Attitude and orbit control systems for the LISA Pathfinder mission

The main purpose of the LISA Pathfinder mission is to provide in-orbit validation of the critical technologies necessary for LISA (Laser Interferometer Space Antenna), aiming at detecting gravitational waves generated by very massive objects such as black holes. The spacecraft consists of a Science Module (SCM) and a Propulsion Module (PRM). The former performs the science experiment, and the later provides the propulsive capability to raise the spacecraft from the injection orbit to the operational orbit at around L1 and is then separated from the former. The Spacecraft Attitude and Orbit Control System (AOCS) is actually composed of three distinct systems to fulfill the needs of the whole mission: – Composite AOCS, used to reach L1, aims at raising the Perigee through a succession of about 10 boosts performed with high thrust chemical propulsion; – Micro-propulsion AOCS takes over once the separation of the SCM from PRM has occurred and is based on micro-propulsion systems (micro-Newton electrical thrusters); – Drag-Free Attitude Control System (DFACS) is then used to perform science experiments. This article provides a comprehensive overview of the AOCS architecture, requirements, selected sensors and actuators, system design & evolution, and achieved performances. It focuses in particular on the Composite AOCS and the Micro-propulsion AOCS and will analyze the challenges of using micro-Newton electric propulsion.     

Parabolic Drag-Free Flight, Actuation with Kicks, Spectral Analysis with Gaps

The LISA Pathfinder Drift Mode is an experimental mode proposed for the LISA Pathfinder drag free space mission. The Drift Mode’s specificity is to switch off a possibly noisy actuator periodically in order to minimize the actuation noise. The experiment delivers a measurement that includes data segments virtually free of any actuation force noise. The corresponding acceleration data is then used to estimate the experiment disturbance spectrum, using a calibrating and gap-filling algorithm. This article focuses on two points to demonstrate the feasibility and interest of such an experiment: a first part is dedicated to experiment control and dynamics, whereas the second part explains how to solve the challenging problem posed by the data analysis.     

Reaching for the red planet

The distant shores of Mars were reached by numerous U.S. and Russian spacecraft throughout the 1960s to mid 1970s. Nearly 20 years have passed since those successful missions which orbited and landed on the Martian surface. Two Soviet probes headed for the planet in July, 1988, but later failed. In August 1993, the U.S. Mars Observer suddenly went silent just three days before it was to enter orbit around the planet and was never heard from again. In late 1996, there will be renewed activity on the launch pads with three probes departing for the red planet: 1) The U.S. Mars Global Surveyor will be launched in November on a Delta II rocket and will orbit the planet for global mapping purposes; 2) Russia's Mars '96 mission, scheduled to fly in November on a Proton launcher, consists of an orbiter, two small stations which will land on the Martian surface, and two penetrators that will plow into the terrain; and finally, 3) a U.S. Discovery-class spacecraft, the Mars Pathfinder, has a December launch date atop a Delta II booster. The mission features a lander and a microrover that will travel short distances over Martian territory. These missions usher in a new phase of Mars exploration, setting the stage for an unprecedented volley of spacecraft that will orbit around, land on, drive across, and perhaps fly at low altitudes over the planet.     

CLUSTER MISSION OPERATIONS

The Cluster ground segment design and mission operations concept have been defined according to the basic mission requirements, namely, to allow the transfer of the four spacecraft from the initial geostationary transfer orbit achieved at separation from the launcher into the final highly elliptical polar orbits, such that in the areas of scientific interest along their orbits, the four spacecraft will form a tetrahedral configuration with pre-defined separation distances, to be changed every six months during the mission. The Cluster mission operations will be carried out by ESA from its European Space Operations Centre; the task of merging the Principal Investigators' requests into coordinated, regular scientific mission planning inputs to ESOC will be undertaken by the Joint Science Operations Centre. The mission products will be distributed to the scientific community regularly in form of CD-ROMs. Principal Investigators will also have access to quick-look science, housekeeping telemetry and auxiliary data via an electronic network.     

