The Far Ultra-Violet Imager on the Icon Mission

ICON Far UltraViolet (FUV) imager contributes to the ICON science objectives by providing remote sensing measurements of the daytime and nighttime atmosphere/ionosphere. During sunlit atmospheric conditions, ICON FUV images the limb altitude profile in the shortwave (SW) band at 135.6 nm and the longwave (LW) band at 157 nm perpendicular to the satellite motion to retrieve the atmospheric O/N₂ ratio. In conditions of atmospheric darkness, ICON FUV measures the 135.6 nm recombination emission of \(\mathrm{O}^{+}\) ions used to compute the nighttime ionospheric altitude distribution. ICON Far UltraViolet (FUV) imager is a Czerny–Turner design Spectrographic Imager with two exit slits and corresponding back imager cameras that produce two independent images in separate wavelength bands on two detectors. All observations will be processed as limb altitude profiles. In addition, the ionospheric 135.6 nm data will be processed as longitude and latitude spatial maps to obtain images of ion distributions around regions of equatorial spread F. The ICON FUV optic axis is pointed 20 degrees below local horizontal and has a steering mirror that allows the field of view to be steered up to 30 degrees forward and aft, to keep the local magnetic meridian in the field of view. The detectors are micro channel plate (MCP) intensified FUV tubes with the phosphor fiber-optically coupled to Charge Coupled Devices (CCDs). The dual stack MCP-s amplify the photoelectron signals to overcome the CCD noise and the rapidly scanned frames are co-added to digitally create 12-second integrated images. Digital on-board signal processing is used to compensate for geometric distortion and satellite motion and to achieve data compression. The instrument was originally aligned in visible light by using a special grating and visible cameras. Final alignment, functional and environmental testing and calibration were performed in a large vacuum chamber with a UV source. The test and calibration program showed that ICON FUV meets its design requirements and is ready to be launched on the ICON spacecraft.     

Daytime O/N<Subscript>2</Subscript> Retrieval Algorithm for the Ionospheric Connection Explorer (ICON)

The NASA Ionospheric Connection Explorer Far-Ultraviolet spectrometer, ICON FUV, will measure altitude profiles of the daytime far-ultraviolet (FUV) OI 135.6 nm and N₂ Lyman-Birge-Hopfield (LBH) band emissions that are used to determine thermospheric density profiles and state parameters related to thermospheric composition; specifically the thermospheric column O/N₂ ratio (symbolized as \(\Sigma\)O/N₂). This paper describes the algorithm concept that has been adapted and updated from one previously applied with success to limb data from the Global Ultraviolet Imager (GUVI) on the NASA Thermosphere Ionosphere Mesosphere Energetics and Dynamics (TIMED) mission. We also describe the requirements that are imposed on the ICON FUV to measure \(\Sigma\)O/N₂ over any 500-km sample in daytime with a precision of better than 8.7%. We present results from orbit-simulation testing that demonstrates that the ICON FUV and our thermospheric composition retrieval algorithm can meet these requirements and provide the measurements necessary to address ICON science objectives.     

Time-Delay Integration Imaging with ICON’s Far-Ultraviolet Imager

A Time-Delay Integration (TDI) image acquisition and processing system has been developed to capture ICON’s Far Ultraviolet (FUV) Spectrographic Imager data. The TDI system is designed to provide variable-range motion-compensated imaging of Earth’s nightside ionospheric limb and sub-limb scenes viewed from Low Earth Orbit in the 135.6 nm emission of oxygen with an integration time of 12 seconds. As a pre-requisite of the motion compensation the TDI system is also designed to provide corrections for optical distortions generated by the FUV Imager’s optical assembly. On the dayside the TDI system is used to process 135.6 nm and 157.0 nm wavelength altitude profiles simultaneously. We present the TDI system’s design methodology and implementation as an FPGA module with an emphasis on minimization of on-board data throughput and telemetry. We also present the methods and results of testing the TDI system in simulation and with Engineering Ground Support Equipment (EGSE) to validate its performance.

