Waveform Detection and Classification with SAW Cepstrum Analysis

A prototype real time cepstrum analyzer incorporating surface acoustic wave (SAW), Fourier transform processors is reported. This system offers sophisticated wideband signal processing for radar, sonar, and communications applications. Practical results demonstrate its capabilities when analyzing bandwidths in excess of 10 MHz in a few microseconds with simulated pulsed RF waveforms in the presence of multipath echoes. Pulse duration, repetition interval, and binary code length are resolved and the potential to characterize unknown chirp waveforms is briefly reported.     

On Increasing Usable MTI Filter Bandwidth by Removing Linear-Phase Constraint

It has been shown in the literature that the linear-phase constraint of finite-duration impulse-response (FIR) digital filters can, under certain circumstances, be effectively traded either for a better filter amplitude response or a reduction in the number of filter coeficients. It is shown that such a tradeoff can be exploited for moving target indicator (MTI) radar signal processors to increase the usable bandwidth for target detection. Although it is demonstrated that the increase is significant for narrowband (ground) clutter, it is negligible for wideband (weather) clutter.     

空域滤波器组对雷达阵列合成距离像的影响分析

为了简化雷达系统硬件设计和降低成本,可以使用多个窄带成分来合成宽带信号,从而获得满足实际需要的合成距离像。针对合成宽带信号和雷达阵列的特点,详细分析了结合合成宽带信号及传统空域滤波器组情况下所合成距离像的失真原因,指出合成距离像的失真由形状变形和位置平移两部分组成,且这两种失真分别由各个空域滤波器输出幅度和相位的波动所引起。同时,推导出计算对应相位和幅度失真度的理论公式,并由此给出了当合成距离像存在可接受失真时阵列的临界条件。计算机数值仿真结果验证了以上结论。     

Bandpass Signal Sampling and Coherent Detection

Coherent detectors in radar and communications receivers are generally implemented in the form of two parallel baseband channels which form in-phase (I) and quadrature (Q) components of a received RF/IF signal. Phase errors of several degrees due to imperfect matching of these separate channels limit the performance achievable from signal processors such as moving target indicators (MTI), coherent integrators, Doppler filters, antenna array processors, and coherent sidelobe cancellers. Thus methods in which a single analog to digital (A/D) converter samples and digitizes the IF signal directly, eliminating the need for IF to baseband conversion, have been of recent interest and are the subject of this paper. To obtain accurate coherent detection from IF samples taken near the Nyquist rate requires interpolation based upon a number of stored samples. An algorithm derived from sampling theory is defined and used to demonstrate accurate reconstruction of the original IF signal from digitized samples. In-phase and quadrature components of the signal are shown to be available from processed samples with demonstrated phase errors less than 0.2°.     

基于常规多普勒滤波器组结构的合成宽带距离像性能分析

为了消除散布效应对宽带信号的不利影响,可以利用多个窄带信号合成宽带信号;同时,通过在子带内处理相干脉冲串,可进行杂波抑制、目标速度估计和区分不同速度的目标。然而,在子带内分别使用常规多普勒滤波器组,会引进多普勒散布效应所造成的输出失配误差,从而造成合成距离像的失真。分析了多普勒散布效应与子带常规多普勒滤波器组输出失配之间的关系,推导了运动目标通过滤波器组后所成高分辨距离像的距离走动公式,给出了适合子带常规多普勒滤波器组的目标速度临界值。仿真实验验证了以上结论。     

稳健的宽带信号接收波束形成方法

对于宽带信号接收波束形成,为了降低阵列中各传感器接收通道时延和相位不一致性对性能的影响,提出了一种稳健的宽带信号接收波束形成方法。首先根据接收波束指向对阵列中各传感器信号的空间时延差进行补偿,然后利用短时傅立叶变换对阵列中各传感器信号进行子频带划分,并对各子频带所有传感器信号的时延和相位进行调整并相干合成,最后将相干合成后的子频带信号综合为宽带时域波束。针对宽带线性调频信号的计算机仿真实验表明,相比于传统的波束形成方法,所提方法能够显著提高宽带信号的合成效率。     

An Analysis and Comparison of Energy Direction Finding Systems

Direction finding systems that use knowledge of only the aporoximate center frequency and bandwidth of the arriving signal and perform the azimuth estimate using the signal energy azimuthal distribution are of widespread interest. In this paper, a variety of such systems are considered. Their performances are analyzed and compared to each other and to a baseline optimal system. Particular attention is given to systems that will perform well against wideband signals in a low signal-to-noise environment.     