Rendezvous Guidance Trajectory Shaping

The Space Station will bring a great increase in rendezvous traffic. Formerly, rendezvous has been expensive in terms of time and crew involvement. Multiple trajectory adjustments on separate orbits have been required to meet safety, lighting, and geometry requirements. This paper describes a new guidance technique in which the approach trajectory is shaped by a sequence of velocity increments in order to satisfy multiple constraints within a single orbit. The approach phase is planned before the mission, leaving a group of free parameters that are optimized by onboard guidance. Fuel penalties are typically a few percent, compared to unshaped Hohmann transfers, and total fuel costs can be less than those of more time-consuming ways of meeting the same requirements.     

MESSENGER Mission Design and Navigation

Nearly three decades after the Mariner 10 spacecraft’s third and final targeted Mercury flyby, the 3 August 2004 launch of the MESSENGER (MErcury Surface, Space ENvironment, GEochemistry, and Ranging) spacecraft began a new phase of exploration of the closest planet to our Sun. In order to ensure that the spacecraft had sufficient time for pre-launch testing, the NASA Discovery Program mission to orbit Mercury experienced launch delays that required utilization of the most complex of three possible mission profiles in 2004. During the 7.6-year mission, the spacecraft’s trajectory will include six planetary flybys (including three of Mercury between January 2008 and September 2009), dozens of trajectory-correction maneuvers (TCMs), and a year in orbit around Mercury. Members of the mission design and navigation teams optimize the spacecraft’s trajectory, specify TCM requirements, and predict and reconstruct the spacecraft’s orbit. These primary mission design and navigation responsibilities are closely coordinated with spacecraft design limitations, operational constraints, availability of ground-based tracking stations, and science objectives. A few days after the spacecraft enters Mercury orbit in mid-March 2011, the orbit will have an 80° inclination relative to Mercury’s equator, a 200-km minimum altitude over 60°N latitude, and a 12-hour period. In order to accommodate science goals that require long durations during Mercury orbit without trajectory adjustments, pairs of orbit-correction maneuvers are scheduled every 88 days (once per Mercury year).     

CLUSTER – SCIENCE AND MISSION OVERVIEW

The European Space Agency's Cluster programme is designed to study the small-scale spatial and temporal characteristics of the magnetospheric and near-Earth solar wind plasma. The programme is composed of four identical spacecraft which will be able to make physical measurements in three dimensions. The relative distance between the four spacecraft will be varied between 200 and 18000 km during the course of the mission. This paper provides a general overview of the scientific objectives, the configuration and the orbit of the four spacecraft and the relation of Cluster to other missions.     

Modeling of Thermal Perturbations Using Raytracing Method with Preliminary Results for a Test Case Model of the Pioneer 10/11 Radioisotopic Thermal Generators

Electromagnetic radiation emitted from a source carries momentum. Thus, the dissipation of waste thermal energy can produce disturbance forces on spacecraft surfaces if the energy is not dissipated in a symmetric pattern. This force can be computed for a plate element as the quotient of the radiated power in normal direction and the speed of light. Depending on mission and spacecraft design the resulting surface forces have to be included into the disturbance budget. At ZARM an elaborated method for the exact modeling of the disturbances caused by heat radiation was developed which can be used for any satellite mission with high requirements on perturbation knowledge (e.g. LISA, LISA pathfinder, MICROSCOPE). The method which will be presented in this paper is based on raytracing and finite element (FE) thermal analysis. As a demonstration of the potential of the method, preliminary results acquired with a test case model of the Pioneer 10/11 Radioisotopic Thermal Generators (RTGs) will be shown.     

