共查询到20条相似文献,搜索用时 671 毫秒
1.
2.
针对由于敌防空系统防御能力不断提高所带来的进攻导弹突防难题,提出主动反拦截突防(IAIP)的概念,以弥补传统机动突防仅考虑进攻导弹的逃逸而忽略其攻击任务的缺陷。根据IAIP制导的内涵,在综合考虑目标的机动性能、拦截导弹末段的拦截特性及进攻导弹的控制系统性能的基础上,建立进攻导弹-目标-拦截导弹的三体运动模型。将突防制导指令的设计等效为最优控制的求解,其中突防指令为实现燃料最省目标的最优解,进攻导弹的过载、拦截导弹的脱靶量、进攻导弹的攻击角、打击精度和突防后的视线角,分别为控制约束、路径约束和末端约束。借鉴控制变量参数化(CVP)方法将最优控制问题转化为非线性数学规划问题,并将路径约束离散化后采用序列二次规划(SQP)算法得到突防时机给定条件下制导指令的数值解。提出基于CVP的混合遗传算法(CVP-GA),用于求解最优突防时机及制导指令。仿真结果显示,采用IAIP最优控制算法的进攻导弹在成功突防后的打击精度仍可满足任务要求,且其燃料消耗相对于传统串联式突防方法降低了23.7%,验证了该方法的有效性及优越性。 相似文献
3.
空中突防作战中,如何以最优兵力策略获得最大作战效率是任务规划中的一项关键技术。构建突防飞机编队通过拦截飞机防空区模型,以突防战斗机与随队支援干扰机的架数为输入项,以成功突防架数和被击落拦截飞机的架数为输出项。根据每种飞机可出动架数产生的所有兵力策略,利用突防模型遍历推演出每种策略预期的空战结果。运用经济学中数据包络分析的方法,对经典的C~2R模型进行改进,定义3种综合评价指数,用每种指数对所有预期的空战结果进行评价并排序,根据排序结果对兵力策略进行比较分析。仿真结果表明,3种指数均能有效地对兵力策略排序优选,提升了作战指挥决策的效率。 相似文献
4.
基于MAX-MIN自适应蚁群优化的无人作战飞机航路规划 总被引:1,自引:0,他引:1
为了保证无人作战飞机(UCAV)以最小的被发现概率和最优的航程到达目标点,在敌方防御区域内执行任务前必须进行航路规划。蚁群优化(ACO)算法的并行实现机制适合于复杂作战环境下的UCAV航路规划,但是基本ACO算法有易陷于局部最优解的缺点。在对基本ACO算法采用精灵策略保留每次迭代最优解的基础上,提出了一种适用于航路规划的MAX-MIN自适应ACO算法,并给出了改进后ACO算法的实现流程,最后采用改进前后的ACO算法对某UCAV的任务态势分别做了仿真实验。实验结果表明改进后的ACO算法可更加有效地应用于UCAV航路规划。 相似文献
5.
为了实现反舰导弹突防概率的动态计算,文章首先对水面舰艇的反导防御体系进行建模,研究反舰导弹和舰空导弹的攻防对抗过程,然后利用伴随技术建立反舰导弹突防概率的解算模型,最终实现突防概率的动态计算。采用该方法解算反舰导弹对舰空导弹的突防概率不仅能保证计算的快速性而且能体现出攻防态势、反舰导弹和舰空导弹的战技术性能对突防概率的影响。 相似文献
6.
7.
在现代化战争中,遂行突防任务的战斗机通常需要与电子干扰机协同配合,来完成特定的任务。为了更高效地利用空域资源,针对突防作战中干扰机的最优空域划设问题,在给出电子干扰下雷达探测范围、航线安全间隔以及有效干扰时间的基础上,建立电子干扰机的最优空域划设模型;在原始灰狼算法中将线性调节参数改为非线性调节参数,同时引入粒子群算法中的记忆功能,改进原始灰狼算法;并采用改进的灰狼优化算法寻找最优的空域基准点,进而确定电子干扰机的最优空域范围。结果表明:对于特定的突防任务,改进的灰狼优化算法比原始灰狼优化算法和粒子群算法更具优越性,能够快速、高效地找到最优的空域基准点;本文所建立的电子干扰机的最优空域划设模型是科学、有效的。 相似文献
8.
