Detection performance in K-distributed and correlatedRayleigh clutters

Performance prediction for a detection system employing noncoherent integration is carried out for a chi-square family of fluctuating targets in K-distributed clutter plus noise. The detection performance for Swerling 11 targets in the K-distributed clutter plus noise is compared with that in exponentially correlated Rayleigh clutter. The results show that the performance prediction based on N pulses integrated in clutter plus noise using the K-distributed clutter model may be approximately equivalent to that using the exponentially correlated Rayleigh-distributed clutter model     

MMW system trade-offs

A brief review is given of the current state of knowledge of millimeter-wave atmospheric propagation and clutter characteristics and the detection performance of two air-to-ground fire-control systems evaluated in terms of their ability to detect a 40-m² target in the presence of atmospheric attenuation and three types of clutter. Generally, the 35-GHz system considered performed better in terms of signal-to-noise ratio performance and in signal-to-clutter ratio performance for light clutter. In heavy clutter, the 95-GHz system performed significantly better than the 35-GHz system. For 300-m altitude with refrozen snow clutter background, neither system developed a large enough signal-to-clutter radio to detect the target reliably     

Analysis of array errors and a short-time processor in airbornephased array radars

Array errors are inherent in a realistic phased array radar system. The influence of array errors on the clutter degrees of freedom and the clutter subspace in an airborne phased array radar is analyzed. Based on the presented theoretic results, a method of short-time processing followed by coherent integration is proposed for clutter suppression in airborne phased array radars. It can approximate the two-dimensional optimal processor well even in the presence of array errors, clutter fluctuations and aircraft drift, with a considerable saving in computations     

Effect of timing jitter on performance of MTI filters

The effect of transmitting timing jitter and sampling jitter on a multipulse clutter cancellation system is analyzed, and explicit expressions are obtained for the net increase in the residue clutter power due to timing jitter. The increase in mean-square error is found to be proportional to the jitter variance, with the two jitters contributing almost equally. The system analyzed can have either a recursive or nonrecursive MTI filter, and the latter includes the familiar two- and three-pulse canceller as special cases. The increase in residue clutter power for a three-pulse canceller is about 4.8 dB worse than that for a two-pulse canceller     

Millimeter wave radar with clutter measurements

A portable millimeter wave test radar system, also suitable for battery operation, gives interesting possibilities for clutter recordings at hard-to-reach sites. The designed system covers all common radar frequencies from the Ka- to V-bands and enables spatial detection of targets or clutter elements within an adjustable time gate, whereby spatial clutter profiles of rain can be analyzed. The construction allows full operation with non-scanning antennas as well. This is advantageous when measuring temporal RCS variations of selected targets or surface clutter from snow dunes.     

基于杂波子空间估计的MIMO雷达降维STAP研究

 多输入多输出(MIMO)雷达是近年来出现的一种新体制雷达,针对MIMO体制的机载雷达开展空时自适应处理（STAP）技术研究是值得进一步努力的方向。本文研究了机载MIMO雷达STAP技术的降维算法,通过对STAP技术杂波抑制原理进行分析,推导并得到一种基于杂波子空间的降维算法。结合扁长椭球波函数（PSWF）的特点,提出了一种基于杂波子空间估计的降维算法,并与若干降维算法的杂波抑制性能进行比较。结果表明,当存在阵元幅相误差时,该算法在保持杂波抑制性能的同时能够有效地降低STAP算法的运算量。     

Optimum Processing of Unequally Spaced Radar Pulse Trains for Clutter Rejection

A train of radar pulses from one resolution cell can be processed coherently to reject echoes from external clutter and detect targets moving radially with respect to the clutter. Optimum methods of signal processing are defined for systems in which the interpulse spacings are multiply staggered to avoid target blind speeds. Likelihood ratio tests are developed for systems in which the target Doppler frequency is known a priori and for systems employing a bank of filters to cover the target Doppler band. To implement such tests, the N pulses in the train are added with complex weights and the amplitude of the sum compared with a detection threshold. The set of weights which maximizes the average signal-to-clutter ratio is also computed for a single-filter system with unknown target Doppler frequency. When the clutter autocorrelation function is exponential, the clutter covariance matrix can be inverted analytically. This latter result is useful for comparing different interpulse-spacing codes for a particular system application.     