     

Daytime Ionosphere Retrieval Algorithm for the Ionospheric Connection Explorer (ICON)

The NASA Ionospheric Connection Explorer Extreme Ultraviolet spectrograph, ICON EUV, will measure altitude profiles of the daytime extreme-ultraviolet (EUV) OII emission near 83.4 and 61.7 nm that are used to determine density profiles and state parameters of the ionosphere. This paper describes the algorithm concept and approach to inverting these measured OII emission profiles to derive the associated \(\mathrm{O}^{+}\) density profile from 150–450 km as a proxy for the electron content in the F-region of the ionosphere. The algorithm incorporates a bias evaluation and feedback step, developed at the U.S. Naval Research Laboratory using data from the Special Sensor Ultraviolet Limb Imager (SSULI) and the Remote Atmospheric and Ionospheric Detection System (RAIDS) missions, that is able to effectively mitigate the effects of systematic instrument calibration errors and inaccuracies in the original photon source within the forward model. Results are presented from end-to-end simulations that convolved simulated airglow profiles with the expected instrument measurement response to produce profiles that were inverted with the algorithm to return data products for comparison to truth. Simulations of measurements over a representative ICON orbit show the algorithm is able to reproduce hmF2 values to better than 5 km accuracy, and NmF2 to better than 12% accuracy over a 12-second integration, and demonstrate that the ICON EUV instrument and daytime ionosphere algorithm can meet the ICON science objectives which require 20 km vertical resolution in hmF2 and 18% precision in NmF2.     

Thermosphere-Ionosphere-Electrodynamics General Circulation Model for the Ionospheric Connection Explorer: TIEGCM-ICON

The NASA Ionospheric Connection explorer (ICON) will study the coupling between the thermosphere and ionosphere at low- and mid-latitudes by measuring the key parameters. The ICON mission will also employ numerical modeling to support the interpretation of the observations, and examine the importance of different vertical coupling mechanisms by conducting numerical experiments. One of these models is the Thermosphere-Ionosphere-Electrodynamics General Circulation Model-ICON (TIEGCM-ICON) which will be driven by tidal perturbations derived from ICON observations using the Hough Mode Extension method (HME) and at high latitude by ion convection and auroral particle precipitation patterns from the Assimilative Mapping of Ionospheric Electrodynamics (AMIE). The TIEGCM-ICON will simulate the thermosphere-ionosphere (TI) system during the period of the ICON mission. In this report the TIEGCM-ICON is introduced, and the focus is on examining the effect of the lower boundary on the TI-system to provide some guidance for interpreting future ICON model results.     

Overview of Nighttime Ionospheric Instabilities at Low- and Mid-Latitudes: Coupling Aspects Resulting in Structuring at the Mesoscale

We present a review of the current state of understanding regarding two classes of irregularities causing mesoscale structuring (hundreds of kilometers) in the nighttime ionosphere at low- and mid-latitudes. Additionally, current state of understanding of equatorial plasma bubbles at low latitudes, and medium-scale traveling ionospheric disturbances at mid latitudes and their relationship to possible seeding from lower altitudes are described. In each case, well-developed linear theories exist to explain the general properties of the irregularities. However, these linear theories have growth rates too low to explain the actual observations, giving rise to the need to invoke seeding mechanisms. We describe the observational databases that have been compiled over the decades and discuss possible coupling and seeding mechanisms that would overcome the low growth rate and explain the observed structuring at the mesoscale. Future research directions are also briefly discussed.     

Low Latitude Ionospheric Electrodynamics

The low latitude ionosphere is strongly affected by several highly variable electrodynamic processes. Over the last two decades ground-based and satellite measurements and global numerical models have been extensively used to study the longitude-dependent climatology of low latitude electric fields and currents. These electrodynamic processes and their ionospheric effects exhibit large ranges of temporal and spatial variations during both geomagnetic quiet and disturbed conditions. Numerous recent studies have investigated the short term response of equatorial electric fields and currents to lower atmospheric transport processes and solar wind-magnetosphere driving mechanisms. This includes the large electric field and current perturbations associated with arctic sudden stratospheric warming events during geomagnetic quiet times and highly variable storm time prompt penetration and ionospheric disturbance dynamo effects. In this review, we initially describe recent experimental and numerical modeling results of the global climatology and short term variability of quiet time low latitude electrodynamic plasma drifts. Then, we examine the present understanding of equatorial electric field and current perturbation fields during periods of enhanced geomagnetic activity.     

