of-the-art methods with a satisfying accuracy improvement.     

A Novel PF-LSSVR-based Framework for Failure Prognosis of Nonlinear Systems with Time-varying Parameters

Particle filtering (PF) is being applied successfully in nonlinear and/or non-Gaussian system failure prognosis. However, for failure prediction of many complex systems whose dynamic state evolution models involve time-varying parameters, the traditional PF-based prognosis framework will probably generate serious deviations in results since it implements prediction through iterative calculation using the state models. To address the problem, this paper develops a novel integrated PF-LSSVR framework based on PF and least squares support vector regression (LSSVR) for nonlinear system failure prognosis. This approach employs LSSVR for long-term observation series prediction and applies PF-based dual estimation to collaboratively estimate the values of system states and parameters of the corresponding future time instances. Meantime, the propagation of prediction uncertainty is emphatically taken into account. Therefore, PF-LSSVR avoids over-dependency on system state models in prediction phase. With a two-sided failure definition, the probability distribution of system remaining useful life (RUL) is accessed and the corresponding methods of calculating performance evaluation metrics are put forward. The PF-LSSVR framework is applied to a three-vessel water tank system failure prognosis and it has much higher prediction accuracy and confidence level than traditional PF-based framework.     

基于RF-SVR的燃油计量装置性能衰退检测和剩余寿命估计方法

为了实现航空发动机燃油系统的安全状态监测和健康管理,开展了燃油系统性能衰退检测和剩余使用寿命估计方面的研究。以燃油系统燃油计量装置为例,分析了其主要的性能衰退模式,设计了基于电流-速度数据的健康指标(HIs)选取方案,并考虑环境及模型参数不确定性,进行模型不确定性仿真,基于健康数据与性能衰退数据间的马氏距离对部件性能衰退进行检测。提出了基于随机森林-支持向量回归(RF-SVR)的剩余使用寿命(RUL)估计方法,利用通过RF特征选择优化的SVR模型实现部件RUL估计。最后基于某型民用涡扇发动机机械液压模型仿真数据对该方法进行了验证,结果表明:该方法的性能衰退检测虚警率及漏报率低于2%,RUL估计误差低于3%,可为航空发动机燃油系统的预测性维护提供参考。      

Remaining useful life prediction based on the Wiener process for an aviation axial piston pump

An aviation hydraulic axial piston pump’s degradation from comprehensive wear is a typical gradual failure model. Accurate wear prediction is difficult as random and uncertain char-acteristics must be factored into the estimation. The internal wear status of the axial piston pump is characterized by the return oil flow based on fault mechanism analysis of the main frictional pairs in the pump. The performance degradation model is described by the Wiener process to predict the remaining useful life (RUL) of the pump. Maximum likelihood estimation (MLE) is performed by utilizing the expectation maximization (EM) algorithm to estimate the initial parameters of the Wiener process while recursive estimation is conducted utilizing the Kalman filter method to estimate the drift coefficient of the Wiener process. The RUL of the pump is then calculated accord-ing to the performance degradation model based on the Wiener process. Experimental results indi-cate that the return oil flow is a suitable characteristic for reflecting the internal wear status of the axial piston pump, and thus the Wiener process-based method may effectively predicate the RUL of the pump.     

机器学习辅助湍流建模在分离流预测中的应用

数据驱动湍流建模是近年来发展的提高雷诺平均N-S方程预测精度的有效手段,通过机器学习算法能够从高置信度数据中自动提取特征,建立准确的从平均流动特征到雷诺应力的预测模型。针对高雷诺数下积冰翼型绕流这一类典型的复杂流动分离问题,基于此前研究者提出的机器学习预测框架,从输入输出特征选择和翼型绕流中数据分布特性两个方面出发,对机器学习预测结果的光滑性和准确性进行改善。提出了基于雷诺应力张量分析和流动特征辨识的输入特征选择准则;提出了局部区域建模方法以及基准模型和机器学习预测模型混合的代入计算方法。将改进方法应用于积冰翼型绕流问题之中,结果表明改进的方法能够准确给出训练集和预测集上的雷诺应力结果,并且代入平均流计算可以得到和真实分布更加接近的流动和机翼表面压力分布。     