Challenges in the Measurement and Data-Processing Chain of the LISA Mission

The LISA Mission (Laser Interferometer Space Antenna) is currently under mission formulation with a launch date planned in 2020. The purpose of the mission is the observation of gravitational waves at frequencies between 0.1 mHz and 1 Hz by measuring distance fluctuations between inertial reference points, represented by cubic proof masses. In order to provide a sufficient sensitivity of the instrument, distance fluctuations between two inertial reference points must be measured with a strain accuracy of around 10^?20 Hz^?1/2. This is achieved by setting up a laser interferometer with a base-length of 5?10⁶ km and a path-length measurement noise in the order of 10 pm?Hz^?1/2. For a correct evaluation of the data on the ground, it is essential that the science data telemetry preserves all required frequency domain information. That is, any on-board data-processing and down-sampling must be done with great care in order not to introduce aliasing or other artifacts into the data stream. As an additional complication, most of the optical metrology data is dominated by laser phase noise which is about eight orders of magnitude larger than the required instrument sensitivity. However, by applying a method called “time-delayed interferometry” during the ground data processing, this laser phase noise can be eliminated from the data. This method has already been demonstrated in a detailed simulation environment, but it requires a very careful filtering, synchronization, and interpolation of the individual data streams. Last but not least, a calibration of system parameters is necessary in many areas of the LISA measurement system. The system design must therefore ensure that all data required for these calibrations is available on-ground in a quality that allows a successful computation of the calibration coefficients within a reasonable time-frame. The data streams do not only include data from the optical metrology system, but also from the drag-free and attitude control system which are used to derive other information, such as the charge state of the proof mass. This yields a strong coupling between the different disciplines since data that is only used for housekeeping purposes in other missions becomes an essential part of the science data stream for the LISA mission. This paper gives an overview of the LISA measurement and data-processing chain. It highlights the most challenging areas that have been identified so far and describes the intended solution methods.     

Infrared Imaging Surveyor: IRIS

Based on the experience of the IRTS, a new infrared satellite mission, Infrared Imaging Surveyor:IRIS is now being proposed to ISAS. The IRIS will be thrown into the sun synchronous orbit at 900km altitude by the MV rocket which is now under development in ISAS. With use of new cryogenic technologies, considerably light weight with large aperture telescope is designed. Owing to the large format states-of-art array detectors, the IRIS has an enormous capability for the survey observation, and will provide new discoveries on the formation and evolution of galaxies, brown dwarfs, protoplanetary disk, interstellar matter and so on.     

2001 Mars Odyssey Mission Summary

The 2001 Mars Odyssey spacecraft, now in orbit at Mars, will observe the Martian surface at infrared and visible wavelengths to determine surface mineralogy and morphology, acquire global gamma ray and neutron observations for a full Martian year, and study the Mars radiation environment from orbit. The science objectives of this mission are to: (1) globally map the elemental composition of the surface, (2) determine the abundance of hydrogen in the shallow subsurface, (3) acquire high spatial and spectral resolution images of the surface mineralogy, (4) provide information on the morphology of the surface, and (5) characterize the Martian near-space radiation environment as related to radiation-induced risk to human explorers. To accomplish these objectives, the 2001 Mars Odyssey science payload includes a Gamma Ray Spectrometer (GRS), a multi-spectral Thermal Emission Imaging System (THEMIS), and a radiation detector, the Martian Radiation Environment Experiment (MARIE). THEMIS and MARIE are mounted on the spacecraft with THEMIS pointed at nadir. GRS is a suite of three instruments: a Gamma Subsystem (GSS), a Neutron Spectrometer (NS) and a High-Energy Neutron Detector (HEND). The HEND and NS instruments are mounted on the spacecraft body while the GSS is on a 6-m boom. Some science data were collected during the cruise and aerobraking phases of the mission before the prime mission started. THEMIS acquired infrared and visible images of the Earth-Moon system and of the southern hemisphere of Mars. MARIE monitored the radiation environment during cruise. The GRS collected calibration data during cruise and aerobraking. Early GRS observations in Mars orbit indicated a hydrogen-rich layer in the upper meter of the subsurface in the Southern Hemisphere. Also, atmospheric densities, scale heights, temperatures, and pressures were observed by spacecraft accelerometers during aerobraking as the spacecraft skimmed the upper portions of the Martian atmosphere. This provided the first in-situ evidence of winter polar warming in the Mars upper atmosphere. The prime mission for 2001 Mars Odyssey began in February 2002 and will continue until August 2004. During this prime mission, the 2001 Mars Odyssey spacecraft will also provide radio relays for the National Aeronautics and Space Administration (NASA) and European landers in early 2004. Science data from 2001 Mars Odyssey instruments will be provided to the science community via NASA’s Planetary Data System (PDS). The first PDS release of Odyssey data was in October 2002; subsequent releases occur every 3 months.     