Summary of quantitative interpretation of IMAGE far ultraviolet auroral data

Direct imaging of the magnetosphere by instruments on the IMAGE spacecraft is supplemented by simultaneous observations of the global aurora in three far ultraviolet (FUV) wavelength bands. The purpose of the multi-wavelength imaging is to study the global auroral particle and energy input from the magnetosphere into the atmosphere. This paper describes the method for quantitative interpretation of FUV measurements. The Wide-Band Imaging Camera (WIC) provides broad band ultraviolet images of the aurora with maximum spatial resolution by imaging the nitrogen lines and bands between 140 and 180 nm wavelength. The Spectrographic Imager (SI), a dual wavelength monochromatic instrument, images both Doppler-shifted Lyman-α emissions produced by precipitating protons, in the SI-12 channel and OI 135.6 nm emissions in the SI-13 channel. From the SI-12 Doppler shifted Lyman-α images it is possible to obtain the precipitating proton flux provided assumptions are made regarding the mean energy of the protons. Knowledge of the proton (flux and energy) component allows the calculation of the contribution produced by protons in the WIC and SI-13 instruments. Comparison of the corrected WIC and SI-13 signals provides a measure of the electron mean energy, which can then be used to determine the electron energy flux. To accomplish this, reliable emission modeling and instrument calibrations are required. In-flight calibration using early-type stars was used to validate the pre-flight laboratory calibrations and determine long-term trends in sensitivity. In general, very reasonable agreement is found between in-situ measurements and remote quantitative determinations.     

Frequency-Dependent Ionospheric Refraction Effects on the Doppler Shift of Satellite Signals

Analysis of four-frequency satellite Doppler data has allowed the separation and measurement of frequency-dependent ionospheric contributions to the Doppler shift, providing information useful in the study of errors incurred when tracking radio signals through the ionosphere. These refraction errors affect the accuracy of navigational position fixes obtained by Doppler satellite tracking systems. Some measured ionospheric refraction errors reported here are of interest because their magnitudes are significantly greater than those heretofore predicted from theoretical considerations.     

Ionospheric disturbances resulting from ion-neutral coupling

Space Science Reviews - Recent advances in subjects related to ion-neutral coupling in the disturbed ionosphere are summarized. Areas of emphasis include traveling ionospheric disturbances,...     

北斗星基增强电离层模型精度评估与分析

针对如何有效地对北斗星基增强系统(SBAS)电离层在模型精度、模型时效性等方面进行综合评估,提出了一种修正的CODE格网模型,通过增加国内陆态网监测站观测数据,提升了CODE格网模型精度。以此模型为基准,利用2020年近一个月的数据分析了北斗区域格网电离层模型和北斗SBAS电离层模型的延迟误差、改正比例的变化以及在全球的覆盖范围,并从全球不同纬度带比较了北斗基本导航和星基增强电离层模型的精度。结果表明：修正的CODE模型精度符合评估要求,且与我国电离层实际变化情况更吻合,北斗区域格网电离层模型和北斗SBAS电离层模型精度相当,优于0.3m,改正比例均优于80%,但北斗SBAS电离层模型覆盖范围明显更大。     

北斗星基增强电离层模型精度评估与分析

针对如何有效地对北斗星基增强系统(SBAS)电离层在模型精度、模型时效性等方面进行综合评估,提出了一种修正的CODE格网模型,通过增加国内陆态网监测站观测数据,提升了CODE格网模型精度。以此模型为基准,利用2020年近一个月的数据分析了北斗区域格网电离层模型和北斗SBAS电离层模型的延迟误差、改正比例的变化以及在全球的覆盖范围,并从全球不同纬度带比较了北斗基本导航和星基增强电离层模型的精度。结果表明修正的CODE模型精度符合评估要求,且与我国电离层实际变化情况更吻合,北斗区域格网电离层模型和北斗SBAS电离层模型精度相当,优于0.3m,改正比例均优于80%,但北斗SBAS电离层模型覆盖范围明显更大。     

Correction to: Mission to Planet Earth: The First Two Billion Years

Space Science Reviews - The Ionospheric Connection Explorer (ICON) mission makes measurements in near-Earth space that provide knowledge of the state of the ionosphere. From the vantage of...     