航空兵在执行对地突防任务的过程中,电子干扰是掩护突防编队、提高突防飞机生存概率的重要手段。提出一种利用箔条云团散射远距干扰信号对地空导弹制导雷达进行干扰的复合干扰方法。该方法使用干扰机照射突防航线上布撒的箔条云团,通过箔条云团的散射,从地空导弹制导雷达的主瓣注入干扰能量;在此基础上,建立实施正面突防时的箔条弹多次抛洒模型,该模型可以有效的计算出突防编队抛洒箔条弹的间隔距离,从而确定抛洒箔条弹的时机,并通过实例分析验证。结果表明:该方法具有更好的干扰效果;箔条弹多次抛洒模型可靠,可以确保对敌地空导弹阵地的持续干扰。 相似文献
9.
10.
针对建立的垂直平面内交战三方导弹突防模型,应用微分对策理论得到导弹的最优突防策略,并将突防导弹采用微分对策导引律与比例导引律在几种交战环境下进行了仿真对比,可以明显看出,突防导弹采用微分对策导引律能够较好的完成规避敌方导弹拦截和追击目标的任务。 相似文献
11.
基于飞机油箱模型形状特征油量测量切片步长选择方法研究 总被引:1,自引:0,他引:1
在分析飞机数字式油量测量过程中目前广泛使用的切片法油量测量原理的基础上,针对现有的定步长切片法无法得到准确、可靠的燃油质量特性数据库的缺陷,结合对飞机油箱模型形状特征的分析,提出了基于飞机油箱模型形状特征的油量测量切片步长选择方法。此方法包括切片步长整体和局部选择两个过程,整体选择以实现相邻两切片平面所夹油箱模型体积近似相等为目的来确定切片步长,以体现油箱模型截面整体变化规律;局部选择以设计切片平面与截面突变平面重合或尽可能接近的方式,突出油箱截面的局部变化特征。实验结果表明:该切片步长选择方法较定步长方法能够建立更为合理、可靠的燃油质量特性数据库,从而提高了油量测量精度。 相似文献
12.
The effect of inlet conditions on the flow and heat transfer in multiple rotating cavity with axial throughflow 总被引:1,自引:0,他引:1
This paper discusses experimental results from two different build configurations of a heated multiple rotating cavity test rig.Measurements of heat transfer from the discs and tangential velocities are presented.The test rig is a 70% full scale version of a high pressure compressor stack of an axial gas turbine engine.Of particular interest are the internal cylindrical cavities formed by adjacent discs and the interaction of these with a central axial throughflow of cooling air.Tests were carried out for a range of non-dimensional parameters representative of high pressure compressor internal air system flows(Re up to 5×106 and Rez up to 2×105).Two different builds have been tested.The most significant difference between these two build configurations is the size of the annular gap between the(non-rotating) drive shaft and the bores of the discs.The heat transfer data were obtained from thermocouple measurements of surface temperature and a conduction solution method.The velocity measurements were made using a two component,LDA system.The heat transfer results from the discs show differences between the two builds.This is attributed to the wider annular gap allowing more of the throughflow to penetrate into the cavity.There are also significant differences between the radial distributions of tangential velocity in the two builds of the test rig.For the narrow annular gap,there is an increase of non-dimensional tangential velocity V/Ωr with radial location to solid body rotation V/Ωr=1.For the wider annular gap,the non-dimensional velocities show a decrease with radial location to solid body rotation. 相似文献
13.
14.