The STEREO Observatory

The Solar Terrestrial Relations Observatory (STEREO) is the third mission in NASA’s Solar Terrestrial Probes program. The mission is managed by the Goddard Space Flight Center (GSFC) and implemented by The Johns Hopkins University Applied Physics Laboratory (JHU/APL). This two-year mission provides a unique and revolutionary view of the Sun–Earth system. Consisting of two nearly identical observatories, one ahead of Earth in its orbit around the Sun and the other trailing behind the Earth, the spacecraft trace the flow of energy and matter from the Sun to Earth and reveal the three-dimensional structure of coronal mass ejections (CMEs) to help explain their genesis and propagation. From its unique side-viewing vantage point, STEREO also provides alerts for Earth-directed solar ejections. These alerts are broadcast at all times and received either by NASA’s Deep Space Network (DSN) or by various space-weather partners.     

The X-Ray Spectrometer on the MESSENGER Spacecraft

NASA’s MESSENGER (MErcury Surface, Space ENvironment, GEochemistry, and Ranging) mission will further the understanding of the formation of the planets by examining the least studied of the terrestrial planets, Mercury. During the one-year orbital phase (beginning in 2011) and three earlier flybys (2008 and 2009), the X-Ray Spectrometer (XRS) onboard the MESSENGER spacecraft will measure the surface elemental composition. XRS will measure the characteristic X-ray emissions induced on the surface of Mercury by the incident solar flux. The Kα lines for the elements Mg, Al, Si, S, Ca, Ti, and Fe will be detected. The 12° field-of-view of the instrument will allow a spatial resolution that ranges from 42 km at periapsis to 3200 km at apoapsis due to the spacecraft’s highly elliptical orbit. XRS will provide elemental composition measurements covering the majority of Mercury’s surface, as well as potential high-spatial-resolution measurements of features of interest. This paper summarizes XRS’s science objectives, technical design, calibration, and mission observation strategy.     

Galileo trajectory design

The Galileo spacecraft was launched by the Space Shuttle Atlantis on October 18, 1989. A two-stage Inertial Upper Stage propelled Galileo out of Earth parking orbit to begin its 6-year interplanetary transfer to Jupiter. Galileo has already received two gravity assists: from Venus on February 10, 1990 and from Earth on December 8, 1990. After a second gravity-assist flyby of Earth on December 8, 1992, Galileo will have achieved the energy necessary to reach Jupiter. Galileo's interplanetary trajectory includes a close flyby of asteroid 951-Gaspra on October 29, 1991, and, depending on propellant availability and other factors, there may be a second asteroid flyby of 243-Ida on August 28, 1993. Upon arrival at Jupiter on December 7, 1995, the Galileo Orbiter will relay data back to Earth from an atmospheric Probe which is released five months earlier. For about 75 min, data is transmitted to the Orbiter from the Probe as it descends on a parachute to a pressure depth of 20–30 bars in the Jovian atmosphere. Shortly after the end of Probe relay, the Orbiter ignites its rocket motor to insert into orbit about Jupiter. The orbital phase of the mission, referred to as the satellite tour, lasts nearly two years, during which time Galileo will complete 10 orbits about Jupiter. On each of these orbits, there will be a close encounter with one of the three outermost Galilean satellites (Europa, Ganymede, and Callisto). The gravity assist from each satellite is designed to target the spacecraft to the next encounter with minimal expenditure of propellant. The nominal mission is scheduled to end in October 1997 when the Orbiter enters Jupiter's magnetotail.List of Acronyms ASI Atmospheric Structure Instrument - EPI Energetic Particles Instrument - HGA High Gain Antenna - IUS Inertial Upper Stage - JOI Jupiter Orbit Insertion - JPL Jet Propulsion Laboratory - LRD Lightning and Radio Emissions Detector - NASA National Aeronautics and Space Administration - NEP Nephelometer - NIMS Near-Infrared Mapping Spectrometer - ODM Orbit Deflection Maneuver - OTM Orbit Trim Maneuver - PJR Perijove Raise Maneuver - PM Propellant Margin - PDT Pacific Daylight Time - PST Pacific Standard Time - RPM Retropropulsion Module - RRA Radio Relay Antenna - SSI Solid State Imaging - TCM Trajectory Correction Maneuver - UTC Universal Time Coordinated - UVS Ultraviolet Spectrometer - VEEGA Venus-Earth-Earth Gravity Assist     