阵列宽带Lamb波在结构损伤检测中的应用

阵列信号处理中的空间谱估计可以对信号源进行辨别和定位,于是通过采集在结构上布置的阵列传感器Lamb波信号用来检测损伤发生的位置。通常,大多数空间谱估计方法均以窄带信号为假定,在很多基于Lamb波的结构损伤检测中,为了减小频散特性的影响,大多数研究以Lamb波为窄带信号进行分析,但无限窄的激励信号是物理不可实现的。因此,其在多数情况下Lamb波信号并不符合窄带信号假定,更应被认为是一种宽带信号来进行处理。进而利用空间谱估计中宽带信号非相干子空间处理方法（Incoherent Signal Subspace Method,ISM）中阵列接收的宽带Lamb波信号进行处理,检测出结构发生单一损伤时的损伤位置。随后,当结构损伤与边界反射波有叠加时会引起损伤信号相干,采用宽带信号相干子空间方法（Coherent Signal Subspace Method,CSM）对损伤位置进行检测,得到了较好的结果。     

基于空域稀疏性的宽带DOA估计

利用宽带阵列接收信号的空域稀疏性,将宽带信号的波达方向(DOA)估计转化为一个稀疏信号重构的问题,提出了一种新的宽带信号DOA估计算法。该算法将宽带信号分解为多个子带信号,联合利用多个子带信号的空域稀疏性进行重构。它是对用于稀疏重构的标准的稀疏贝叶斯学习算法的推广,可适用于多冗余字典的信号模型。另外,通过对多快拍的阵列接收信号进行奇异值分解(SVD),提取信号子空间作为算法的输入数据,可以在有效减少运算复杂度的同时,提高对噪声的稳健性。与传统的宽带阵列DOA估计方法相比,该算法能够用于低信噪比、快拍有限和信源相关性较高的场合,同时算法的性能对信源个数的估计值不太敏感。仿真实验表明,该算法相对现有的基于子空间类的方法,具有更好的DOA估计性能。     

ANALYSIS OF THE RETURNED SIGNAL MODEL IN BISTATIC RADAR SYSTEMS

ＡＮＡＬＹＳＩＳＯＦＴＨＥＲＥＴＵＲＮＥＤＳＩＧＮＡＬＭＯＤＥＬＩＮＢＩＳＴＡＴＩＣＲＡＤＡＲＳＹＳＴＥＭＳＹｉｎＣｈｅｎｇｙｏｕ，ＸｕＳｈａｎｊｉａ，ＷａｎｇＤｏｎｇｊｉｎ，ＺｈｏｕＬｉｎｙｕｎ（ＤｅｐａｒｔｍｅｎｔｏｆＥｌｅｃｔｒｏｎｉｃＥｎｇｉ...     

聚焦变换在MIMO阵列方位估计中的应用

MIMO阵列是近年来信号处理领域提出的一种新体制阵列技术,可有效避免常规阵列中的相干源问题。为解决多载波造成的方位模糊,提出了一种基于聚焦变换的MIMO阵列目标方位估计方法。该方法将MIMO阵列接收信号分解为多个频率分量的信号,并通过聚焦算法将多个频率信号聚焦到同一信号子空间,然后对聚焦后的信号进行方位估计。仿真结果表明:与直接对MIMO阵列接收信号进行方位估计相比,该方法利用了MIMO阵列的回波不相干性和宽带信号能量,具有更好的分辨能力和更高的方位估计精度。     

一种基于DRFM和数字信道化技术的 宽带雷达目标干扰模拟器设计

提出了一种DRFM和数字信道化技术的宽带雷达目标干扰模拟器设计方案,详细讨论了宽带雷达信号的数字信道化接收算法和基于DRFM的扩展目标/干扰生成方法。仿真分析结果表明,该方案可以实现1 GHz带宽的雷达导引头目标干扰信号模拟,并可推广用于宽带雷达导引头干扰机和宽带雷达导引头数据采集系统设计。     