基于随机Wiener过程的航空发动机剩余寿命预测

针对目前剩余寿命(RL)预测方法没有综合考虑发动机个体性能退化的差异性和多阶段性的问题,提出了基于多阶段性能退化模型预测航空发动机剩余寿命的方法。首先,该方法采用多阶段Wiener过程对航空发动机进行退化建模,并假设退化模型参数服从随机分布来描述发动机个体的差异性。然后,根据历史性能退化数据与历史失效时间数据,利用期望最大化算法对模型参数的先验分布进行估计。当获得单台发动机的实时退化数据后,使用Bayesian方法对模型参数进行更新,从而实时更新航空发动机的RL分布,最终实现对单台航空发动机的RL预测。实验结果表明,该方法预测精度较高,能为航空发动机维修计划的制定提供依据。     

基于大数据的民用飞机未来运营模式探索

大数据作为一种新兴的IT实现方式,在深刻影响IT业变革的同时,也为航空业带来了新的发展机遇。飞机运行过程中产生的海量运营数据最能体现民机的大数据基因,基于大数据的飞机运营支援将会是其在航空产业施展拳脚的主要战场之一。首先通过对航空大数据的梳理与分析,获得运营数据的种类、结构、数据流程以及相关特点。然后结合航空公司的具体业务需求,针对飞机典型复杂系统,分别以健康监控中的故障诊断、性能退化预测以及维修辅助决策几大关键技术作为大数据应用的切入点介绍技术研究路线,利用数据挖掘、机器学习等方法识别运营数据在系统不同健康状态下的特征表达,准确预测系统退化趋势,设置风险预警模型以提前预知潜在故障,最后从工程应用角度探讨这些关键技术的大数据实现平台以及基于大数据的运营业务流程。     

Aircraft air conditioning system health state estimation and prediction for predictive maintenance

The vast potential of system health monitoring and condition based maintenance on modern commercial aircraft is being realized through the innovative use of Airplane Condition Monitoring System (ACMS) data. However there are few methods addressing the issues of failure prognostics and predictive maintenance for commercial aircraft Air Conditioning System (ACS). This study developed a Bayesian failure prognostics approach using ACMS data for predictive maintenance of ACS. First, a health index characterizing the ACS health state is inferred from a multiple sensor signals using a data driven method. Then a dynamic linear model is proposed to describe the degradation process for failure prognostics. Bayesian inference formulas are carried out for degradation estimation and prediction. The developed approach is applied on a passenger aircraft fleet with ACMS data recorded for one year. The analysis of the case study shows that the developed method can produce satisfactory prognostics results, where all the ACS failure precursors are identified in advance, and the relative errors for the failure time prediction made when just entering the degradation warning stage are less than 8%. This would allow operators to proactively plan future maintenance.     

Erosion degradation characteristics of a linear electro-hydrostatic actuator under a high-frequency turbulent flow field

The paper proposes a performance degradation analysis model based on dynamic erosion wear for a novel Linear Electro-Hydrostatic Actuator (LEHA). Rather than the traditional statistical methods based on degradation data, the method proposed in this paper firstly analyzes the dominant progressive failure mode of the LEHA based on the working principle and working conditions of the LEHA. The Computational Fluid Dynamics (CFD) method, combining the turbulent theory and the micro erosion principle, is used to establish an erosion model of the rectification mechanism. The erosion rates for different port openings, under a time-varying flow field, are obtained. The piecewise linearization method is applied to update the concentration of contaminated particles within the LEHA, in order to gain insight into the erosion degradation process at various stages of degradation. The main contribution of the proposed model is the application of the dynamic concentration of contamination particles in erosion analysis of Electro-Hydraulic Servo Valves (EHSVs), throttle valves, spool valves, and needle valves. The effects of system parameters and working conditions on component wear are analyzed by simulations. The results of the proposed model match the expected degradation process.     

Prognostic Health Management of Aircraft Power Generators

In this paper, prognostic tools are developed to detect the onset of electrical failures in an aircraft power generator, and to predict the generator's remaining useful life (RUL). Focus is on the rotor circuit since failure mode, effects, and criticality analysis (FMECA) studies indicate that it is a high priority candidate for condition monitoring. A signature feature is developed and tested by seeded fault experiments to verify that the initial stages of rotor faults are observable under diverse generator load conditions. A tracking filter is used to assess the damage state and predict generator RUL. This information helps to avoid unexpected failures while reducing the overall life-cycle cost of the system.