Psychological health maintenance on Space Station Freedom

The scheduling of crew rotations for up to 180 days on Space Station Freedom presents a special challenge for behavioral scientists who are tasked with providing psychological support for the crews, their families, and mission flight controllers. Preflight psychological support planning may minimize the negative impact of psychological and social issues on mission success, as well as assist NASA management in making real-time mission planning decisions in the event of a significant social event (for example, the death of a family member). During flight, the combined psychological, emotional, and social stressors on the astronauts must be monitored, along with other aspects of their health. The Health Maintenance Facility (HMF) will have the capability of providing preventive, diagnostic, and therapeutic assistance for significant psychiatric and interpersonal problems which may develop. Psychological support will not end with the termination of the mission. Mental health professionals must be part of the team of medical personnel whose job will be to facilitate the transition--physical and mental--from the space environment back to planet Earth. This paper reviews each phase of mission planning for Space Station Freedom and specifies those factors that may be critical for psychological health maintenance on extended-duration space missions.     

嫦娥二号再拓展试验测定轨精度研究

基于＂嫦娥二号＂卫星再拓展试验的设计轨道,研究各种摄动力对轨道确定精度的影响,得出的结论是：若要达到km量级的轨道确定精度,必须考虑除天王星和海王星之外所有大行星以及日月的质点引力。文章进一步利用数值分析法研究再拓展任务的轨道确定精度,分析结果表明：基于目前的测控条件,使用30 d以上的测轨弧段可以得到稳定可靠的轨道解,而短弧（小于20 d）稳定轨道的获取需要VLBI（甚长基线干涉）测轨数据支持;当＂嫦娥二号＂距离地球700万km时,测控精度可优于30 km;虽然每天测轨弧段的增加可以改善轨道精度,但是当增加到8 h以上时,定轨精度将不再有明显改善。     

VII: CLOSING SESSION: GOCE: ESA's First Earth Explorer Core Mission

This paper introduces the first ESA Core Earth Explorer mission, GOCE, in the context of ESA's Living Planet programme. GOCE will measure highly accurate, high spatial resolution differential accelerations in three dimensions along a well characterised orbit: the mission is planned for launch in early 2006. The mission objectives are to obtain gravity gradient data such that new global and regional models of the static Earth's gravity field and of the geoid can be deduced at length scales down to 100 km. These products will have broad application in the fields of geodesy, oceanography, solid-earth physics and glaciology. This revised version was published online in August 2006 with corrections to the Cover Date.     

MICROSCOPE On-ground and In-orbit Calibration

The MICROSCOPE mission, to be launched in 2011, will perform the test of the universality of free fall (Equivalence Principle) to an accuracy of 10^?15. The payload consists of two sensors, each controlling the free fall of a pair of test masses: the first for the test of the Equivalence Principle (titanium/platinum), the second for performance verification (platinum/platinum). The capability to detect a faint violation signal of the EP test is conditioned upon the rejection of disturbances arising from the coupling and misalignments of the instrument vectorial outputs. Therefore the performance of the mission depends on the success of the series of calibration operations which are planned during the satellite life in orbit. These operations involve forced motion of the masses with respect to the satellite. Specific data processing tools and simulations are integral parts of the calibration and performance enhancement process, as are the tests operated on ground at the ZARM drop tower. The presentation will focus on the current status of the MICROSCOPE payload, the rationale for the in-orbit calibrations, the data processing operations and the tests performed at the ZARM drop tower.     

Multifunctional structures technology experiment on Deep Space 1Mission

Lockheed Martin Astronautics has developed the Multifunctional Structure (MFS) concept as a new system for spacecraft design that eliminates chassis, cables, connectors and folds the electronics into the walls of the spacecraft. Concurrent engineering will be essential to integrate the electronic, structure, and thermal design. Design methodologies are in work to manage all power, grounding and shielding concerns. The MFS approach offers significant savings in mass and volume and supports the “faster-better-cheaper” philosophy in new spacecraft programs. The technology will be demonstrated as an experiment on the New Millenium Program Deep Space 1 (DS 1) mission