Michelson Interferometer for Global High-Resolution Thermospheric Imaging (MIGHTI): Instrument Design and Calibration

The Michelson Interferometer for Global High-resolution Thermospheric Imaging (MIGHTI) instrument was built for launch and operation on the NASA Ionospheric Connection Explorer (ICON) mission. The instrument was designed to measure thermospheric horizontal wind velocity profiles and thermospheric temperature in altitude regions between 90 km and 300 km, during day and night. For the wind measurements it uses two perpendicular fields of view pointed at the Earth’s limb, observing the Doppler shift of the atomic oxygen red and green lines at 630.0 nm and 557.7 nm wavelength. The wavelength shift is measured using field-widened, temperature compensated Doppler Asymmetric Spatial Heterodyne (DASH) spectrometers, employing low order échelle gratings operating at two different orders for the different atmospheric lines. The temperature measurement is accomplished by a multichannel photometric measurement of the spectral shape of the molecular oxygen A-band around 762 nm wavelength. For each field of view, the signals of the two oxygen lines and the A-band are detected on different regions of a single, cooled, frame transfer charge coupled device (CCD) detector. On-board calibration sources are used to periodically quantify thermal drifts, simultaneously with observing the atmosphere. The MIGHTI requirements, the resulting instrument design and the calibration are described.     

电离层色散对DS/FH-BPSK信号解调性能影响

相位连续的DS/FH(Direct Sequence/Frequency Hopping,直接序列/跳频)扩频信号的扩频带宽比直扩信号更宽,在电离层的非线性相位以及跳频频点变化这两者的共同作用下,该信号的BPSK(Binary Phase Shift Keying,二相相移键控)解调性能明显恶化。依据随机变量概率分布的数学规律,推导得到了在背景电离层色散条件和跳频频点均匀分布前提下,某种DS/FH卫星测控信号的引导信号和长周期信号BPSK误码率的变化规律,并在特定信号参数条件下进行了误码率仿真。     

Review of Ionospheric Effects of Solar Wind Magnetosphere Coupling in the Context of the Expanding Contracting Polar Cap Boundary Model

This paper reviews the coupling between the solar wind, magnetosphere and ionosphere. The coupling between the solar wind and Earth’s magnetosphere is controlled by the orientation of the Interplanetary Magnetic Field (IMF). When the IMF has a southward component, the coupling is strongest and the ionospheric convection pattern that is generated is a simple twin cell pattern with anti-sunward flow across the polar cap and return, sunward flow at lower latitudes. When the IMF is northward, the ionospheric convection pattern is more complex, involving flow driven by reconnection between the IMF and the tail lobe field, which is sunward in the polar cap near noon. Typically four cells are found when the IMF is northward, and the convection pattern is also more contracted under these conditions. The presence of a strong Y (dawn-dusk) component to the IMF leads to asymmetries in the flow pattern. Reconnection, however, is typically transient in nature both at the dayside magnetopause and in the geomagnetic tail. The transient events at the dayside are referred to as flux transfer events (FTEs), while the substorm process illustrates the transient nature of reconnection in the tail. The transient nature of reconnection lead to the proposal of an alternative model for flow stimulation which is termed the expanding/contracting polar cap boundary model. In this model, the addition to, or removal from, the polar cap of magnetic flux stimulates flow as the polar cap boundary seeks to return to an equilibrium position. The resulting average patterns of flow are therefore a summation of the addition of open flux to the polar cap at the dayside and the removal of flux from the polar cap in the nightside. This paper reviews progress over the last decade in our understanding of ionospheric convection that is driven by transient reconnection such as FTEs as well as by reconnection in the tail during substorms in the context of a simple model of the variation of open magnetic flux. In this model, the polar cap expands when the reconnection rate is higher at the dayside magnetopause than in the tail and contracts when the opposite is the case. By measuring the size of the polar cap, the dynamics of the open flux in the tail can be followed on a large scale.     

