An Adaptive Array Signal Processing Algorithm for Communications

An algorithm is described for initial synchronization in a communication system with a digital adaptive array. This algorithm can also be used for message extraction. A set of consecutive complex video samples of the array output is processed to obtain optimum adaptive array weights, based on a least mean square (LMS) error criterion. This computation is performed for each of the possible alternative signals which may be present during an observation interval. The correct synchronization time or message symbol is selected as the one which yields the minimum LMS error. Assuming orthogonality of the alternative codes, a probability distribution for the output of this processor has been derived.     

Optimum Processing of Unequally Spaced Radar Pulse Trains for Clutter Rejection

A train of radar pulses from one resolution cell can be processed coherently to reject echoes from external clutter and detect targets moving radially with respect to the clutter. Optimum methods of signal processing are defined for systems in which the interpulse spacings are multiply staggered to avoid target blind speeds. Likelihood ratio tests are developed for systems in which the target Doppler frequency is known a priori and for systems employing a bank of filters to cover the target Doppler band. To implement such tests, the N pulses in the train are added with complex weights and the amplitude of the sum compared with a detection threshold. The set of weights which maximizes the average signal-to-clutter ratio is also computed for a single-filter system with unknown target Doppler frequency. When the clutter autocorrelation function is exponential, the clutter covariance matrix can be inverted analytically. This latter result is useful for comparing different interpulse-spacing codes for a particular system application.     

Effect of Envelope Limiting in Adaptive Array Control Loops

The properties of an adaptive array antenna, including transient response rate and control loop noise, depend on the intensity of the external noise field. This dependence can be reduced by envelope hard limiting in the control loops, without degrading the performance of the adaptive array.     

Theory of Adaptive Radar

This paper reviews the principles of adaptive radar in which both the spatial (antenna pattern) and temporal (Doppler filter) responses of the system are controlled adaptively. An adaptive system senses the angular-Doppler distribution of the external noise field and adjusts a set of radar parameters for maximum signal-to-interference ratio and optimum detection performance. A gradient technique for control of the radar array/filter weights is described and shown to generate weights which asymptotically approach optimum values. Simulation results illustrate the convergence rate of adaptive systems and the performance improvement which can be achieved.     

Heavy ion induced changes in small intestinal parameters.

The effects on 17 different structural parameters of mouse small intestine three days after treatment with three types of heavy ion (neon, iron and niobium) are compared, the first two being of particular relevance to space flight. The data for niobium are given in full, showing that changes after niobium ion treatment are not standard and are concentrated in the epithelial compartment, with few of the parameters having a response which is dose dependent. When comparisons are made for the three types of heavy ion, the damage is greatest after neon ion irradiation, implying that the additional non-epithelial damage produced as LET rises from X rays through neutrons to neon ions is not necessarily maintained as LET continues to rise. Further understanding is therefore needed of the balance between changes affecting the vascular and absorptive components of the organ. Variation from group to group is also important, as is variation of strain or gastrointestinal status. All such factors are important in the understanding of changes in multicellular organs after exposure to heavy ion radiation.     

Rapid Convergence Rate in Adaptive Arrays

In many applications, the practical usefulness of adaptive arrays is limited by their convergence rate. The adaptively controlled weights in these systems must change at a rate equal to or greater than the rate of change of the external noise field (e.g., due to scanning in a radar if step scan is not used). This convergence rate problem is most severe in adaptive systems with a large number of degrees of adaptivity and in situations where the eigenvalues of the noise covariance matrix are widely different. A direct method of adaptive weight computation, based on a sample covariance matrix of the noise field, has been found to provide very rapid convergence in all cases, i.e., independent of the eigenvalue distribution. A theory has been developed, based on earlier work by Goodman, which predicts the achievable convergence rate with this technique, and has been verified by simulation.     

Overview and status of a mirror fusion propulsion system design study

The main goal of this paper is to describe and emphasize the important discoveries made since 1986 in the engineering design of space fusion propulsion plants.

Among the important discoveries are four fundamental design principles (DPs) which should be used when adapting candidate Earth-based fusion-electric power plants to propulsion in space.

1. DP1. Maximize direct access to space for waste radiation.

2. DP2. Operate components as passive radiators whenever possible.

3. DP3. Optimize the plasma characteristics for best specific jet power

4. DP4. Optimize mission capability versus lifetime-mass-to-orbit (LMTO).

Another discovery is a design philosophy called IDEAs (Integrated Design Environment Algorithms) which is a tool for discovering new fundamental design principles.

These discoveries allowed us to adapt, and then to optimize, an earth-based fusion-electric magnetic-mirror-fusion reactor concept for propulsion in space. The resulting design is called the Mirror Fusion Propulsion System (MFPS); and its design status is reviewed.

This work can be used as a general road map for others attempting to convert earth-based designs to propulsion in space. It also has applicability to matter-antimatter propulsion systems engineering.     

Effect of Single-Bit Digitization in Adaptive Array Control Loops

The properties of an adaptive array antenna, including transient response rate and control loop noise, depend on the intensity of the external noise field. The dependence can be reduced by 1-bit digitization of the real and imaginary parts of the signals from which the envelopes in the control loops are formed. This can be done without degrading the performance of the adaptive array.     

Control-Loop Noise in Adaptive Array Antennas

Adaptive array receiving antennas can be designed to sense the external noise field and to optimize the array illumination function. A substantial improvement in signal-to-noise ratio can be obtained with adaptive arrays when the external noise field is nonuniformly distributed in angle. The external noise process may be time varying and contain both discrete sources and continuously distributed sources. Two adaptive array implementations which maximize the signal-to-noise ratio are described in this paper. Expressions are derived for control-loop noise, i.e., the variance of the array element weights, and for the additional noise in the array output due to this element weight noise. It is shown that both the element weight noise and the array convergence rate are determined by the eigenvalues of the noise covariance matrix.     

Angle Estimation with Adaptive Arrays in External Noise Fields

A method of estimating the angle of arrival of a signal at an array of sensors in an external noise environment is outlined. The development is based on a maximum likelihood estimator and leads naturally to adaptive sum and difference beams which null the external noise sources. An algorithm for estimating angle of arrival, based on the outputs of adaptively distorted sum and differnce beams, is shown to perform well in the presence of sidelobe and/or main beam interference.