Signal processing of wide bandwidth and wide beamwidth P-3 SAR data

This research is concerned with multidimensional signal processing and image formation with FOliage PENetrating (FOPEN) airborne radar data which were collected by a Navy P-3 ultra wideband (UWB) radar in 1995. The digital signal processors that were developed for the P-3 data commonly used a radar beamwidth angle that was limited to 35 deg. Provided that the P-3 radar beamwidth angle (after slow-time FIR filtering and 6:1 decimation) was 35 deg, the P-3 signal aperture radar (SAR) system would approximately yield alias-free data in the slow-time Doppler domain. We provide an analysis here of the slow-time Doppler properties of the P-3 SAR system. This study indicates that the P-3 database possesses a 50 deg beamwidth angle within the entire [215, 730] MHz band of the P-3 radar. We show that the 50-degree beamwidth limit is imposed by the radar (radial) range swath gate; a larger beamwidth measurements would be possible with a larger range swath gate. The 50-degree beamwidth of the P-3 system results in slow-time Doppler aliasing within the frequency band of [444, 730] MHz. We outline a slow-time processing of the P-3 data to minimize the Doppler aliasing. The images which are formed via this method are shown to be superior in quality to the images which are formed via the conventional P-3 processor. In the presentation, we also introduce a method for converting the P-3 deramped (range-compressed) data into its alias-free baseband echoed data; the utility of this conversion for suppressing radio frequency interference signals is shown     

Volume Properties for the Wideband Ambiguity Function

It is shown that the volume under the wideband ambiguity function is close to the square of the signal energy. The ambiguity volume is asymptotically conserved as the signal approaches the narrowband case. The narrowband ambiguity volume is a lower bound for the volume of the wideband ambiguity function.     

The Effect of Spectral Shape on Clutter Standard Deviation

Many radar systems now employ wideband waveforms and noncoherent averaging techniques to reduce the scintillation of the backscatter from ground clutter. The purpose of this paper is to quantify the effects of the wideband spectral shape on the clutter standard deviation after noncoherent averaging of the received signal. Relationships are developed which quantify the clutter standard deviation for any spectral shape and any ratio of transmitted band-width to processed bandwidth.     

基于频谱和倒谱分析的探地雷达地杂波抑制

超宽带探地雷达被广泛用于检测浅层埋藏的反人员地雷,其中滤除强的地表反射回波是完成目标检测、成像与识别的关键。将独立分量分析算法与数据非一致性检测方法相结合,通过分析独立分量的频谱和倒谱,给出了一种可以适应多目标数据区域且自动选取独立分量的地杂波抑制方法。实验结果证明了该方法的可行性和有效性。     

Advantageous Properties of Frequency Division

The performance of a wideband frequency divider with two independent sinusoidal input signals present is analyzed. Both the case of a relative low-level spurious signal and the case of a relative high-level spurious signal are considered. It is ascertained that a considerable reduction of the spurious signal is achieved and the exact nature of the improvement is dependent on the relative strength of the spurious signal.     

Fast-Adapting Matrix Filtering

Implementation and convergence of adaptive processors are of continuing interest. To this end, a fast-adapting, linear, general recursive matrix-filtering algorithm is described. Two complex xoefficients are optimized at each recursion. A signal and interference estimation procedure is included. Results for some low-resolution, frequency domain beamformer trials with two targets, and using a single sample set, are presented. Considerable adaptive improvement occurs, along with target resolution, compared with a correlation beamformer. The algorithm shows rapid and direct convergence.     

一种瞬时大带宽DRFM系统的信道化设计

为实现宽带雷达回波信号的模拟生成,通常采用基于信道化技术的射频存储(DRFM)系统。在信道化DRFM系统中,不合理的信道划分方案和多相滤波器设计会导致频谱混叠、频谱分量缺失和幅度失真。文章提出了一种相邻信道频谱有50%交叠的信道划分方法,并对信道化滤波器组进行了优化设计。在此基础上,给出了一种瞬时大带宽DRFM系统的实现方案。仿真结果表明,文章提出的设计方案可以实现Nyquist采样带宽内雷达信号的射频存储和模拟转发,且具有较小的幅度失真,可以满足瞬时大带宽雷达回波信号的模拟需求。     

Optimal Array Processor Performance Trade-offs under Directional Uncertainty

Detection performance in terms of the receiver operating characteristic (ROC) curve is obtained for three specific problems involving either signal or noise source location uncertainty. The array processors are optimum in the sense that they form the likelihood ratio of the outputs of the individual array elements. Performance trade-offs due to signal uncertainty, signal and noise source location uncertainty, and array size are presented.