Heavy ions in the magnetosphere

For purposes of this review heavy ions include all species of ions having a mass per unit charge of 2 AMU or greater. The discussion is limited primarily to ions in the energy range between 100 eV and 100 keV. Prior to the discovery in 1972 of large fluxes of energetic O⁺ ions precipitating into the auroral zone during geomagnetic storms, the only reported magnetosphere ion species observed in this energy range were helium and hydrogen. More recently O⁺ and He⁺ have been identified as significant components of the storm time ring current, suggesting that an ionosphere source may be involved in the generation of the fluxes responsible for this current. Mass spectrometer measurements on board the S3-3 satellite have shown that ionospheric ions in the auroral zone are frequently accelerated upward along geomagnetic field lines to several keV energy in the altitude region from 5000 km to greater than 8000 km. These observations also show evidence for acceleration perpendicular to the magnetic field and thus cannot be explained by a parallel electric field alone. This auroral acceleration region is most likely the source for the magnetospheric heavy ions of ionospheric origin, but further acceleration would probably be required to bring them to characteristic ring current energies. Recent observations from the GEOS-1 spacecraft combined with earlier results suggest comparable contributions to the hot magnetopheric plasma from the solar wind and the ionosphere.Proceedings of the Symposium on Solar Terrestrial Physics held in Innsbruck, May–June 1978.     

Ionospheric and thermospheric responses during August 1972 storms — A review

Various reports of ionospheric responses during the August 1972 storm events are reviewed with respect to the phenomena in three major world sectors, N-S America, Afro-Europe, and Austro-Asia, in order to have a global picture. Emphasized highlights are (1) extensive investigation of the sudden increase of the total electron content estimated from Faraday-rotation measurements of satellite signals; (2) a dramatic upward surge above 300 km altitude, soon after a flare, measured by the Millstone Hill incoherent scatter radar; (3) electron density profiles, electric fields and conductivities, and neutral winds, at the time of the geomagnetic storm sudden commencement and during the succeeding storms, measured by the Chatanika incoherent scatter radar; and, (4) approximately 2.5-h oscillatory F2 density variations in Eastern Asia during the F2 storm main phase. To show temporal variations of the latitudinal distributions of storm-time F2 electron densities, in three longitudinal sectors separated about 60° longitude each, newly investigated results of the F2 hourly data at 35 stations in the Asia-Australia-Pacific sector are then exhibited. Finally, current theories or at least theoretical ideas of ionospheric storm mechanisms are briefly introduced, and a few remarks on the August events in the light of those theories are presented.     

The visible imaging system (VIS) for the polar spacecraft

The Visible Imaging System (VIS) is a set of three low-light-level cameras to be flown on the POLAR spacecraft of the Global Geospace Science (GGS) program which is an element of the International Solar-Terrestrial Physics (ISTP) campaign. Two of these cameras share primary and some secondary optics and are designed to provide images of the nighttime auroral oval at visible wavelengths. A third camera is used to monitor the directions of the fields-of-view of these sensitive auroral cameras with respect to sunlit Earth. The auroral emissions of interest include those from N ₂ ⁺ at 391.4 nm, Oi at 557.7 and 630.0 nm, Hi at 656.3 nm, and Oii at 732.0 nm. The two auroral cameras have different spatial resolutions. These resolutions are about 10 and 20 km from a spacecraft altitude of 8R _e . The time to acquire and telemeter a 256×256-pixel image is about 12 s. The primary scientific objectives of this imaging instrumentation, together with thein-situ observations from the ensemble of ISTP spacecraft, are (1) quantitative assessment of the dissipation of magnetospheric energy into the auroral ionosphere, (2) an instantaneous reference system for thein-situ measurements, (3) development of a substantial model for energy flow within the magnetosphere, (4) investigation of the topology of the magnetosphere, and (5) delineation of the responses of the magnetosphere to substorms and variable solar wind conditions.