MTI Optimization in a Multiple-Clutter Environment

A means of optimizing a moving target indicator (MTI) filter for rejecting several types of clutter, which are generated by different mechanisms such as by rain or the ground, is formulated. lt is found that the optimal performance of such a filter depends on the spectral density functions, average radar cross sections, and the relative mean Doppler frequencies of each type of clutter. lt is shown that the optimal improvement factor of such a filter is bounded by the weighted average (weighted in accordance with the radar cross sections of the clutter types) of the improvement factor for the individual clutter type. lt is also shown that the improvement factor of such a filter is a function of the relative mean Doppler frequency f0 between the clutter types. As f0 increases, the performance of the MTI system degrades. The worst improvement factor occurs when f0 is equal to half of the radar pulse-repetition frequency (PRF).     

Sum-difference Reduced-dimensional Processing in SAR Image Domain and Statistical Analysis for Ground Moving Target Indication

In this article, a new reduced-dimensional adaptive processing algorithm based on joint pixels sum-difference data for clutter rejection is proposed. The sum-difference data are obtained by orthogonal projection of the joint pixels data of different synthetic aperture radar (SAR) images generated by a multi-satellite radar system. In the sense of statistical expectation, the sum-differ- ence data contain the common and different information of the SAR images. Therefore, the objective of clutter cancellation can be achieved by adaptive processing. Moreover, based on the residual image after clutter rejection, statistical analysis of constant false-alarm rate (CFAR) detection of moving targets is also presented. Simulation results demonstrate the effectiveness and robustness of the proposed algorithm even with heterogeneous clutter and image co-registration error.     

Adaptive cancellation method for geometry-induced nonstationary bistatic clutter environments

This paper describes and characterizes a new bistatic space-time adaptive processing (STAP) clutter mitigation method. The approach involves estimating and compensating aspects of the spatially varying bistatic clutter response in both angle and Doppler prior to adaptive clutter suppression. An important feature of the proposed method is its ability to extract requisite implementation information from the data itself, rather than rely on ancillary - and possibly erroneous or missing - system measurements. We justify the essence of the proposed method by showing its ability to align the dominant clutter subspaces of each range realization relative to a suitably chosen reference point as a means of homogenizing the space-time data set. Moreover, we numerically characterize performance using synthetic bistatic clutter data. For the examples considered herein, the proposed bistatic STAP method leads to maximum performance improvements between 17.25 dB and 20.75 dB relative to traditional STAP application, with average improvements of 6 dB to 10 dB.     

基于实测数据的海杂波时空相关性分析

海杂波的相关特性分为时间相关性和空间相关性,二者均与雷达系统参数、环境条件等多种因素有关。文章利用X波段雷达实测海杂波数据,重点研究了不同极化条件下海杂波的时间相关性、高低典型海况和不同入射余角条件下的海杂波距离向和方位向空间相关性。经大量实测数据验证表明,极化方式对海杂波强时间相关性影响较小,海杂波距离向空间相关性受海况影响较大、方位向相邻分辨单元空间相关性较弱,这些结论对于海杂波中目标检测方法优化设计具有重要意义。     

Radar detection in clutter

Clutter is defined as any unwanted radar return. The presence of clutter in a range/Doppler cell complicates the detection of a target return signal in that cell. In order to quantify the effect of clutter on the probability of detection, we must first specify sets of models suitable for representing the clutter and target. The simplest and most common model for clutter is based on the gamma density. We include two additional models, the NCG and NCGG clutter models for low grazing angles. They are motivated by physical arguments, the latter of which can accommodate the well-known phenomenon of speckle. Using one of these models for clutter together with one of several models for targets, we determine, in a range/Doppler cell, expressions for probabilities of detection of a target in the presence of clutter. It is important to control the probability of false alarms. The presence of clutter in a cell necessitates an increase in the detection threshold setting in order to control false alarms, thus lowering the probability of detection. If the clutter level is unknown, then we need to take measurements of the clutter and use it to adjust the threshold. The more clutter samples we take, the better the estimate of the clutter level and the less is the resulting detection loss. Using the expressions for the probability of detection in clutter, we can quantify the detection loss for a pair of commonly used constant false-alarm rate (CFAR) techniques and investigate how the loss varies with different parameter values, especially with regard to the number of clutter samples taken to estimate the clutter level.     