Abnormal Shape Mould Winding 总被引:1,自引:0,他引:1
Fu Hongya Wang Xianfeng Han Zhenyu Fu Yunzhong 《中国航空学报》2007,20(6):552-558
为解决网格化芯模的缠绕问题,本文提出了复合材料面片缠绕机理;接着详细分析了面片缠绕过程中的芯模凹曲面上纤维滑线和架空现象,应用微分几何曲面理论和空间几何理论,提出判据及其解决方案;最后,针对飞机发动机进气道的缠绕成型,编制缠绕控制程序并进行相应的实验,验证了面片缠绕方法的可行性。 相似文献
15.
16.
航天器返回地球的气动特性综述 总被引:4,自引:0,他引:4
航天器返回地球的飞行过程中,气动特性是实现将宇宙飞行速度减到落地前速度、保证再入飞行得到有效控制以及再入防热安全可靠的关键因素。针对简单旋成体气动外形、半弹道式再入控制、烧蚀防热类返回航天器,综述了返回地球过程中变化的空气流域特性、航天器周围的气体绕流环境、空气与航天器作用产生的动力学与热效应等。系统地给出了该类航天器的再入气动特性参数与飞行性能的共性规律,包括:气动阻力与再入减速、气动升力与再入轨迹控制、配平攻角与飞行稳定性、气动加热与防热,以及再入过程中不同气动特性航天器、气象条件变化等对再入飞行性能的影响规律。为航天器开展返回飞行过程的跨流域气动性能工程研制提供设计参考。 相似文献
17.
Research on Auto-detection for Remainder Particles of Aerospace Relay Based on Wavelet Analysis 总被引:2,自引:0,他引:2
GAO Hong-liang ZHANG Hui WANG Shu-juan 《中国航空学报》2007,20(1):75-80
Aerospace relay is one kind of electronic components which is used widely in national defense system and aerospace system. The existence of remainder particles induces the reliability declining, which has become a severe problem in the development of aerospace relay. Traditional particle impact noise detection (PIND) method for remainder detection is ineffective for small particles, due to its low precision and involvement of subjective factors. An auto-detection method for PIND output signals is proposed in this paper, which is based on direct wavelet de-noising (DWD), cross-correlation analysis (CCA) and homo-filtering (HF), the method enhances the affectiv-ity of PIND test about the small particles. In the end, some practical PIND output signals are analysed, and the validity of this new method is proved. 相似文献
18.
19.
Effects of Mo on the Microstructure and Hydrogen Sorption Properties of Ti-Mo Getters 总被引:1,自引:0,他引:1
ZHOU Hong-guo WEI Xiu-ying MAO Chang-hui XIONG Yu-hua QIN Guang-rong 《中国航空学报》2007,20(2):172-176
The effects of Mo on the microstructure evolution, porosity and hydrogen sorption properties of Ti-Mo getters are investigated in this work. The results show that the addition of Mo prolongs the densification process of Ti-Mo getters and results in a significant amount of sintered pores. With the Mo content increasing, the porosity of getters firstly increases reaching the maximum value as it at- tains about 7.5wt.%, and then drops. At the room temperature, the hydrogen sorption property of getters increases progressively with the Mo content increasing, but the tendency is not very clear before its content lies below 2.5wt.%. When the Mo content achieves about 7.5wt.%, the hydrogen sorption property proves to be the best. The discussion is made about the above mentioned phenomena inclusive of hydrogen sorption properties of getters under different activation conditions (from 500-750 ℃). 相似文献
20.
YANG Fen ZHANG Xue-jun TIAN Fang WU Xu GAN Fu-xing 《中国航空学报》2007,20(2):181-186
Antimony-doped tin hydroxide colloid precipitates have been synthesized by hydrolysis of SnCl4 and SbCl3 using: (1) an ion-exchange hydrolysis to remove chlorine ions, and (2) isoamyl acetate as an azeotropic solvent to obviate water. The obtained dried powder is of high dispersivity without any need for further grinding. The size and dispersivity of the final particles are investigated with the aid of TG-DTA, BET, XRD and TEM. After having calcined, the antimony-doped tin oxide nanopowder possesses a tetragonal rutile structure with high dispersivity, uniform particles and low hard agglomeration. 相似文献