共查询到17条相似文献,搜索用时 125 毫秒
1.
可靠性增长下的Bayes序贯检验方法 总被引:1,自引:1,他引:0
针对可靠性增长下的序贯检验分析问题,提出了一种变总体Bayes序贯检验方法.该方法依据产品研制过程中产生的多状态试验数据,利用离散AMSAA(Army Material Systems Analysis Activity)可靠性增长模型对产品可靠性的变化规律进行描述,给出了变总体试验数据似然函数的表达式,并对变总体Bayes序贯检验的后验概率比和决策阈值进行了定义,进而构建了可靠性增长下的Bayes序贯检验模型.研究结果表明,提出的方法有效地解决了具有可靠性增长的可靠性指标的假设检验问题. 相似文献
2.
3.
基于Bayes变动统计理论的测试性外场统计验证方法 总被引:6,自引:3,他引:3
针对故障检测/隔离数据为"小子样"情况导致的测试性外场统计验证存在的周期长、验证结论置信度低等问题,研究并提出了基于Bayes变动统计理论的的测试性外场统计验证模型和方法。首先建立了不同寿命周期阶段故障检测率(FDR)的序化关系模型;然后以Dirichlet分布为先验分布,利用不同寿命周期阶段故障检测率先验估计值确定Dirichlet分布参数;在此基础上,融合"小子样、异总体"研制阶段增长试验数据和"小子样"外场使用数据,研究并提出了故障检测率的Bayes综合评估模型;引入Gibbs抽样方法求解故障检测率Bayes综合评估模型的复杂高维后验积分;最后在某机载稳定跟踪平台上开展了应用研究。结果表明本文方法能在较短的外场使用周期内,给出较高置信度的外场验证结论,为大型高可靠性装备测试性外场统计验证研究提供了重要的理论依据。 相似文献
4.
5.
6.
成败型产品基于验后概率的Bayes序贯检验技术 总被引:1,自引:1,他引:0
分析了基于损失的Bayes检验方法和基于风险的SPOT(sequential posterior odd test)方法存在的不足.对装备试验与评价中成败型产品的Bayes序贯检验,在给定的两类风险要求下,建立了基于验后概率的Bayes序贯检验模型(PBSTM),给出了模型的求解算法和实际验后风险的计算公式. 最后结合装备可靠性分析案例,进行了示例分析,从数据上证明了PBSTM模型优越性和有效性.研究结果表明:PBSTM模型从理论上保证了序贯检验的结论同时满足小概率事件原理和两类风险要求,避免了现有假设检验方法存在的不足. 相似文献
7.
8.
9.
介绍了采用一种动态建模方法研究导弹武器系统的可靠性增长问题.通过求解各阶段的可靠性特征量,利用回归模型分析其可靠性增长过程,这种方式适用于多阶段、不同环境下的试验情形. 相似文献
10.
11.
12.
13.
14.
《中国航空学报》2021,34(5):554-572
The reliability estimation of mechanical seals is of crucial importance due to their wide applications in pumps in various mechanical systems. Failure of mechanical seals might cause leakage, and might lead to system failure and other relevant consequences. In this study, the reliability estimation for mechanical seals based on bivariate dependence analysis and considering model uncertainty is proposed. The friction torque and leakage rate are two degradation performance indicators of mechanical seals that can be described by the Wiener process, Gamma process, and inverse Gaussian process. The dependence between the two indicators can be described by different copula functions. Then the model uncertainty is considered in the reliability estimation using the Bayesian Model Average (BMA) method, while the unknown parameters in the model are estimated by Bayesian Markov Chain Monte Carlo (MCMC) method. A numerical simulation study and fatigue crack study are conducted to demonstrate the effectiveness of the BMA method to capture model uncertainty. A degradation test of mechanical seals is conducted to verify the proposed model. The optimal stochastic process models for two performance indicators and copula function are determined based on the degradation data. The results show the necessity of using the BMA method in degradation modeling. 相似文献
15.
某型发动机无失效数据的Bayes可靠性分析 总被引:3,自引:0,他引:3
在定时截尾试验中,有时会遇到无失效数据,特别是在高可靠性、小样本问题中更容易产生无失效数据。对某型发动机的无失效数据,在失效概率服从不完全Beta分布时,给出了失效概率的Bayes估计,并在引进失效信息后,给出了失效概率的Bayes估计和综合估计,从而可以得到该型发动机可靠度的估计。 相似文献
16.