Optimal polarimetric detection of radar target in a slowlyfluctuating environment of clutter

It is shown that in a situation where a radar target is distant enough from the radar and is included in a natural or artificial clutter environment in such a manner that the conventional detection methods fail, it is possible to improve the radar detection performance by using appropriate signal processing on two orthogonal polarization states. A CFAR (constant false alarm rate) polarimetric detection system based on the study of the polarization difference between clutter and target is proposed. Since the polarization state of the clutter echoes fluctuates slowly from cell to cell, an autoregressive model can be applied to the components of the polarization vector to predict the detection thresholds needed to follow the polarization state variation. The detection thresholds are determined to maintain a false alarm probability equal to 10^-6. The presence of a target registers as a significant variation of the estimation error of the polarization vector. Results obtained from measurements of simple and canonical targets with artificial clutter are presented, and these results validate the principle of polarimetric detection     

Threshold Control for Automatic Detection in Radar Systems

In automatic detection in radar systems an estimate of background clutter power is used to set the detection threshold. Usually detection cells surrounding the cell under test for the presence of a target are used to estimate the clutter power. In the research reported herein, the target location is taken to be uncertain and thus returns from a target could corrupt this clutter power estimate. It is shown how the threshold should be varied to compensate for the resulting degradation in detection performance. The threshold control procedure is based on a priori information about target location that could be supplied by the radar's tracking system. In addition, a simple procedure for calculating detection and false alarm probabilities for Swerling II target models is presented.     

基于杂波对消-自聚焦的多通道SAR-GMTI

对超高频(UHF)波段多通道合成孔径雷达(SAR)动目标检测技术进行研究,解决了长相干积累时间导致动目标在方位向散焦严重的问题。采用分块自聚焦技术对多通道SAR地面移动目标指示(GMTI)系统自适应杂波抑制后的SAR图像进行处理,改善杂波抑制后的SAR图像中动目标的聚焦情况,增强动目标与周围剩余杂波的对比度,进而提高恒虚警率(CFAR)检测的性能。与传统杂波抑制后直接进行CFAR检测方法相比较,该方法降低了检测虚警概率。实测数据处理结果显示动目标的信杂比明显提高,动目标方位向聚焦成功,证明了该方法的有效性。     

机载MIMO雷达空时自适应杂波对消器

针对机载多输入多输出(MIMO)雷达杂波分布呈现空时耦合特性,提出一种空时自适应杂波对消器.利用机载MIMO雷达的脉冲回波数据,构造杂波对消器的系数矩阵.通过空时自适应杂波对消器的预处理,可以有效地抑制杂波,并通过与常规空时处理算法的级联,最终可以有效提高动目标的检测性能.实现了由传统地基雷达杂波对消器向机载运动平台的推广.仿真结果表明,这种自适应杂波对消器不仅适用于正侧视雷达,对于非正侧视雷达也同样适用.     

A relative clutter metric

Clutter plays a very important role in the area of machine and human-in-the-loop target acquisition. A great deal of interest has recently been shown in assessing several different definitions of clutter. In spite of so many definitions available, no single clutter definition has been agreed on by the infrared community as being the best. We develop a new clutter metric, called relative clutter, which is based on factor analysis which is extensively used for statistical analysis. This relative clutter combines many definitions of clutter. Different methods for calculating the relative clutter based on the magnitude of the eigenvalues obtained from the correlation matrix are suggested. The relative clutter of many images is analyzed     

Detection probability using relative clutter in infrared images

Clutter plays a very important role in the area of machine and human-in-the-loop target acquisition. A great deal of interest has recently been shown in assessing several different definitions of clutter. In spite of so many definitions available, no single clutter definition has been agreed on by the target acquisition modeling community as being the best. Here we develop a new clutter metric, called relative clutter, based on factor analysis which is extensively used for statistical analysis. This relative clutter combines many definitions of clutter. Different methods for calculating the relative clutter based on the magnitude of the eigenvalues obtained from the correlation matrix are suggested. The relative clutter of many images is analyzed. The relative clutter is used to calculate probability of detection on Night Vision Lab (NVL) Terrain Board Infrared images     

基于稀疏重建的MIMO-OTH雷达多模杂波抑制算法

针对由多模传播引起的多普勒扩展杂波(SDC)严重影响天波超视距雷达(OTHR)对慢速船舰目标的检测这一问题,在基于多输入多输出体制的新一代天波超视距(MIMO-OTH)雷达系统下,利用空域信息抑制多模SDC。传统处理方法需要目标角度先验信息,而在实际中,该信息往往很难获得。为此,提出一种新的基于稀疏重建的多模杂波抑制算法。该算法将二维的稀疏角度搜索转变为一维的角度搜索,使运算量大大降低,且估计出的收发角(DOA-DOD)自动配对,同时可获得各个传播路径下信号的时间多普勒信息,达到了理想的MIMO-OTH雷达多模杂波抑制效果。仿真结果证明了所提算法的有效性。